Back to Home

Pulse energy, repetition rate, pulse width

DPS-266-Pico266 nm deep-UV pulsed laser

266 nm

The DPS-266-Pico is a 266 nm picosecond diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Q-switching stores energy in the gain medium while resonator losses are high, then lowers those losses to release a pulse. Pulse energy and repetition rate must be considered together, because changing the pulse spacing changes the average power for a fixed pulse energy. At the nominal 5 MHz repetition rate, successive pulses arrive about 200 ns apart.

Specifications

DPS-266-Pico

17 specification rows

Output / average power100~500 mW
Pulse energy10~100 nJ
Repetition rate5 MHz
Pulse width<50 ps, 50-900
Operating modePulsed
Power stability (rms, 4 hours, ±3℃)<5%, <3%
energydiode / pumped / all / solid
Beam divergence, full angle (mrad)<3
Cooled methodAir cooled
Warm-up time (minutes)<15
Operating temperature (℃)15-30
Power supply (110/220VAC)PSU-DPS-Pico
Expected lifetime (hours)>10000
Wavelength (nm)266±1
Beam diameter (mm)~2
Rep. rate5MHz
Beam height from base plate (mm)128

What do you need?

Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare DPS-266-Pico with the closest available models in the Pulsed Lasers family.

Selection parameterDPS-266-Pico (current)MPL-Q-266MPL-Q1-266
Wavelength266 nm266 nm266 nm
Optical power / pulse energy100~500 mW1~30 mW10 mW
Operating mode / pulse widthPulsedPassively Q-switchedPassively Q-switched
Beam quality<3<2<2