Fiber output, PM options, seed formats
FL-560-SLM560 nm yellow single-frequency low-noise fiber laser
560 nmThe FL-560-SLM is a 560 nm continuous-wave fiber laser. A seed laser establishes the optical signal, and a fiber amplifier increases its power while guiding the light in active fiber. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.
Specifications
FL-560-SLM
30 specification rows
| Output / average power | 1-100 mW |
|---|---|
| Beam / notes | Laser |
| Operating mode | CW |
| Free space output power (mW) | 1-100 |
| Fiber coupled output power (mW) | 1-50 |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.3%, <0.1%, (<0.05% optional) |
| Frequency shift (MHz) (over ±2℃and 8hours ) | <±200 |
| M2 | <1.1 |
| Fiber connector | FC/APC |
| Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Polarization ratio (dB) | >15 Horizontal (Vertical optional) |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Operating temperature (℃) | 15-30 |
| Operating voltage (VAC) | 110/220V |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 560±1 |
| Power stability (rms, 4 hours ±3℃) | <2%, <1% |
| Current adjustment range | 1-100% |
| Spectral linewidth (kHz) | <200 |
| Temperature turning range(nm) | >0.2 |
| PZT Turning range (GHz) | >5 |
| PZT Turning bandwidth (kHz) | >5 |
| M² | <1.1 |
| Numerical aperture | 0.12NA |
| Beam diameter (mm) | ~1@free space output |
| Pointing stability (urad) | <50 |
What do you need?
Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FL-560-SLM with the closest available models in the Fiber Lasers family.
| Selection parameter | FL-560-SLM (current) | FL-560-LN-L | 560 |
|---|---|---|---|
| Wavelength | 560 nm | 560 nm | 560 nm |
| Optical power / pulse energy | 1-100 mW | 1~100 mW | 1~100 mW |
| Operating mode / pulse width | CW | CW | — |
| Beam quality | <1.1 | <1.1 | <1.1 |
Related fiber lasers
Compare the FL-560-SLM with nearby fiber lasers across the wavelength range.
