Pulse energy, repetition rate, pulse width
DPS-1064-P-Mini1064 nm near-infrared Q-switched pulsed laser
1064 nmThe DPS-1064-P-Mini is a 1064 nm nanosecond diode-pumped solid-state laser. The specified pulse energy is 6 mJ (Mini-I); 5 mJ (Mini-II). Select energy, timing and cooling for the same configuration. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Q-switching stores energy in the gain medium while resonator losses are high, then lowers those losses to release a pulse. Pulse energy and repetition rate must be considered together, because changing the pulse spacing changes the average power for a fixed pulse energy.
Specifications
DPS-1064-P-Mini
14 specification rows
| Wavelength (nm) | 1064 |
|---|---|
| Operating mode | Passively Q-switched |
| Pulse energy | 6 mJ (Mini-I); 5 mJ (Mini-II) |
| Repetition rate | 10–20 Hz |
| Pulse width | 3 ±1 ns |
| Cooling | Conduction cooled |
| Configuration notes | The datasheet requires 1–3 minutes of operation followed by 1–3 minutes of rest. Both internal and external triggering are supported; confirm the Mini-I or Mini-II configuration. |
| Energy stability (std dev/mean) | <5%, <3%, <2% |
| Beam divergence, full angle (mrad) | <3 / / |
| Pointing stability over temperature (urad/°C) | <50 / / |
| Operating temperature (℃) | 15-30 |
| Operating voltage (VDC) | PSU-DPS-P-Mini-I/ PSU-DPS-P-Mini-II (24V/18.8 A) |
| Expected lifetime (pulses) | 109 |
| Beam height from base plate (mm) | 28 |
Select energy and timing together
Specify pulse energy, repetition rate, pulse duration, trigger requirements and cooling for the same configuration. The maximum energy and maximum repetition rate can describe different variants. Energy per pulse is quoted in μJ, mJ or J; pulse duration is quoted in ps, ns or ms.
The datasheet requires 1–3 minutes of operation followed by 1–3 minutes of rest. Both internal and external triggering are supported; confirm the Mini-I or Mini-II configuration.
Compare high-energy laser models →What do you need?
Tell us the pulse energy, pulse width, repetition rate, trigger and cooling requirements you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare DPS-1064-P-Mini with the closest available models in the Pulsed Lasers family.
| Selection parameter | DPS-1064-P-Mini (current) | FS-H-1064A | FS-H-1064B |
|---|---|---|---|
| Wavelength | 1064 nm | 1064 nm | 1064 nm |
| Optical power / pulse energy | 6 mJ (Mini-I); 5 mJ (Mini-II) | 1-500 mW | 500-5000 mW |
| Operating mode / pulse width | Passively Q-switched | Pulsed | Pulsed |
| Beam quality | <3 / / | <1.2 | <1.2 |
Related pulsed lasers
Compare the DPS-1064-P-Mini with nearby pulsed lasers across the wavelength range.
