Back to Home

Fiber output, PM options, seed formats

FL-550-SLM550 nm green narrow-linewidth single-frequency fiber laser

550 nm

The FL-550-SLM is a 550 nm continuous-wave fiber laser. A seed laser establishes the optical signal, and a fiber amplifier increases its power while guiding the light in active fiber. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.

Specifications

FL-550-SLM

29 specification rows

Output / average power1~500 mW
Spectral linewidth<20 kHz
M²<1.1
Operating modeCW
Free space output power (mW)1-500
Fiber coupled output power (mW)1-250
Transverse modeTEM00
Longitudinal modeSLM
Current adjustment range1-100%
Frequency shift (MHz) (over ±2℃and 8hours )<±200
Fiber connectorFC/APC
Fiber length(m)1
Fiber jacketPVC, Metal optional
Polarization ratio (dB)>15 Horizontal (Vertical optional)
Warm-up time (minutes)<30
Cooled methodAir cooled or Water cooled
Operating temperature (℃)15-30
Operating voltage (VAC)110/220V
Expected lifetime (hours)>10000
Beam / notesLaser
Relative intensity noise (rms, 10Hz-3MHz)<0.3%, <0.1%, (<0.05% optional)
Wavelength (nm)550±1
Power stability (rms, 4 hours ±3℃)<2%, <1%
Temperature turning range(nm)>0.2
PZT Turning range (GHz)>5
PZT Turning bandwidth (kHz)>5
Numerical aperture0.12NA
Beam diameter (mm)~1@free space output
Pointing stability (urad)<50

What do you need?

Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare FL-550-SLM with the closest available models in the Fiber Lasers family.

Selection parameterFL-550-SLM (current)MLL-U-550MLL-FN-550
Wavelength550 nm550 nm550 nm
Optical power / pulse energy1~500 mW1~100 mW100~500 mW
Operating mode / pulse widthCWCWCW
Beam quality<1.1<1.2<1.2