Pulse energy, repetition rate, pulse width
EO-1064-P-Subnano1064 nm near-infrared Q-switched pulsed laser
1064 nmThe EO-1064-P-Subnano is a 1064 nm nanosecond diode-pumped solid-state laser. The specified pulse energy is 1–1000 μJ at 2 kHz; 1–200 μJ at 50 kHz. Select energy, timing and cooling for the same configuration. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Q-switching stores energy in the gain medium while resonator losses are high, then lowers those losses to release a pulse. Pulse energy and repetition rate must be considered together, because changing the pulse spacing changes the average power for a fixed pulse energy. Pulses shorter than 1 ns deliver the energy in a brief interval; pulse energy and focused spot size determine the intensity at the sample.
Specifications
EO-1064-P-Subnano
14 specification rows
| Wavelength (nm) | 1064 |
|---|---|
| Operating mode | Passively Q-switched |
| Pulse energy | 1–1000 μJ at 2 kHz; 1–200 μJ at 50 kHz |
| Repetition rate | 0.5 / 1 / 2 kHz; 10–50 kHz option |
| Pulse width | <1 ns |
| Cooling | Air or water cooled |
| Beam divergence, full angle (mrad) | <3 |
| Warm-up time (minutes) | <15 |
| Operating temperature (℃) | 15-30 |
| Power supply | PSU-EO-P-Subnano (110/220VAC) / 24V/21A |
| Expected lifetime (hours) | >10000 |
| Power stability (rms) | <5%, <3% |
| Beam diameter (mm) | ~3 |
| Subnano-I) | POWER SUPPLY (PSU-EO-P-Subnano) |
Select energy and timing together
Specify pulse energy, repetition rate, pulse duration, trigger requirements and cooling for the same configuration. The maximum energy and maximum repetition rate can describe different variants. Energy per pulse is quoted in μJ, mJ or J; pulse duration is quoted in ps, ns or ms.
Compare high-energy laser models →What do you need?
Tell us the pulse energy, pulse width, repetition rate, trigger and cooling requirements you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare EO-1064-P-Subnano with the closest available models in the Pulsed Lasers family.
| Selection parameter | EO-1064-P-Subnano (current) | FS-H-1064A | FS-H-1064B |
|---|---|---|---|
| Wavelength | 1064 nm | 1064 nm | 1064 nm |
| Optical power / pulse energy | 1–1000 μJ at 2 kHz; 1–200 μJ at 50 kHz | 1-500 mW | 500-5000 mW |
| Operating mode / pulse width | Passively Q-switched | Pulsed | Pulsed |
| Beam quality | <3 | <1.2 | <1.2 |
Related pulsed lasers
Compare the EO-1064-P-Subnano with nearby pulsed lasers across the wavelength range.
