Optical instrumentation
LPS-1064-PS: 1064 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. The catalogued beam parameter (<3) helps predict how the source will focus and propagate through the instrument.
Pulse energy, repetition rate, pulse width
LPS-1064-PS1064 nm near-infrared Q-switched pulsed laser
1064 nmLPS-1064-PS is a 1064 nm Pulsed laser. Rep. rate (Hz): 1-10; Cooled method: Water cooled. Key specifications: pulse energy 100 mJ, repetition rate 1-10 Hz, operating mode Passively Q-switched. View specifications, datasheet and enquiry options from Precisometer.
Specifications
LPS-1064-PS
18 specification rows
| Pulse energy | 100 mJ |
|---|---|
| Repetition rate | 1-10 Hz |
| Beam / notes | Rep. rate (Hz): 1-10; Cooled method: Water cooled |
| Operating mode | Passively Q-switched |
| Pulse duration (ps) | <30 |
| Energy stability (std dev/mean) | <3% |
| Beam diameter (mm) | ~12 |
| Polarization | Vertical |
| Warm-up time (minutes) | <60 |
| Cooled method | Water cooled |
| Operating temperature (℃) | 20-30 |
| Power supply (220VAC) | PSU-LPS-PS |
| Pulse width | <30ps |
| Wavelength (nm) | 1064±1 |
| Single pulse energy (mJ) | >100 |
| Rep. Rate 1 (Hz) | 1-10 |
| Beam divergence, full angle (mrad) | <3 |
| Beam height from base plate (mm) | 162 |
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Laboratory measurement
LPS-1064-PS: Laboratory measurement benefits from a stable, focusable source. 1064 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (<3) informs waist size and propagation.
System integration
Integration and compatibility
Use these checks to connect LPS-1064-PS to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Cooled method: Water cooled · Operating temperature (℃): 20-30
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Beam diameter (mm): ~12 · Polarization: Vertical
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for LPS-1064-PS
What cooling does the LPS-1064-PS require?
Cooled method: Water cooled · Operating temperature (℃): 20-30. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the LPS-1064-PS deliver?
Beam diameter (mm): ~12 · Polarization: Vertical. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare LPS-1064-PS with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | LPS-1064-PS (current) | FS-H- 10 64A | FS-H- 10 64B |
|---|---|---|---|
| Wavelength | 1064 nm | 1064 nm | 1064 nm |
| Optical power / pulse energy | 100 mJ | 1-500 mW | 500-5000 mW |
| Operating mode / pulse width | 1-10 Hz | Pulsed | Pulsed |
| Beam quality | <3 | TEM00 | TEM00 |
Related pulsed lasers
Compare the LPS-1064-PS with nearby pulsed lasers across the wavelength range.
