Pulse energy, repetition rate, pulse width
EO-LS-10301030 nm near-infrared Q-switched pulsed laser
1030 nmThe EO-LS-1030 is a 1030 nm nanosecond diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Q-switching stores energy in the gain medium while resonator losses are high, then lowers those losses to release a pulse. Pulse energy and repetition rate must be considered together, because changing the pulse spacing changes the average power for a fixed pulse energy. At the nominal 1 kHz repetition rate, pulses shorter than 20 ns arrive about 1 ms apart. The quoted power range represents factory-set configurations; specify the required output rating when ordering.
Specifications
EO-LS-1030
20 specification rows
| Operating mode | Q-switched |
|---|---|
| Output / average power | 1~2 W |
| Pulse energy | 1~2 mJ |
| Beam / notes | Q-switched Infrared Laser |
| Rep. rate (kHz) | 1 |
| Pulse duration (ns) | <20 |
| Ave power stability (rms, 4 hours±3℃) | <5%, <3% |
| Warm-up time (minutes) | <10 |
| M2 factor | <1.3 |
| Cooled method | Air cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-AOM(3U) |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1030±1 |
| Single pulse energy (mJ) | 1-2 |
| Peak power (kW) | 50-200 |
| Beam divergence, full angle (mrad) | <1 |
| Beam diameter at the aperture (1/e2,mm) | ~2 |
| M² | <1.3 |
| Beam height from base plate (mm) | 109 |
What do you need?
Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare EO-LS-1030 with the closest available models in the Pulsed Lasers family.
| Selection parameter | EO-LS-1030 (current) | FS-H-1030A | FS-H-1030B |
|---|---|---|---|
| Wavelength | 1030 nm | 1030 nm | 1030 nm |
| Optical power / pulse energy | 1~2 W | 1~500 mW | 500~3000 mW |
| Operating mode / pulse width | Q-switched | Pulsed | Pulsed |
| Beam quality | <1.3 | <1.2 | <1.2 |
Related pulsed lasers
Compare the EO-LS-1030 with nearby pulsed lasers across the wavelength range.
