Communication
PGL-LF-1310: 1310 nm emission must sit inside the fiber-component passband used for Communication; connector polish, fiber mode, linewidth and back-reflection tolerance should be specified as one optical interface.
Power stability, linewidth, beam quality
PGL-LF-13101310 nm infrared CW laser
1310 nmPGL-LF-1310 is a 1310 nm CW laser. Used for communication, spectrum analysis, measurement, flow cytometry. OEM Infrared Laser Module. Key specifications: output / average power 1~10 mW, beam divergence (mrad) <1.5, laser operation mode CW. View specifications, datasheet and enquiry options from Precisometer.
Specifications
PGL-LF-1310
10 specification rows
| Wavelength | 1310 nm |
|---|---|
| Output / average power | 1~10 mW |
| Beam / notes | OEM Infrared Laser Module |
| Beam divergence (mrad) | <1.5 |
| Laser operation mode | CW |
| Modulation optional | TTL 30kHz or analog (0-3V or 0-5V) |
| Connection | Cable with flying leads |
| Operating temperature (°C) | -10°C to +45°C |
| Storage temperature (°C) | -20°C to +80°C |
| Humidity (%) | < 90 %, non-condensing |
| Weight (g) | 45g |
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Spectrum analysis
PGL-LF-1310: 1310 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (<1.5) also controls focusing and collection geometry.
Measurement
PGL-LF-1310: Measurement benefits from a stable, focusable source. 1310 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (<1.5) informs waist size and propagation.
Flow cytometry
PGL-LF-1310: 1310 nm emission can be matched to the absorption or excitation band used in Flow cytometry. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
System integration
Integration and compatibility
Use these checks to connect PGL-LF-1310 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Operating temperature (°C): -10°C to +45°C
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Beam divergence (mrad): <1.5
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
- Mechanical envelope
- Weight (g): 45g
- Verify the housing drawing and bolt length before designing a mount. A laser head rarely carries a table thread itself, so the adapter between it and an M6 or 1/4"-20 grid is part of the specification.
Technical FAQ
Integration questions for PGL-LF-1310
What cooling does the PGL-LF-1310 require?
Operating temperature (°C): -10°C to +45°C. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the PGL-LF-1310 deliver?
Beam divergence (mrad): <1.5. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
How is the PGL-LF-1310 mounted?
Weight (g): 45g. Verify the housing drawing and bolt length before designing a mount. A laser head rarely carries a table thread itself, so the adapter between it and an M6 or 1/4"-20 grid is part of the specification.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare PGL-LF-1310 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | PGL-LF-1310 (current) | MDL-1310(FC) | FC-1310 |
|---|---|---|---|
| Wavelength | 1310 nm | 1310 nm | 1310 nm |
| Optical power / pulse energy | 1~10 mW | 1~2500 mW | 1~5 W |
| Operating mode / pulse width | Confirm for this model | CW | Confirm for this model |
| Beam quality | <1.5 | Multimode | Confirm for this model |
Related cw lasers
Compare the PGL-LF-1310 with nearby cw lasers across the wavelength range.
