Communication
PGL-V-H-FC-1550: 1550 nm emission must sit inside the fiber-component passband used for Communication; connector polish, fiber mode, linewidth and back-reflection tolerance should be specified as one optical interface.
Power stability, linewidth, beam quality
PGL-V-H-FC-15501550 nm infrared CW laser
1550 nmPGL-V-H-FC-1550 is a 1550 nm CW laser. Used for communication, spectrum analysis, measurement, flow cytometry. Laser. Key specifications: output / average power 1~500 mW, operating mode CW, power stability(rms, over 4 hours) <5%, <3%, <1%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
PGL-V-H-FC-1550
15 specification rows
| Wavelength | 1550 nm |
|---|---|
| Output / average power | 1~500 mW |
| Beam / notes | Laser |
| Operating mode | CW |
| Power stability(rms, over 4 hours) | <5%, <3%, <1% |
| Transverse mode | Multimode |
| Beam divergence, full angle (mrad) | <10 |
| Warm-up time | minutes / <10 |
| Expected lifetime (hours) | 10000 |
| Warranty (years) | 1 |
| Operating voltage(PSU-V-OEM) | 100-240VAC |
| Connection | 9 pin connector |
| Operating temperature | -10°C to 50°C |
| Storage temperature | -20°C to 80°C |
| Humidity | < 90%, non-condensing |
| Dimensions of laser head | 92(L)×40(W)×40(H)mm3 |
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Spectrum analysis
PGL-V-H-FC-1550: 1550 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (Multimode) also controls focusing and collection geometry.
Measurement
PGL-V-H-FC-1550: Measurement benefits from a stable, focusable source. 1550 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (Multimode) informs waist size and propagation.
Flow cytometry
PGL-V-H-FC-1550: 1550 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<5%, <3%, <1%) helps keep measured intensity changes attributable to the sample rather than source drift.
System integration
Integration and compatibility
Use these checks to connect PGL-V-H-FC-1550 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Operating temperature: -10°C to 50°C
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: Multimode · Beam divergence, full angle (mrad): <10
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
- Mechanical envelope
- Dimensions of laser head: 92(L)×40(W)×40(H)mm3
- Verify the housing drawing and bolt length before designing a mount. A laser head rarely carries a table thread itself, so the adapter between it and an M6 or 1/4"-20 grid is part of the specification.
Technical FAQ
Integration questions for PGL-V-H-FC-1550
What cooling does the PGL-V-H-FC-1550 require?
Operating temperature: -10°C to 50°C. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the PGL-V-H-FC-1550 deliver?
Transverse mode: Multimode · Beam divergence, full angle (mrad): <10. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
How is the PGL-V-H-FC-1550 mounted?
Dimensions of laser head: 92(L)×40(W)×40(H)mm3. Verify the housing drawing and bolt length before designing a mount. A laser head rarely carries a table thread itself, so the adapter between it and an M6 or 1/4"-20 grid is part of the specification.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare PGL-V-H-FC-1550 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | PGL-V-H-FC-1550 (current) | FC-OEM-1550 | PGL-LF-1550 |
|---|---|---|---|
| Wavelength | 1550 nm | 1550 nm | 1550 nm |
| Optical power / pulse energy | 1~500 mW | 1~180 mW | 1~10 mW |
| Operating mode / pulse width | CW | Confirm for this model | Confirm for this model |
| Beam quality | Multimode | Confirm for this model | <1.5 |
Related cw lasers
Compare the PGL-V-H-FC-1550 with nearby cw lasers across the wavelength range.
