Pulse energy, repetition rate, pulse width
MIL-PS-3810 is a 3800 nm Pulsed laser. Used for material processing especially for plastics, fso communication, security applications. Picosecond Pulsed Mid-Infrared Laser. Key specifications: output / average power 1~600 mW, wavelength (nm) 3800±30, operating mode CW. View specifications, datasheet and enquiry options from Precisometer.
Specifications
11 specification rows
| Output / average power | 1~600 mW |
|---|---|
| Beam / notes | Picosecond Pulsed Mid-Infrared Laser |
| Wavelength (nm) | 3800±30 |
| Operating mode | CW |
| Power stability (rms, 4 hours±3℃) | <5%, <3%, (<1% optional@2.8W) |
| Beam height from base plate (mm) | 103 |
| Warm-up time (minutes) | <10 |
| Cooled method | Air Cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
Application context
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
MIL-PS-3810: Material processing especially for plastics depends on how optical energy is delivered to the target; 3800 nm emission governs absorption, while pulse energy, duration and repetition rate governs peak intensity and heat deposition.
MIL-PS-3810: 3800 nm emission must sit inside the fiber-component passband used for FSO communication; connector polish, fiber mode, linewidth and back-reflection tolerance should be specified as one optical interface.
MIL-PS-3810: 3800 nm emission determines compatible optics, coatings and detectors for Security applications. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
System integration
Use these checks to connect MIL-PS-3810 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Air Cooled · Operating temperature (℃): 15-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MIL-PS-3810 with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MIL-PS-3810 (current) | EO-XS-2600-4410 | EO-XS-2600-4410 |
|---|---|---|---|
| Wavelength | 3800 nm | 3800 nm | 3700 nm |
| Optical power / pulse energy | 1~600 mW | 1~1000 mW | 1~1000 mW |
| Operating mode / pulse width | CW | Q-switched | Q-switched |
| Beam quality | Confirm for this model | <5 | <5 |
Compare the MIL-PS-3810 with nearby pulsed lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Photoacoustic imagingConnect optical absorption to wavelength, pulse fluence, stress confinement, acoustic bandwidth, repetition rate, and synchronization at the sample.
Open guide
Ultrafast spectroscopyDesign the pump, probe, delay line, monochromator, visible or SWIR camera, synchronization, and transient-signal budget as one experiment.
Open guide