Back to Home

Fiber output, PM options, seed formats

FL-H-515-PS515 nm green fiber laser

515 nm

The FL-H-515-PS is a 515 nm picosecond fiber laser. Pump energy is supplied to an active fiber, which guides the light and provides optical gain as it propagates. Output coupling then delivers the amplified beam to the experiment. Pulse duration sets how briefly the energy is delivered, while repetition rate sets the interval between pulses; average power alone does not describe the peak intensity at the sample. The quoted power range represents factory-set configurations; specify the required output rating when ordering.

Specifications

FL-H-515-PS

20 specification rows

Output / average power1-5 W
Beam / notesPulse width <10 ps
Wavelength (nm)515±1
Operating modePulsed
Single pulse energy (nJ)62.5 (62.5nJ @80MHz); 125 (125nJ @40MHz)
Rep. rate (MHz)20-120
Pulse duration (ps)<8ps; or one fixed value between 10 ps-150 ps
Peak power (kW)6.25kW @80MHz/10ps; 12.5kW@40MHz/10ps
Ave power stability (rms, 4 hours±3℃)<2%, <1%
Warm-up time (minutes)<10
Transverse modeTEM00
M²<1.2
Beam divergence, full angle (mrad)<1.0
Beam diameter at the aperture (1/e2,mm)~2
Polarization ratio>100:1 Horizontal
Beam height from base plate (mm)118
Cooled methodAir cooled
Operating temperature (℃)15-35
Power supply (100-240VAC)12V/6.67A
Expected lifetime (hours)>10000

What do you need?

Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare FL-H-515-PS with the closest available models in the Fiber Lasers family.

Selection parameterFL-H-515-PS (current)FL-515-SLMFL-515-LN-L
Wavelength515 nm515 nm515 nm
Optical power / pulse energy1-5 W1~2000 mW1~2000 mW
Operating mode / pulse widthPulsedCWCW
Beam quality<1.2<1.1<1.1