Pulse energy, repetition rate, pulse width
EO-266-G266 nm deep-UV Q-switched pulsed laser
266 nmThe EO-266-G is a 266 nm nanosecond diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Q-switching stores energy in the gain medium while resonator losses are high, then lowers those losses to release a pulse. Pulse energy and repetition rate must be considered together, because changing the pulse spacing changes the average power for a fixed pulse energy. Pulses shorter than 9 ns deliver the energy in a brief interval; pulse energy and focused spot size determine the intensity at the sample.
Specifications
EO-266-G
15 specification rows
| Output / average power | 100~500 mW |
|---|---|
| Pulse energy | 4~100 uJ |
| Repetition rate | 1 Hz-25 kHz |
| Pulse width | <9 ns @1 kHz |
| Power stability (rms, 4 hours, ±3℃) | <5%, <3% |
| Pointing stability over temperature (urad/℃) | <20 |
| Beam divergence, full angle (mrad) | <3 |
| Beam diameter (mm) | ~1 |
| Warm-up time (minutes) | <15 |
| Cooled method | Air cooled or water cooled |
| Operating temperature (℃) | 15-30 |
| Power supply (24VDC) | PSU-EO-G (24V/13A) |
| Wavelength (nm) | 266±1 |
| Operating mode | Actively Q-switched |
| Beam height from base plate (mm) | 80, 56 |
What do you need?
Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare EO-266-G with the closest available models in the Pulsed Lasers family.
| Selection parameter | EO-266-G (current) | MPL-Q-266 | MPL-Q1-266 |
|---|---|---|---|
| Wavelength | 266 nm | 266 nm | 266 nm |
| Optical power / pulse energy | 100~500 mW | 1~30 mW | 10 mW |
| Operating mode / pulse width | Actively Q-switched | Passively Q-switched | Passively Q-switched |
| Beam quality | <3 | <2 | <2 |
Related pulsed lasers
Compare the EO-266-G with nearby pulsed lasers across the wavelength range.
