Pulse energy, repetition rate, pulse width
FS-H-1064A1064 nm near-infrared pulsed laser
1064 nmThe FS-H-1064A is a 1064 nm femtosecond fiber laser. Pump energy is supplied to an active fiber, which guides the light and provides optical gain as it propagates. Output coupling then delivers the amplified beam to the experiment. Pulse duration sets how briefly the energy is delivered, while repetition rate sets the interval between pulses; average power alone does not describe the peak intensity at the sample. At the nominal 80 MHz repetition rate, pulses shorter than 150 fs arrive about 12.5 ns apart. The quoted power range represents factory-set configurations; specify the required output rating when ordering.
Specifications
FS-H-1064A
24 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 1-500 mW |
| Repetition rate | 80±2 MHz |
| Single pulse energy (nJ) | 1-6.25 |
| All Fiber Femtosecond pulsed laser at 1064nm | Pulse duration (fs) / <150 |
| pulse | duration, / high |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| M2 factor | <1.2 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Air cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | 12V/6.67A |
| Expected lifetime (hours) | >10000 |
| Pulse width | <150 @80MHz |
| Wavelength (nm) | 1064±5 |
| Rep. rate (MHz) | 80±2 |
| Pulse duration (fs) | <150 |
| Peak power (kW) | 1-41 |
| Beam divergence, full angle (mrad) | <1.0 |
| Beam diameter at the aperture (1/e2,mm) | <2.0 |
| M² | <1.2 |
| Beam height from base plate (mm) | 110 |
What do you need?
Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FS-H-1064A with the closest available models in the Pulsed Lasers family.
| Selection parameter | FS-H-1064A (current) | FS-H-1064B | 1064 |
|---|---|---|---|
| Wavelength | 1064 nm | 1064 nm | 1064 nm |
| Optical power / pulse energy | 1-500 mW | 500-5000 mW | 1-4 W |
| Operating mode / pulse width | Pulsed | Pulsed | Pulsed |
| Beam quality | <1.2 | <1.2 | TEM00 |
Related pulsed lasers
Compare the FS-H-1064A with nearby pulsed lasers across the wavelength range.
