Fiber output, PM options, seed formats
MDL-III-1580-SLD-SM is a 1580 nm Fiber laser. Used for medical imaging, flow cytometry, dna sequencing, measurement. Fiber output High Stability Infrared Laser. Key specifications: output / average power 1~17 mW. View specifications, datasheet and enquiry options from Precisometer.
Specifications
2 specification rows
| Wavelength | 1580 nm |
|---|---|
| Output / average power | 1~17 mW |
| Beam / notes | Fiber output High Stability Infrared Laser |
Series-level technical context
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 5 nearby configurations on the same source-product record; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
M², full-angle divergence and pointing stability are not present in this thin record. Treat all three as required order-confirmation fields because they determine focusability, propagation and alignment drift.
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
MDL-III-1580-SLD-SM: 1580 nm emission can be matched to the absorption or excitation band used in Medical imaging. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
MDL-III-1580-SLD-SM: 1580 nm emission can be matched to the absorption or excitation band used in Flow cytometry. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
MDL-III-1580-SLD-SM: 1580 nm emission can be matched to the absorption or excitation band used in DNA sequencing. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
MDL-III-1580-SLD-SM: Measurement benefits from a stable, focusable source. 1580 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MDL-III-1580-SLD-SM with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MDL-III-1580-SLD-SM (current) | TEM-F-1580DFB | MDL-III-1580DFB-SM |
|---|---|---|---|
| Wavelength | 1580 nm | 1580 nm | 1580 nm |
| Optical power / pulse energy | 1~17 mW | 1~20 mW | 1~15 mW |
| Operating mode / pulse width | Confirm for this model | Confirm for this model | Confirm for this model |
| Beam quality | Confirm for this model | Confirm for this model | Confirm for this model |
Compare the MDL-III-1580-SLD-SM with nearby fiber lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide