Power stability, linewidth, beam quality
MLL-S-1064 1064 nm near-infrared CW laser
1064 nm- The MLL-S-1064 is a 1064 nm continuous-wave diode-pumped solid-state laser.
- Output / average power: 1~1500 mW
- Spectral linewidth: <0.1 nm
- Operating mode: CW
Specifications
MLL-S-1064
24 specification rows
| Output / average power | 1~1500 mW |
|---|---|
| Spectral linewidth | <0.1 nm |
| Power stability | <2%, <1%, <0.5%, <3% |
| Beam / notes | Good seal IP67; M² factor: <1.2; Spectral line width (nm): <0.1 |
| Operating mode | CW |
| Transverse mode | TEM00 |
| M2 | <1.2 |
| Beam diameter at the aperture (1/e2, mm) | <1.0 |
| Beam divergence (mrad) | <1.5 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Warm-up time (minutes) | <5 |
| Pointing stability over temperature (μrad/°C) | <8 |
| Shock tolerance (6ms) | 7g laterally, 15g vertically |
| Operating temperature (℃) | 10-35 |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1064±1 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1%, (<0.5% optional) |
| M² | <1.2 |
| Pointing stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 19 |
| Power consumption (W) | <40 |
| Max. heat dissipation of head (W) | 4W@25℃ |
| IP rating | IP65 |
| Power supply (100-240VAC) | PSU-A-F |
What do you need?
- Output power
- Beam quality (M²)
- Beam delivery (free-space or fibre)
Model selection
Nearby series comparison
Compare MLL-S-1064 with the closest available models in the CW Lasers family.
| Selection parameter | MLL-S-1064 (current) | HPL-1064-CW | TEM-LN-1064 |
|---|---|---|---|
| Wavelength | 1064 nm | 1064 nm | 1064 nm |
| Optical power / pulse energy | 1~1500 mW | 50-100 W | 1~500 mW |
| Operating mode / pulse width | CW | CW | — |
| Beam quality | <1.2 | <8 | — |
Related cw lasers
Compare the MLL-S-1064 with nearby cw lasers across the wavelength range.


