Back to Home

Pulse energy, repetition rate, pulse width

EO-S-1064-RS 1064 nm near-infrared Q-switched pulsed laser

1064 nm
  • EO-S-1064-RS is a 1064 nm actively electro-optic Q-switched DPSS laser for synchronized measurements.
  • Pulse energy: Up to 1 kHz: 1–300 μJ; 300 μJ at 1 kHz | Up to 20 kHz: 1–100 μJ; 100 μJ at 1 kHz, 75 μJ at 20 kHz | Up to 100 kHz: 1–100 μJ; 100 μJ at 1 kHz, 60 μJ at 20 kHz, 25 μJ at 50 kHz, 10 μJ at 100 kHz
  • Output / average power: Up to 1 kHz: 1–300 mW | Up to 20 kHz: 1–1500 mW | Up to 100 kHz: 1–1500 mW
  • Pulse width: Up to 1 kHz: ~1.8 ns | Up to 20 kHz: ~1.6 ns at 1 kHz; ~2.0 ns at 20 kHz | Up to 100 kHz: ~1.3 ns at 1 kHz; ~3 ns at 20 kHz; ~5 ns at 50 kHz; ~8 ns at 100 kHz
  • Repetition rate: 1 Hz–100 kHz, depending on configuration
  • Operating mode: Actively electro-optic Q-switched
  • Timing jitter (external trigger, standard deviation): <2 ns standard; <0.2 ns optional

Specifications

EO-S-1064-RS

21 specification rows

Wavelength (nm)1064 ±1
Operating modeActively electro-optic Q-switched
Output / average powerUp to 1 kHz: 1–300 mW | Up to 20 kHz: 1–1500 mW | Up to 100 kHz: 1–1500 mW
Pulse energyUp to 1 kHz: 1–300 μJ; 300 μJ at 1 kHz | Up to 20 kHz: 1–100 μJ; 100 μJ at 1 kHz, 75 μJ at 20 kHz | Up to 100 kHz: 1–100 μJ; 100 μJ at 1 kHz, 60 μJ at 20 kHz, 25 μJ at 50 kHz, 10 μJ at 100 kHz
Repetition rate1 Hz–100 kHz, depending on configuration
Pulse widthUp to 1 kHz: ~1.8 ns | Up to 20 kHz: ~1.6 ns at 1 kHz; ~2.0 ns at 20 kHz | Up to 100 kHz: ~1.3 ns at 1 kHz; ~3 ns at 20 kHz; ~5 ns at 50 kHz; ~8 ns at 100 kHz
Peak powerUp to 1 kHz: 0.5–160 kW | Up to 20 kHz: 0.5–60 kW | Up to 100 kHz: 0.1–76.9 kW
Timing jitter (external trigger, standard deviation)<2 ns standard; <0.2 ns optional
Power stability (rms, 4 h, ±3 °C)<5% / <3% / <2% / <1% options
Transverse modeTEM00
M²<1.5
Beam diameter at the aperture (1/e²)~1.0 mm
Beam divergence, full angle<1.5 mrad
Warm-up time<10 minutes
Beam height from base plate73 mm
Operating temperature10–35 °C
Power supplyPSU-EOM-DL; PSU-EOM-L optional for low-jitter operation.
AC input (configuration-dependent)90–264 VAC in the 532/1064 nm range specification; 100–240 VAC in the series datasheet. Confirm the input rating of the supplied power supply.
Expected lifetime>10000 hours
ApplicationsLaser ranging; lidar; Raman spectroscopy; ICP-MS; LIBS; scientific research.
Configuration notesPulse duration is not tunable; it varies with energy and repetition rate. Maximum power, pulse energy and frequency are not simultaneous guarantees.
EO-S-1064-RS configurations · choose energy and repetition rate together
Model / wavelengthRepetition rateAverage powerPulse energyPulse durationPeak power
EO-S-1064-RS1064 nm1 Hz–1 kHz1–300 mW1–300 μJ; 300 μJ at 1 kHz~1.8 ns0.5–160 kW
EO-S-1064-RS1064 nm1–20 kHz1–1500 mW1–100 μJ; 100 μJ at 1 kHz, 75 μJ at 20 kHz~1.6 ns at 1 kHz; ~2.0 ns at 20 kHz0.5–60 kW
EO-S-1064-RS1064 nm1–100 kHz1–1500 mW1–100 μJ; 100 μJ at 1 kHz, 60 μJ at 20 kHz, 25 μJ at 50 kHz, 10 μJ at 100 kHz~1.3 ns at 1 kHz; ~3 ns at 20 kHz; ~5 ns at 50 kHz; ~8 ns at 100 kHz0.1–76.9 kW

What do you need?

  • Wavelength
  • Pulse energy at required repetition rate
  • Pulse duration
  • External-trigger jitter and fixed delay
  • Detector/camera timing
  • Beam delivery and power supply

Model selection

Nearby series comparison

Compare EO-S-1064-RS with the closest available models in the Pulsed Lasers family.

Selection parameterEO-S-1064-RS (current)FS-H-1064AFS-H-1064B
Wavelength1064 nm1064 nm1064 nm
Optical power / pulse energyUp to 1 kHz: 1–300 mW | Up to 20 kHz: 1–1500 mW | Up to 100 kHz: 1–1500 mW1-500 mW500-5000 mW
Operating mode / pulse widthActively electro-optic Q-switchedPulsedPulsed
Beam quality<1.5<1.2<1.2