Back to Home

Pulse energy, repetition rate, pulse width

FS-F-515B515 nm green pulsed laser

515 nm

The FS-F-515B is a 515 nm femtosecond fiber laser. Pump energy is supplied to an active fiber, which guides the light and provides optical gain as it propagates. Output coupling then delivers the amplified beam to the experiment. Pulse duration sets how briefly the energy is delivered, while repetition rate sets the interval between pulses; average power alone does not describe the peak intensity at the sample. Pulses shorter than 300 fs deliver the energy in a brief interval; pulse energy and focused spot size determine the intensity at the sample. The quoted power range represents factory-set configurations; specify the required output rating when ordering.

Specifications

FS-F-515B

24 specification rows

Operating modePulsed
Output / average power2-8 W
Repetition rate100 kHz-1 MHz
Pulse duration (fs)<300
FiberFemtosecond / pulsed / laser / at
Ave power stability (rms, 4 hours±3℃)<2%, <1%
Warm-up time (minutes)<10
Transverse modeTEM00
M2 factor<1.2
Polarization ratio>100:1 Horizontal
Cooled methodWater cooled
Operating temperature (℃)10-35
Power supply (100-240VAC)RAD1PS
Expected lifetime (hours)>10000
Beam / notes<300 fs @100 kHz-1 MHz
Pulse width<300 @ 1MHz
Wavelength (nm)515±5
Single pulse energy (uJ)2-8 (8uJ@1MHz)
Rep. rate (kHz)100-1000
Peak power (MW)6.7-26 (26MW@1MHz)
Beam divergence, full angle (mrad)<1.0
Beam diameter at the aperture (1/e2,mm)<2
M²<1.2
Beam height from base plate (mm)118

What do you need?

Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare FS-F-515B with the closest available models in the Pulsed Lasers family.

Selection parameterFS-F-515B (current)FS-H-515AFS-H-515B
Wavelength515 nm515 nm515 nm
Optical power / pulse energy2-8 W1~100 mW100~1000 mW
Operating mode / pulse widthPulsedPulsedPulsed
Beam quality<1.2<1.2<1.2