Power stability, linewidth, beam quality
MRL-FN-607-SM is a 607 nm CW laser. Used for scientific experiments, collimation, laser medical treatment, scientific experiment. Laser. Key specifications: output / average power 1~1000 mW, operating mode CW, power stability (rms, 4 hours±3℃) <3%, <2%, <1%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
16 specification rows
| Wavelength | 607 nm |
|---|---|
| Output / average power | 1~1000 mW |
| Beam / notes | Laser |
| Operating mode | CW |
| Power stability (rms, 4 hours±3℃) | <3%, <2%, <1% |
| Transverse mode | TEM00 |
| M2 | <1.2 |
| Fiber connector | FC/APC |
| Fiber jacket | PVC |
| Fiber length | 1m |
| Warm-up time (minutes) | <10 |
| Operating Temperature (°C) | 10-35 |
| Modulation option | DC-1kHz; TTL and Analog optional |
| Power supply (100-240VAC) | PSU-H-FDA/ PSU-H-LED/ PSU-SR |
| Expected lifetime (hours) | >10000 |
| M² | <1.2 |
| Polarizaiton (optional) | >50:1 after PM fiber |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
MRL-FN-607-SM: 607 nm emission determines compatible optics, coatings and detectors for Scientific experiments. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
MRL-FN-607-SM: Collimation benefits from a stable, focusable source. 607 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (TEM00) informs waist size and propagation.
MRL-FN-607-SM: 607 nm emission determines compatible optics, coatings and detectors for Laser medical treatment. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
MRL-FN-607-SM: 607 nm emission determines compatible optics, coatings and detectors for Scientific experiment. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
System integration
Use these checks to connect MRL-FN-607-SM to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber connector: FC/APC. Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
Operating Temperature (°C): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: TEM00 · M2: <1.2. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MRL-FN-607-SM with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MRL-FN-607-SM (current) | MSL-FN-607 | MSL-R-607 |
|---|---|---|---|
| Wavelength | 607 nm | 607 nm | 607 nm |
| Optical power / pulse energy | 1~1000 mW | 1~200 mW | 200~1000 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | TEM00 | TEM00 | TEM00 |
Compare the MRL-FN-607-SM with nearby cw lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide