Power stability, linewidth, beam quality
UV-B-355 is a 355 nm CW laser. Used for flow cytometry, dna sequencing, optical instrument, medical imaging. Features: TEM 00. Key specifications: output / average power 100~1000 mW, spectral linewidth <0.04 nm, power stability <1%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
17 specification rows
| Output / average power | 100~1000 mW |
|---|---|
| Spectral linewidth | <0.04 nm |
| Power stability | <1% |
| Beam / notes | Features: TEM 00 |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <5 |
| M2 | <1.1 / <1.2 |
| Polarization ratio | >100:1 Horizontal |
| Warm-up time (minutes) | <10 |
| Cooled method | Water cooled |
| Operating Temperature (°C) | 10-35 |
| Operating voltage (VDC) | 24V/13A |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 355±1 |
| Beam diameter at the aperture (1/e2, mm) | <2.0 |
| Beam height from base plate (mm) | 90 |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
UV-B-355: 355 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
UV-B-355: 355 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
UV-B-355: 355 nm emission determines compatible optics, coatings and detectors for Optical instrument. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
UV-B-355: 355 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
System integration
Use these checks to connect UV-B-355 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Water cooled · Operating Temperature (°C): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: TEM00 · Beam divergence, full angle (mrad): <5. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare UV-B-355 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | UV-B-355 (current) | MSL-FN-3 55 | MSL-R-3 55 |
|---|---|---|---|
| Wavelength | 355 nm | 355 nm | 355 nm |
| Optical power / pulse energy | 100~1000 mW | 1~10 mW | 10~100 mW |
| Operating mode / pulse width | CW | Confirm for this model | Confirm for this model |
| Beam quality | TEM00 | Confirm for this model | Confirm for this model |
Compare the UV-B-355 with nearby cw lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide