Power stability, linewidth, beam quality
MDL-III-514.5 is a 514.5 nm CW laser. High Stability Green Laser. Key specifications: output / average power 1~50 mW, operating mode CW, power stability (rms, 4 hours ± 3°c) <2%, <1%, <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
17 specification rows
| Output / average power | 1~50 mW |
|---|---|
| Beam / notes | High Stability Green Laser |
| Operating mode | CW |
| Power stability (rms, 4 hours ± 3°C) | <2%, <1%, <0.5% |
| Cooled method | Conduction |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM |
| Expected lifetime (hours) | >10000 |
| Central wavelength (nm) | 514.5±3 |
| Transverse mode | Near TEM00 |
| M² | <1.5 |
| Beam diameter at the aperture (1/e2, mm) | ~3.0 |
| Beam divergence, full angle (mrad) | <1.0 |
| Polarization ratio | >50:1, (>100:1 optional) Horizontal±5 degree (Vertical optional) |
| Warm-up time (minutes) | <5 |
| Beam height from base plate (mm) | 24.8 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
MDL-III-514.5: 514.5 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. The catalogued beam parameter (Near TEM00) helps predict how the source will focus and propagate through the instrument.
MDL-III-514.5: Laboratory measurement benefits from a stable, focusable source. 514.5 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (Near TEM00) informs waist size and propagation.
System integration
Use these checks to connect MDL-III-514.5 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Conduction · Operating temperature (°C): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: Near TEM00 · M²: <1.5. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MDL-III-514.5 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MDL-III-514.5 (current) | MXL-515 | FC-D-514.5 |
|---|---|---|---|
| Wavelength | 514.5 nm | 514.5 nm | 514.5 nm |
| Optical power / pulse energy | 1~50 mW | 1~500 mW | 1~20 mW |
| Operating mode / pulse width | CW | Confirm for this model | CW |
| Beam quality | Near TEM00 | Confirm for this model | Confirm for this model |
Compare the MDL-III-514.5 with nearby cw lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide