SLM, narrow linewidth, coherence
MSL-R-607 is a 607 nm Single-Frequency laser. Used for dna sequencing, flow cytometry, cell sorting, optical instruments. M²: <1.5. Key specifications: output / average power 200~1000 mW, spectral linewidth <5 MHz, optical noise <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
20 specification rows
| Wavelength | 607 nm |
|---|---|
| Output / average power | 200~1000 mW |
| Spectral linewidth | <5 MHz |
| Optical noise | <0.5% |
| M² | <1.5 |
| Power stability (rms, over 4 hours) | <3%, <2%, <1% |
| Transverse mode | TEM00 |
| Longitudinal mode | Single |
| Operating mode | CW |
| Noise of amplitude (rms, 20Hz~20MHz) | <0.5% |
| Beam diameter at the aperture (1/e2, mm) | ~1.5 |
| Beam divergence, full angle (mrad) | <1.5 |
| Polarization Ratio | >100:1, Vertical (Horizontal Optional) |
| Pointing stability after warm-up (mrad) | <0.05 |
| Coherent length (m) | >50 |
| Warm-up time (minutes) | <15 |
| Cooled method (Water cooled) | WCH-580 |
| Operating Temperature (°C) | 20-30 |
| Power supply (90-264VAC) | PSU-W-FDA |
| Expected lifetime (hours) | 10000 |
| Warranty | 1 year |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
MSL-R-607: 607 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
MSL-R-607: 607 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
MSL-R-607: 607 nm emission determines compatible optics, coatings and detectors for Cell sorting. The catalogued beam parameter (<1.5) helps predict how the source will focus and propagate through the instrument.
MSL-R-607: 607 nm emission determines compatible optics, coatings and detectors for Optical instruments. The catalogued beam parameter (<1.5) helps predict how the source will focus and propagate through the instrument.
System integration
Use these checks to connect MSL-R-607 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method (Water cooled): WCH-580 · Operating Temperature (°C): 20-30. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
M²: <1.5 · Transverse mode: TEM00. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MSL-R-607 with the closest available models in the Single-Frequency Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MSL-R-607 (current) | 607 | MGL-SF-597-N |
|---|---|---|---|
| Wavelength | 607 nm | 607 nm | 597 nm |
| Optical power / pulse energy | 200~1000 mW | 1~200 mW | 1~30 mW |
| Operating mode / pulse width | CW | Confirm for this model | CW |
| Beam quality | <1.5 | <1.2 | Near TEM00 |
Compare the MSL-R-607 with nearby single-frequency lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide