Scientific research
AO-S-263-H/1-15uJ: 263 nm emission determines compatible optics, coatings and detectors for Scientific research. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Pulse energy, repetition rate, pulse width
AO-S-263-H/1-15uJ263 nm deep-UV Q-switched pulsed laser
263 nmAO-S-263-H/1-15uJ is a 263 nm Pulsed laser. Used for scientific research, icp-ms, laser processing, measure. Actively Q-switched UV Laser. Key specifications: operating mode Q-switched, output / average power 1-15 mW. View specifications, datasheet and enquiry options from Precisometer.
Specifications
AO-S-263-H/1-15uJ
3 specification rows
| Wavelength | 263 nm |
|---|---|
| Operating mode | Q-switched |
| Output / average power | 1-15 mW |
| Beam / notes | Actively Q-switched UV Laser |
Series-level technical context
Engineering context for a thin Pulsed Lasers record
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 12 wavelength-near pulsed lasers records; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
Typical operating fields in the series
- • Output / average power: 1-200 mW
- • Output / average power: 1-250 mW
- • Output / average power: 1~15 mW
- • Operating mode: Q-switched
- • Repetition rate: 1 Hz-1 kHz
Beam-quality tolerance context
Nearby series records state M²: <2, M²: <2.0, M²: <1.2, and Beam divergence, full angle (mrad): <1.5. These are series context, not guaranteed values for AO-S-263-H/1-15uJ; confirm them on the order-specific datasheet.
Optical integration schematic
- Step 1Pump and pulsed laser head
- Step 2Safety shutter and optional isolator
- Step 3Beam-expansion or focusing optics
- Step 4Sample with synchronized trigger or detector
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
ICP-MS
AO-S-263-H/1-15uJ: 263 nm emission determines compatible optics, coatings and detectors for ICP-MS. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Laser processing
AO-S-263-H/1-15uJ: Laser processing depends on how optical energy is delivered to the target; 263 nm emission governs absorption, while pulse energy, duration and repetition rate governs peak intensity and heat deposition.
Measure
AO-S-263-H/1-15uJ: Measure benefits from a stable, focusable source. 263 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare AO-S-263-H/1-15uJ with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | AO-S-263-H/1-15uJ (current) | AO-U-263/1-60uJ | AO-S-261-H |
|---|---|---|---|
| Wavelength | 263 nm | 263 nm | 261 nm |
| Optical power / pulse energy | 1-15 mW | 1-200 mW | 1~15 mW |
| Operating mode / pulse width | Q-switched | Q-switched | 1 Hz-1 kHz |
| Beam quality | Confirm for this model | Confirm for this model | Near TEM00 |
Related pulsed lasers
Compare the AO-S-263-H/1-15uJ with nearby pulsed lasers across the wavelength range.
