Communication
PGL-FP-1310: 1310 nm emission must sit inside the fiber-component passband used for Communication; connector polish, fiber mode, linewidth and back-reflection tolerance should be specified as one optical interface.
Power stability, linewidth, beam quality
PGL-FP-13101310 nm infrared CW laser
1310 nmPGL-FP-1310 is a 1310 nm CW laser. Used for communication, spectrum analysis, measurement, flow cytometry. SM Fiber coupled. Key specifications: output / average power 1~15 mW. View specifications, datasheet and enquiry options from Precisometer.
Specifications
PGL-FP-1310
2 specification rows
| Wavelength | 1310 nm |
|---|---|
| Output / average power | 1~15 mW |
| Beam / notes | SM Fiber coupled |
Series-level technical context
Engineering context for a thin CW Lasers record
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 19 nearby configurations on the same source-product record; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
Typical operating fields in the series
- • Output / average power: 1~2500 mW
- • Output / average power: 1~5 W
- • Output / average power: 1~200 mW
- • Operating mode: CW
- • Power stability (rms, 4 hours ± 3°C): <2%, <1%, <0.5%
Beam-quality tolerance context
Nearby series records state M²: <1.1, Beam divergence, full angle (mrad): <3.0, Beam divergence, full angle (mrad): <1.5, and Beam divergence, full angle (mrad): <2.0. These are series context, not guaranteed values for PGL-FP-1310; confirm them on the order-specific datasheet.
Optical integration schematic
- Step 1Laser source and internal thermal control
- Step 2Configured fiber launch or integrated pigtail
- Step 3Mode- and connector-matched patch lead
- Step 4Collimator, isolator or experiment input
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Spectrum analysis
PGL-FP-1310: 1310 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line.
Measurement
PGL-FP-1310: Measurement benefits from a stable, focusable source. 1310 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
Flow cytometry
PGL-FP-1310: 1310 nm emission can be matched to the absorption or excitation band used in Flow cytometry. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare PGL-FP-1310 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | PGL-FP-1310 (current) | MDL-1310(FC) | FC-1310 |
|---|---|---|---|
| Wavelength | 1310 nm | 1310 nm | 1310 nm |
| Optical power / pulse energy | 1~15 mW | 1~2500 mW | 1~5 W |
| Operating mode / pulse width | Confirm for this model | CW | Confirm for this model |
| Beam quality | Confirm for this model | Multimode | Confirm for this model |
Related cw lasers
Compare the PGL-FP-1310 with nearby cw lasers across the wavelength range.
