Fiber output, PM options, seed formats
PGL-V-H-1320 is a 1320 nm Fiber laser. Used for medical imaging, flow cytometry, dna sequencing, measurement. Fiber output OEM Infrared Laser. Key specifications: output / average power 1~1000 mW, operating mode CW, power stability(rms, over 4 hours) <5%, <3%, <1%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
15 specification rows
| Wavelength | 1320 nm |
|---|---|
| Output / average power | 1~1000 mW |
| Beam / notes | Fiber output OEM Infrared Laser |
| Operating mode | CW |
| Power stability(rms, over 4 hours) | <5%, <3%, <1% |
| Transverse mode | Multimode |
| Beam divergence, full angle (mrad) | <10 |
| Warm-up time | minutes / <10 |
| Expected lifetime (hours) | 10000 |
| Warranty (years) | 1 |
| Operating voltage(PSU-V-OEM) | 100-240VAC |
| Connection | 9 pin connector |
| Operating temperature | -10°C to 50°C |
| Storage temperature | -20°C to 80°C |
| Humidity | < 90%, non-condensing |
| Dimensions of laser head | 92(L)×40(W)×40(H)mm3 |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
PGL-V-H-1320: 1320 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<5%, <3%, <1%) helps keep measured intensity changes attributable to the sample rather than source drift.
PGL-V-H-1320: 1320 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<5%, <3%, <1%) helps keep measured intensity changes attributable to the sample rather than source drift.
PGL-V-H-1320: 1320 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<5%, <3%, <1%) helps keep measured intensity changes attributable to the sample rather than source drift.
PGL-V-H-1320: Measurement benefits from a stable, focusable source. 1320 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (Multimode) informs waist size and propagation.
System integration
Use these checks to connect PGL-V-H-1320 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Operating temperature: -10°C to 50°C. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: Multimode · Beam divergence, full angle (mrad): <10. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Dimensions of laser head: 92(L)×40(W)×40(H)mm3. Verify the housing drawing and bolt length before designing a mount. A laser head rarely carries a table thread itself, so the adapter between it and an M6 or 1/4"-20 grid is part of the specification.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare PGL-V-H-1320 with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | PGL-V-H-1320 (current) | PGL-V-H-FC-1320 | TEM-F-1312DFB |
|---|---|---|---|
| Wavelength | 1320 nm | 1320 nm | 1312 nm |
| Optical power / pulse energy | 1~1000 mW | 1~500 mW | 1~10 mW |
| Operating mode / pulse width | CW | CW | Confirm for this model |
| Beam quality | Multimode | Multimode | Confirm for this model |
Compare the PGL-V-H-1320 with nearby fiber lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide