Marking
EO-266W: Marking depends on how optical energy is delivered to the target; 266 nm emission governs absorption, while the listed temporal parameter (60 uJ) governs peak intensity and heat deposition.
Pulse energy, repetition rate, pulse width
EO-266W266 nm deep-UV Q-switched pulsed laser
266 nmEO-266W is a 266 nm Pulsed laser. Used for marking, carving, measure, research. Key specifications: output / average power 3000 mW, pulse energy 60 uJ, repetition rate 10-100 kHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
EO-266W
21 specification rows
| Output / average power | 3000 mW |
|---|---|
| Pulse energy | 60 uJ |
| Repetition rate | 10-100 kHz |
| Pulse width | <5 ns |
| Operating mode | Actively Q-switched |
| Power stability (rms, 4 hours ± 3°C) | <2%, <1% |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1.5 |
| Polarization ratio | >100:1 Vertical |
| Warm-up time (minutes) | <10 |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-35 |
| Operating voltage (VDC) | 24V/31.1A |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 266±1 |
| Average power (W) | 3@50kHz |
| Single pulse energy (µJ) | >60@50kHz |
| Rep. rate | 10-100kHz |
| Pulse duration (ns) | <5 |
| Beam diameter at the aperture (1/e2, mm) | ~2 |
| Beam height from base plate (mm) | 150 |
Application context
Why this design is used
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
Carving
EO-266W: 266 nm emission determines compatible optics, coatings and detectors for Carving. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
Measure
EO-266W: Measure benefits from a stable, focusable source. 266 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (TEM00) informs waist size and propagation.
Research
EO-266W: 266 nm emission determines compatible optics, coatings and detectors for Research. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
System integration
Integration and compatibility
Use these checks to connect EO-266W to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Cooled method: Water cooled · Operating temperature (℃): 15-35
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: TEM00 · Beam divergence, full angle (mrad): <1.5
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for EO-266W
What cooling does the EO-266W require?
Cooled method: Water cooled · Operating temperature (℃): 15-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the EO-266W deliver?
Transverse mode: TEM00 · Beam divergence, full angle (mrad): <1.5. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare EO-266W with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | EO-266W (current) | MPL-Q-266 | MPL-Q1-266 |
|---|---|---|---|
| Wavelength | 266 nm | 266 nm | 266 nm |
| Optical power / pulse energy | 3000 mW | 1~30 mW | 10 mW |
| Operating mode / pulse width | 10-100 kHz | 3-12 kHz | 1 kHz |
| Beam quality | TEM00 | Near TEM00 | Near TEM00 |
Related pulsed lasers
Compare the EO-266W with nearby pulsed lasers across the wavelength range.
