Fiber output, PM options, seed formats
FL-H-1064-PS1064 nm near-infrared mode-locked high-power fiber laser
1064 nmFL-H-1064-PS is a 1064 nm Fiber laser. Used for sapphire marking, ceramic cutting, semiconductor cutting, film scribing. Rep. Rate (MHz): 20-120 (Fixed); M²: <1.2. Key specifications: operating mode Mode-locked, output / average power 1-20 W, repetition rate 20-120 MHz (Fixed). View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-H-1064-PS
23 specification rows
| Operating mode | Mode-locked |
|---|---|
| Output / average power | 1-20 W |
| Repetition rate | 20-120 MHz (Fixed) |
| Power stability | <2%, <1% |
| M² | <1.2 |
| Beam / notes | Rep. Rate (MHz): 20-120 (Fixed) |
| Single pulse energy (nJ) | 1-500 |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1064±1 |
| Average power (W) | 1-20 |
| Rep. Rate( MHz) | 20-120 |
| Pulse duration (ps) | <10 |
| Peak power (MW) | 1-50 |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Beam diameter at the aperture (1/e2,mm) | ~2 |
| Beam height from base plate (mm) | 118 |
Applications
Uses named on this model’s datasheet.
- Sapphire marking
- Ceramic cutting
- Semiconductor cutting
- Film scribing
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-H-1064-PS with nearby fiber lasers across the wavelength range.
