Back to Home

Pulse energy, repetition rate, pulse width

DPS-355-Pico355 nm UV pulsed laser

355 nm

The DPS-355-Pico is a 355 nm picosecond diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Q-switching stores energy in the gain medium while resonator losses are high, then lowers those losses to release a pulse. Pulse energy and repetition rate must be considered together, because changing the pulse spacing changes the average power for a fixed pulse energy. At the nominal 5 MHz repetition rate, pulses shorter than 50 ps arrive about 200 ns apart.

Specifications

DPS-355-Pico

17 specification rows

Output / average power100~700 mW
Pulse energy20-140 nJ
Repetition rate5 MHz
Pulse width<50 ps
Operating modePulsed
Power stability (rms, 4 hours, ±3℃)<5%, <3%
Beam divergence, full angle (mrad)<3
of short pulse duration, high repetition rateBeam diameter (mm) / ~2
Cooled methodAir cooled
Warm-up time (minutes)<15
Operating temperature (℃)15-30
Power supply (110/220VAC)PSU-DPS-Pico
Expected lifetime (hours)>10000
Wavelength (nm)355±1
Beam diameter (mm)~2
Rep. rate5MHz
Beam height from base plate (mm)128

What do you need?

Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare DPS-355-Pico with the closest available models in the Pulsed Lasers family.

Selection parameterDPS-355-Pico (current)MPL-FN-355MPL-F-355
Wavelength355 nm355 nm355 nm
Optical power / pulse energy100~700 mW1~30 mW1~100 mW
Operating mode / pulse widthPulsedPassively Q-switchedPassively Q-switched
Beam quality<3<2.0<2