Optical instrumentation
FC-530: 530 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Power stability, linewidth, beam quality
FC-530530 nm green CW laser
530 nmFC-530 is a 530 nm CW laser. Key specifications: output / average power 1~45 mW, operating mode CW, power stability (rms, over 4 hours) <1%, <2%, <3%, <5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FC-530
16 specification rows
| Output / average power | 1~45 mW |
|---|---|
| Operating mode | CW |
| Power stability (rms, over 4 hours) | <1%, <2%, <3%, <5% |
| Fiber NA | 0.22 |
| Fiber Connector | SMA905 |
| Fiber Length (m) | 1 (Other lengths are available on request) |
| Warm-up time (minutes) | <5 |
| Operating temperature (℃) | 10~35 |
| Cooling way | By air |
| Expected lifetime (hours) | 10000 |
| Warranty | 1 year |
| Wavelength (nm) | 530±1 |
| Output power after fiber (mW) | >1,10, 20 …, 45 |
| Fiber Core Diameter (μm) | 400/ 200 (MM fiber, other fiber core diameter are available on request) |
| Input power | 100-240VAC |
| Modulation optional | TTL on/off, 1Hz- 1kHz, 1kHz- 10kHz, 10kHz-30kHz; and Analog modulation optional. |
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Laboratory measurement
FC-530: Laboratory measurement benefits from a stable, focusable source. 530 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
System integration
Integration and compatibility
Use these checks to connect FC-530 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Fiber delivery interface
- Fiber NA: 0.22 · Fiber Connector: SMA905
- Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
- Thermal management
- Operating temperature (℃): 10~35 · Cooling way: By air
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Technical FAQ
Integration questions for FC-530
How is the FC-530 output delivered?
Fiber NA: 0.22 · Fiber Connector: SMA905. Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
What cooling does the FC-530 require?
Operating temperature (℃): 10~35 · Cooling way: By air. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FC-530 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | FC-530 (current) | MGL-S-530-D | HPL-532-PA |
|---|---|---|---|
| Wavelength | 530 nm | 530 nm | 532 nm |
| Optical power / pulse energy | 1~45 mW | 1~50 mW | 1~10 W |
| Operating mode / pulse width | CW | Confirm for this model | Q-switched |
| Beam quality | Confirm for this model | Confirm for this model | <1 |
Related cw lasers
Compare the FC-530 with nearby cw lasers across the wavelength range.
