SLM, narrow linewidth, coherence
MSL-U-1053-SU is a 1053 nm Single-Frequency laser. Used for dna sequencing, flow cytometry, cell sorting, optical instruments. M²: <1.2. Key specifications: output / average power 1~200 mW, spectral linewidth <1 MHz, optical noise <2%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
22 specification rows
| Wavelength | 1053 nm |
|---|---|
| Output / average power | 1~200 mW |
| Spectral linewidth | <1 MHz |
| Optical noise | <2% |
| M² | <1.2 |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Longitudinal mode | Single |
| Beam diameter at the aperture (1/e2, mm) | <1.0 |
| Beam divergence (mrad) | <1.5 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Warm-up time (minutes) | <5 |
| Pointing stability over temperature (urad/°C) | <8 |
| Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | <±200 |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA |
| Operating voltage (VDC) | PSU-SR-OEM (12V/25A) |
| Expected lifetime (hours) | >10000 |
| Pointing stability (urad) (over 2 hours after warm-up and ±3°C) | <50 |
| Frequency shift with temp (MHz/°C) (optional) | <200 |
| Coherent length (m) | >50 |
| Beam height from base plate (mm) | 27.4 |
| Laser head consumption (W) | 15 (typical), <25 (40°C) |
Application context
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
MSL-U-1053-SU: 1053 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<2%) helps keep measured intensity changes attributable to the sample rather than source drift.
MSL-U-1053-SU: 1053 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<2%) helps keep measured intensity changes attributable to the sample rather than source drift.
MSL-U-1053-SU: 1053 nm emission determines compatible optics, coatings and detectors for Cell sorting. The catalogued beam parameter (<1.2) helps predict how the source will focus and propagate through the instrument.
MSL-U-1053-SU: 1053 nm emission determines compatible optics, coatings and detectors for Optical instruments. The catalogued beam parameter (<1.2) helps predict how the source will focus and propagate through the instrument.
System integration
Use these checks to connect MSL-U-1053-SU to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Operating temperature (°C): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
M²: <1.2 · Transverse mode: TEM00. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MSL-U-1053-SU with the closest available models in the Single-Frequency Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MSL-U-1053-SU (current) | 1053 | MSL-III-1053L |
|---|---|---|---|
| Wavelength | 1053 nm | 1053 nm | 1053 nm |
| Optical power / pulse energy | 1~200 mW | 1~120 mW | 1~120 mW |
| Operating mode / pulse width | CW | Pulsed | CW |
| Beam quality | <1.2 | <1.5 | <1.5 |
Compare the MSL-U-1053-SU with nearby single-frequency lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide