Pulse energy, repetition rate, pulse width
PS-FG-1030A1030 nm near-infrared pulsed laser
1030 nmThe PS-FG-1030A is a 1030 nm picosecond laser source. Pulse duration sets how briefly the energy is delivered, while repetition rate sets the interval between pulses; average power alone does not describe the peak intensity at the sample. The quoted power range represents factory-set configurations; specify the required output rating when ordering.
Specifications
PS-FG-1030A
22 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 1~5 W |
| Beam / notes | Picosecond Pulsed Infrared Laser |
| Single pulse energy (uJ) | 1-10 |
| pulse | duration, / high |
| Ave power stability (rms, 4 hours±3℃) | <5%, <3% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1.5 |
| M2 | <1.3 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Water cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1030±1 |
| Rep. rate (kHz) | 500-1000 |
| Pulse duration (ps) | 10±1 |
| Peak power (MW) | 0.5-1 |
| Beam diameter at the aperture (1/e2,mm) | <2 |
| M² | <1.3 |
| Beam height from base plate (mm) | 122 |
What do you need?
Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare PS-FG-1030A with the closest available models in the Pulsed Lasers family.
| Selection parameter | PS-FG-1030A (current) | FS-H-1030A | FS-H-1030B |
|---|---|---|---|
| Wavelength | 1030 nm | 1030 nm | 1030 nm |
| Optical power / pulse energy | 1~5 W | 1~500 mW | 500~3000 mW |
| Operating mode / pulse width | Pulsed | Pulsed | Pulsed |
| Beam quality | <1.3 | <1.2 | <1.2 |
Related pulsed lasers
Compare the PS-FG-1030A with nearby pulsed lasers across the wavelength range.
