Fiber output, PM options, seed formats
FL-355355 nm UV fiber laser
355 nmThe FL-355 is a 355 nm nanosecond laser source. Pulse duration sets how briefly the energy is delivered, while repetition rate sets the interval between pulses; average power alone does not describe the peak intensity at the sample. Pulses lasting approximately 3 ns deliver the energy in a brief interval; pulse energy and focused spot size determine the intensity at the sample.
Specifications
FL-355
20 specification rows
| Output / average power | 1~1000 mW |
|---|---|
| Pulse energy | 1~50 uJ |
| Repetition rate | ~20 kHz |
| Pulse width | ~3 ns |
| Operating mode | Passively Q-switched |
| Power stability (rms, 4 hours ± 3°C) | <3%, <2%, <1% |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | ~1.0 |
| Polarization ratio | >100:1 Vertical |
| Warm-up time (minutes) | <15 |
| Operating temperature (℃) | 10-35 |
| Operating voltage (VDC) | PSU-FL-FDA (12V/25A) / PSU-FL-OEM (12V/25A) |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 355±1 |
| Single pulse energy (µJ) | 1-50 |
| Rep. rate | ~20kHz |
| Pulse duration (ns) | ~3 |
| Peak power (kW) | 1-15 |
| Beam diameter at the aperture (mm) | ~6.0 |
| Beam height from base plate (mm) | 23.5 |
What do you need?
Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FL-355 with the closest available models in the Fiber Lasers family.
| Selection parameter | FL-355 (current) | MPL-FL-355 | FL-355-PS |
|---|---|---|---|
| Wavelength | 355 nm | 355 nm | 355 nm |
| Optical power / pulse energy | 1~1000 mW | 1~1000 mW | 1~50 mW |
| Operating mode / pulse width | Passively Q-switched | Passively Q-switched | Passively Q-switched |
| Beam quality | TEM00 | TEM00 | TEM00 |
Related fiber lasers
Compare the FL-355 with nearby fiber lasers across the wavelength range.
