Optical instrumentation
MGL-540(FC): 540 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
PIV, confocal, wafer, marking systems
MGL-540(FC)540 nm green laser system
540 nmMGL-540(FC) is a 540 nm Application Systems. Key specifications: output / average power 1~450 mW. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MGL-540(FC)
1 specification rows
| Wavelength | 540 nm |
|---|---|
| Output / average power | 1~450 mW |
Series-level technical context
Engineering context for a thin Application Systems record
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 12 wavelength-near application systems records; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
Typical operating fields in the series
- • Output / average power: 1~27 mW
- • Output / average power: 1~1400 mW
- • Output / average power: 1~3600 mW
- • Operating mode: Passively Q-switched
- • Operating mode: CW
Beam-quality tolerance context
Nearby series records state M²: <1.2, Beam divergence, full angle (mrad): <1.5, Beam divergence (mrad): <1.5, and Pointing stability over temperature (μrad/°C): <8. These are series context, not guaranteed values for MGL-540(FC); confirm them on the order-specific datasheet.
Optical integration schematic
- Step 1Laser head and temperature-stabilized base
- Step 2Safety shutter and optional optical isolator
- Step 3Beam steering, expansion or fiber-launch optics
- Step 4Experiment input with wavelength-matched coatings
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Laboratory measurement
MGL-540(FC): Laboratory measurement benefits from a stable, focusable source. 540 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MGL-540(FC) with the closest available models in the Application Systems family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MGL-540(FC) (current) | MGL-537(FC) | MGL-543(FC) |
|---|---|---|---|
| Wavelength | 540 nm | 537 nm | 543 nm |
| Optical power / pulse energy | 1~450 mW | 1~27 mW | 1~1400 mW |
| Operating mode / pulse width | Confirm for this model | Confirm for this model | Confirm for this model |
| Beam quality | Confirm for this model | Confirm for this model | Confirm for this model |
Related application systems
Compare the MGL-540(FC) with nearby application systems across the wavelength range.
