Pulse energy, repetition rate, pulse width
DPS-355-Q355 nm UV Q-switched pulsed laser
355 nmThe DPS-355-Q is a 355 nm nanosecond diode-pumped solid-state laser. The specified pulse energy is 1–10 mJ. Select energy, timing and cooling for the same configuration. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Q-switching stores energy in the gain medium while resonator losses are high, then lowers those losses to release a pulse. Pulse energy and repetition rate must be considered together, because changing the pulse spacing changes the average power for a fixed pulse energy. Pulses shorter than 10 ns deliver the energy in a brief interval; pulse energy and focused spot size determine the intensity at the sample.
Specifications
DPS-355-Q
16 specification rows
| Wavelength (nm) | 355 |
|---|---|
| Operating mode | Actively Q-switched |
| Pulse energy | 1–10 mJ |
| Repetition rate | 1–100 Hz |
| Pulse width | <10 ns |
| Cooling | Water cooled |
| Jitter (ns, sdev) | <1ns (Int.) |
| High energy diode pumped all solid state | 1 |
| Energy stability (std dev/mean) | <5%, <3% |
| Beam divergence, full angle (mrad) | <3 |
| Beam diameter (mm) | ~2 / ~2.5 / ~3 |
| Warm-up time (minutes) | <15 |
| Operating temperature (℃) | 15-30 |
| Power supply (110/220VAC) | PSU-DPS-Q |
| Expected lifetime (pulses) | 109 |
| Beam height from base plate (mm) | 55 |
Select energy and timing together
Specify pulse energy, repetition rate, pulse duration, trigger requirements and cooling for the same configuration. The maximum energy and maximum repetition rate can describe different variants. Energy per pulse is quoted in μJ, mJ or J; pulse duration is quoted in ps, ns or ms.
Compare high-energy laser models →What do you need?
Tell us the pulse energy, pulse width, repetition rate, trigger and cooling requirements you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare DPS-355-Q with the closest available models in the Pulsed Lasers family.
| Selection parameter | DPS-355-Q (current) | MPL-FN-355 | MPL-F-355 |
|---|---|---|---|
| Wavelength | 355 nm | 355 nm | 355 nm |
| Optical power / pulse energy | 1–10 mJ | 1~30 mW | 1~100 mW |
| Operating mode / pulse width | Actively Q-switched | Passively Q-switched | Passively Q-switched |
| Beam quality | <3 | <2.0 | <2 |
Related pulsed lasers
Compare the DPS-355-Q with nearby pulsed lasers across the wavelength range.
