Power stability, linewidth, beam quality
MRL-FN-679679 nm red CW laser
679 nmThe MRL-FN-679 is a 679 nm continuous-wave diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command.
Specifications
MRL-FN-679
18 specification rows
| Output / average power | 1~500 mW |
|---|---|
| Beam / notes | Laser |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Beam diameter at the aperture (1/e2, mm) | <1.5 |
| Polarization ratio | >100:1, Vertical (Horizontal optional) |
| Warm-up time (minutes) | <5 |
| Pointing stability over temperature (μrad/°C) | <8 |
| Operating temperature (°C) | 10-35 |
| Modulation optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
| Power supply (100-240VAC) | PSU-H-FDA/ PSU-H-LED/PSU-SR |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 679±1 |
| Power stability (rms, 4 hours ±3°C) | <3%, <2%, <1% |
| M² | <1.5 |
| Beam divergence, full angle (mrad) | <1.5 |
| Pointing Stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 27.4 |
What do you need?
Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MRL-FN-679 with the closest available models in the CW Lasers family.
| Selection parameter | MRL-FN-679 (current) | MRL-FN-678 | MLL-III-680 |
|---|---|---|---|
| Wavelength | 679 nm | 678 nm | 680 nm |
| Optical power / pulse energy | 1~500 mW | 1~100 mW | 1~1500 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | <1.5 | <1.5 | <3.0 |
Related cw lasers
Compare the MRL-FN-679 with nearby cw lasers across the wavelength range.
