Back to Home

Power stability, linewidth, beam quality

MSL-FN-335335 nm UV CW laser

335 nm

The MSL-FN-335 is a 335 nm continuous-wave solid-state laser. Light is amplified in a solid gain medium inside an optical resonator. The resonator feeds light back through that medium to build the laser beam. The pump arrangement and cooling determine how energy is supplied and waste heat is removed. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.

Specifications

MSL-FN-335

26 specification rows

Output / average power1~10 mW
Beam / notesLaser
Operating modeCW
Transverse modeTEM00
Longitudinal modeSingle
Spectral line width (nm)<1MHz
Noise of amplitude (rms, 20Hz-20MHz)<1%, <0.5%
M2<1.5
Beam diameter at the aperture (1/e2, mm)<1.0
Beam divergence, full angle (mrad)<1.2
Polarization ratio>100:1, Vertical (Horizontal optional)
Pointing stability Over Temperature(urad/℃)<8
Frequency shift (MHz)(Over±2℃and 8hrs) (optional)<±200
Operating Temperature (°C)10-35
Power supply (100-240VAC)PSU-H-FDA
Expected lifetime (hours)>10000
Wavelength (nm)335±1
Power stability (rms, 4 hours±3℃)<3%, <2%, <1%
Coherent length (m)>50
M²<1.5
Pointing stability (urad) (over 2 hours after warm-up and±3℃)<50
Frequency shift with Temp (MHz/°C) (optional)<200
Beam height from base plate (mm)27.4
Warm-up time (minutes)<10
Laser head consumption(W)15 (typical), <25 (40℃)
Max. Laser Head Base plate Temp (°C)50

What do you need?

Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare MSL-FN-335 with the closest available models in the CW Lasers family.

Selection parameterMSL-FN-335 (current)UV-FN-335-LNUV-DP-335-LN
Wavelength335 nm335 nm335 nm
Optical power / pulse energy1~10 mW1~10 mW10~500 mW
Operating mode / pulse widthCWCWCW
Beam quality<1.5<1.5Near TEM00