Power stability, linewidth, beam quality
MLL-F-10301030 nm near-infrared CW laser
1030 nmThe MLL-F-1030 is a 1030 nm continuous-wave solid-state laser. Light is amplified in a solid gain medium inside an optical resonator. The resonator feeds light back through that medium to build the laser beam. The pump arrangement and cooling determine how energy is supplied and waste heat is removed. Continuous-wave operation provides a sustained beam for experiments that need steady illumination.
Specifications
MLL-F-1030
19 specification rows
| Output / average power | 1~100 mW |
|---|---|
| Beam / notes | Fan cooling and heat sink |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3°C) | <3%, <2% |
| Spectral line width (nm) | <0.1 |
| Beam diameter at the aperture (1/e2, mm) | ~2.0 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Warm-up time (minutes) | <5 |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA |
| Operating voltage (VDC) | PSU-SR-OEM (12V/25A) |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1030±2 |
| Transverse mode | TEM00 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1% |
| M² | <1.5 |
| Beam divergence (mrad) | <2.0 |
| Pointing stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 45 |
What do you need?
Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MLL-F-1030 with the closest available models in the CW Lasers family.
| Selection parameter | MLL-F-1030 (current) | TEM-LN-1030 | MLL-III-1030L |
|---|---|---|---|
| Wavelength | 1030 nm | 1030 nm | 1030 nm |
| Optical power / pulse energy | 1~100 mW | 1~500 mW | 1~500 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | <1.5 | <1.1 | <1.1 |
Related cw lasers
Compare the MLL-F-1030 with nearby cw lasers across the wavelength range.
