Fiber output, PM options, seed formats
FL-1030-CW1030 nm near-infrared high-power fiber laser
1030 nmThe FL-1030-CW is a 1030 nm continuous-wave fiber laser. Pump energy is supplied to an active fiber, which guides the light and provides optical gain as it propagates. Output coupling then delivers the amplified beam to the experiment. Continuous-wave operation provides a sustained beam for experiments that need steady illumination.
Specifications
FL-1030-CW
23 specification rows
| Operating mode | CW |
|---|---|
| Output / average power | 1~100 W |
| Beam / notes | CW or modulated |
| Single pulse energy (nJ) | 1-500 |
| Rep. Rate( | 20-120 |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1 |
| M2 | <1.2 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1030±2 |
| Power stability (rms, 4 hours ±3℃) | <3%, <2%, <1% |
| Fiber connector | FC/APC, Collimator optional |
| Fiber length (m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Polarization state | Random |
| Operating voltage (VDC/VAC) | 12V/11.5A or 110/220VAC |
What do you need?
Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FL-1030-CW with the closest available models in the Fiber Lasers family.
| Selection parameter | FL-1030-CW (current) | FL-1030-SLM | FL-1030-LN-L |
|---|---|---|---|
| Wavelength | 1030 nm | 1030 nm | 1030 nm |
| Optical power / pulse energy | 1~100 W | 1~10 W | 1~10 W |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | TEM00 | <1.1 | <1.1 |
Related fiber lasers
Compare the FL-1030-CW with nearby fiber lasers across the wavelength range.
