Pulse energy, repetition rate, pulse width
LPS-1064-A1064 nm near-infrared Q-switched pulsed laser
1064 nmThe LPS-1064-A is a 1064 nm nanosecond lamp-pumped solid-state laser. The specified pulse energy is 50–200 mJ. Select energy, timing and cooling for the same configuration. A pump lamp supplies optical energy to a solid gain medium, and the resonator amplifies the laser light. Lamp excitation and thermal recovery are important when setting the repetition rate. Q-switching stores energy in the gain medium while resonator losses are high, then lowers those losses to release a pulse. Pulse energy and repetition rate must be considered together, because changing the pulse spacing changes the average power for a fixed pulse energy. Pulses shorter than 10 ns deliver the energy in a brief interval; pulse energy and focused spot size determine the intensity at the sample.
Specifications
LPS-1064-A
16 specification rows
| Wavelength (nm) | 1064 |
|---|---|
| Operating mode | Actively Q-switched |
| Pulse energy | 50–200 mJ |
| Repetition rate | 1–10 Hz; single shot optional |
| Pulse width | <10 ns |
| Cooling | Closed-loop liquid cooling |
| Jitter (ns, sdev) | <1ns (Int.) |
| Beam divergence, full angle (mrad) | ~2 / ~1 |
| Beam diameter (mm) | <6 |
| Warm-up time (minutes) | <15 |
| Operating temperature (℃) | 20-25 |
| Power supply (110/220VAC) | PSU-LPS-A(3U) |
| Expected lifetime of lamp (pulses) | 107-108 |
| Energy stability (std dev/mean) | <5%, <3%, <2% |
| Beam height from base plate (mm) | 123 |
| Available options | Accessories |
Select energy and timing together
Specify pulse energy, repetition rate, pulse duration, trigger requirements and cooling for the same configuration. The maximum energy and maximum repetition rate can describe different variants. Energy per pulse is quoted in μJ, mJ or J; pulse duration is quoted in ps, ns or ms.
Compare high-energy laser models →What do you need?
Tell us the pulse energy, pulse width, repetition rate, trigger and cooling requirements you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare LPS-1064-A with the closest available models in the Pulsed Lasers family.
| Selection parameter | LPS-1064-A (current) | FS-H-1064A | FS-H-1064B |
|---|---|---|---|
| Wavelength | 1064 nm | 1064 nm | 1064 nm |
| Optical power / pulse energy | 50–200 mJ | 1-500 mW | 500-5000 mW |
| Operating mode / pulse width | Actively Q-switched | Pulsed | Pulsed |
| Beam quality | ~2 / ~1 | <1.2 | <1.2 |
Related pulsed lasers
Compare the LPS-1064-A with nearby pulsed lasers across the wavelength range.
