Power stability, linewidth, beam quality
MLL-FN-698698 nm red CW laser
698 nmThe MLL-FN-698 is a 698 nm continuous-wave diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Continuous-wave operation provides a sustained beam for experiments that need steady illumination.
Specifications
MLL-FN-698
20 specification rows
| Output / average power | 1~1000 mW |
|---|---|
| Beam / notes | Laser |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Warm-up time (minutes) | <5 |
| Pointing stability over temperature (urad/°C) | <8 |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA |
| Operating voltage (VDC) | PSU-SR-OEM (12V/25A) |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 698±1 |
| Power stability (rms, 4 hours ±3°C) | <2%, <1%, <0.5% |
| Spectral line width (nm) | <0.1, (<0.003 optional@1-300) |
| Noise of amplitude (rms, 20Hz-20MHz) | <1% |
| M² | <1.5 |
| Beam diameter at the aperture (1/e2, mm) | <2.0 |
| Beam divergence, full angle (mrad) | <1.5 |
| Pointing stability (urad) (over 2 hours after warm-up and±3°C) | <50 |
| Beam height from base plate (mm) | 27.4 |
What do you need?
Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MLL-FN-698 with the closest available models in the CW Lasers family.
| Selection parameter | MLL-FN-698 (current) | MSL-FN-698 | MSL-R-698 |
|---|---|---|---|
| Wavelength | 698 nm | 698 nm | 698 nm |
| Optical power / pulse energy | 1~1000 mW | 1~300 mW | 300~1000 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | <1.5 | <1.2 | <1.3 |
Related cw lasers
Compare the MLL-FN-698 with nearby cw lasers across the wavelength range.
