Curing
MPL-FN-355: 355 nm emission determines compatible optics, coatings and detectors for Curing. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
Pulse energy, repetition rate, pulse width
MPL-FN-355355 nm UV Q-switched pulsed laser
355 nmMPL-FN-355 is a 355 nm Pulsed laser. Used for curing, micro-electronics, cd carving, laser medical treatment. Key specifications: output / average power 1~30 mW, pulse energy 1~15 uJ, repetition rate 10 Hz-3 kHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MPL-FN-355
16 specification rows
| Wavelength | 355 nm |
|---|---|
| Output / average power | 1~30 mW |
| Pulse energy | 1~15 uJ |
| Repetition rate | 10 Hz-3 kHz |
| Pulse width | ~0.6 ns |
| Operating mode | Passively Q-switched |
| Power stability (rms, 4 hours, ±3°C) | <5%, <3%, <2% |
| Transverse mode | TEM00 |
| M2 | <2.0 |
| Beam diameter at the aperture (mm) | ~1.5 |
| Warm-up time (minutes) | <5 |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-SR |
| Expected lifetime (hours) | >10000 |
| M² | <2.0 |
| Beam divergence, full angle (mrad) | <1.5 |
| Beam height from base plate (mm) | 27.4 |
Application context
Why this design is used
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
Micro-electronics
MPL-FN-355: 355 nm emission determines compatible optics, coatings and detectors for Micro-electronics. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
CD carving
MPL-FN-355: 355 nm emission determines compatible optics, coatings and detectors for CD carving. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
Laser medical treatment
MPL-FN-355: 355 nm emission determines compatible optics, coatings and detectors for Laser medical treatment. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
System integration
Integration and compatibility
Use these checks to connect MPL-FN-355 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Operating temperature (℃): 10-35
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: TEM00 · M2: <2.0
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for MPL-FN-355
What cooling does the MPL-FN-355 require?
Operating temperature (℃): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the MPL-FN-355 deliver?
Transverse mode: TEM00 · M2: <2.0. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MPL-FN-355 with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
Related pulsed lasers
Compare the MPL-FN-355 with nearby pulsed lasers across the wavelength range.
