Power stability, linewidth, beam quality
MLL-FN-543543 nm green CW laser
543 nmThe MLL-FN-543 is a 543 nm continuous-wave diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Continuous-wave operation provides a sustained beam for experiments that need steady illumination.
Specifications
MLL-FN-543
20 specification rows
| Output / average power | 1~200 mW |
|---|---|
| Beam / notes | Linewidth<0.003 nm |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1.5 |
| Warm-up time (minutes) | <5 |
| Pointing stability over temperature (urad/°C) | <8 |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA |
| Operating voltage (VDC) | PSU-SR-OEM (12V/25A) |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 543±1 |
| Power stability (rms, 4 hours ±3°C) | <3%, <2%, <1% |
| Spectral line width (nm) | <0.1, <0.003 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1% |
| M² | <1.2 |
| Beam diameter at the aperture (1/e2, mm) | <1.5 |
| Polarization ratio | >100:1, Vertical (Horizontal optional) |
| Pointing stability (urad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 27.4 |
What do you need?
Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MLL-FN-543 with the closest available models in the CW Lasers family.
| Selection parameter | MLL-FN-543 (current) | MSL-FN-543 | MGL-U-543 |
|---|---|---|---|
| Wavelength | 543 nm | 543 nm | 543 nm |
| Optical power / pulse energy | 1~200 mW | 1~200 mW | 1~200 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | <1.2 | <1.2 | <1.2 |
Related cw lasers
Compare the MLL-FN-543 with nearby cw lasers across the wavelength range.
