Laser radar
FL-1030-Pico: 1030 nm emission determines compatible optics, coatings and detectors for Laser radar. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Fiber output, PM options, seed formats
FL-1030-Pico1030 nm near-infrared fiber laser
1030 nmFL-1030-Pico is a 1030 nm Fiber laser. Used for laser radar, precision marking, precision drilling, life science. Pulse width 10 0-900 ps fixed. Key specifications: output / average power 10-5000 mW, operating mode Pulsed, power stability (rms, 4 hours, ±3℃) <3%, <2%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-1030-Pico
18 specification rows
| Output / average power | 10-5000 mW |
|---|---|
| Beam / notes | Pulse width 100-900 ps fixed |
| Operating mode | Pulsed |
| Power stability (rms, 4 hours, ±3℃) | <3%, <2% |
| Pulse duration (ps) | 100-900 |
| Rep. rate | 100kHz-20MHz |
| M2 | <1.2 / <1.8 |
| Fiber connector | FC/APC, Collimator optional |
| Fiber length (m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Polarization ratio (dB) | Random / >15 |
| Warm-up time (minutes) | <15 |
| Cooled method | Air cooled |
| Operating temperature (℃) | 15-35 |
| Operating voltage (VDC/VAC) | 12V/11.5A |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1030±1 |
Application context
Why this design is used
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
Precision marking
FL-1030-Pico: Precision marking depends on how optical energy is delivered to the target; 1030 nm emission governs absorption, while the listed temporal parameter (100-900) governs peak intensity and heat deposition.
Precision drilling
FL-1030-Pico: 1030 nm emission determines compatible optics, coatings and detectors for Precision drilling. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Life science
FL-1030-Pico: 1030 nm emission determines compatible optics, coatings and detectors for Life science. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
System integration
Integration and compatibility
Use these checks to connect FL-1030-Pico to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Fiber delivery interface
- Fiber connector: FC/APC, Collimator optional
- Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
- Thermal management
- Cooled method: Air cooled · Operating temperature (℃): 15-35
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- M2: <1.2 / <1.8 · Beam diameter (mm): 4±1 (Collimator output)
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for FL-1030-Pico
How is the FL-1030-Pico output delivered?
Fiber connector: FC/APC, Collimator optional. Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
What cooling does the FL-1030-Pico require?
Cooled method: Air cooled · Operating temperature (℃): 15-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the FL-1030-Pico deliver?
M2: <1.2 / <1.8 · Beam diameter (mm): 4±1 (Collimator output). Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FL-1030-Pico with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | FL-1030-Pico (current) | FL-1030-SLM | FL-1030-LN-L |
|---|---|---|---|
| Wavelength | 1030 nm | 1030 nm | 1030 nm |
| Optical power / pulse energy | 10-5000 mW | 1~10 W | 1~10 W |
| Operating mode / pulse width | Pulsed | CW | CW |
| Beam quality | Confirm for this model | <1.1 | TEM00 |
Related fiber lasers
Compare the FL-1030-Pico with nearby fiber lasers across the wavelength range.
