Collimation
MSL-R-522: Collimation benefits from a stable, focusable source. 522 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (TEM00) informs waist size and propagation.
Power stability, linewidth, beam quality
MSL-R-522 is a 522 nm CW laser. Used for collimation, laser medical treatment, flow cytometry, dna sequencing. Laser. Key specifications: output / average power 150~500 mW, operating mode CW, transverse mode TEM00. View specifications, datasheet and enquiry options from Precisometer.
Specifications
14 specification rows
| Wavelength | 522 nm |
|---|---|
| Output / average power | 150~500 mW |
| Beam / notes | Laser |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Longitudinal mode | Single |
| Spectral line width (nm) | <5MHz |
| Pointing stability over temperature (μrad/°C) | <8 |
| Warm-up time (minutes) | <15 |
| Cooled method (water cooled) | WCH-580 |
| Operating temperature (°C) | 20-30 |
| Power supply (100-240VAC) | PSU-W-FDA |
| Expected lifetime (hours) | >10000 |
| Pointing stability(μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Coherent length (m) | >50 |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
MSL-R-522: Collimation benefits from a stable, focusable source. 522 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (TEM00) informs waist size and propagation.
MSL-R-522: 522 nm emission determines compatible optics, coatings and detectors for Laser medical treatment. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
MSL-R-522: 522 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<8) helps keep measured intensity changes attributable to the sample rather than source drift.
MSL-R-522: 522 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<8) helps keep measured intensity changes attributable to the sample rather than source drift.
System integration
Use these checks to connect MSL-R-522 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method (water cooled): WCH-580 · Operating temperature (°C): 20-30. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: TEM00. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MSL-R-522 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MSL-R-522 (current) | MSL-FN-522 | TUN-518-522 |
|---|---|---|---|
| Wavelength | 522 nm | 522 nm | 522 nm |
| Optical power / pulse energy | 150~500 mW | 1~150 mW | 1~30 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | TEM00 | TEM00 | <1.0 |
Compare the MSL-R-522 with nearby cw lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide