Pulse energy, repetition rate, pulse width
MPL-F-351351 nm UV Q-switched pulsed laser
351 nmThe MPL-F-351 is a 351 nm nanosecond diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Q-switching stores energy in the gain medium while resonator losses are high, then lowers those losses to release a pulse. Pulse energy and repetition rate must be considered together, because changing the pulse spacing changes the average power for a fixed pulse energy. At the nominal 1 kHz repetition rate, pulses lasting approximately 4 ns arrive about 1 ms apart.
Specifications
MPL-F-351
20 specification rows
| Operating mode | Passively Q-switched |
|---|---|
| Output / average power | 1~10 mW |
| Pulse energy | 0.1~4 uJ |
| Beam / notes | Passively Q-switched UV Laser |
| Power stability (rms, 4 hours, ±3°C) | <5%, <3%, <2% |
| Transverse mode | TEM00 |
| Beam diameter at the aperture (mm) | ~1.2 |
| Warm-up time (minutes) | <5 |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA/PSU-H-LED |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 351±1 |
| Single pulse energy (µJ) | 0.1-4 |
| Pulse duration (ns) | ~4 |
| Peak power (kW) | 0.1-1 |
| Rep. rate (kHz) | 1 |
| M² | <2 |
| Beam divergence, full angle (mrad) | <1.5 |
| Polarization ratio | >50:1, Horizontal (Vertical optional) |
| Beam height from base plate (mm) | 45 |
What do you need?
Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MPL-F-351 with the closest available models in the Pulsed Lasers family.
Related pulsed lasers
Compare the MPL-F-351 with nearby pulsed lasers across the wavelength range.
