Back to Home

Fiber output, PM options, seed formats

FL-525-LN-L525 nm green single-frequency low-noise fiber laser

525 nm

The FL-525-LN-L is a 525 nm continuous-wave fiber laser. Pump energy is supplied to an active fiber, which guides the light and provides optical gain as it propagates. Output coupling then delivers the amplified beam to the experiment. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.

Specifications

FL-525-LN-L

27 specification rows

Output / average power1~2000 mW
Beam / notesFiber laser Low Noise Green Laser
Operating modeCW
Free space output power (mW)1-2000
Fiber coupled output power (mW)1-500
Power stability (rms, 4 hours, ±3℃)<2%, <1%
Transverse modeTEM00
Longitudinal modeSLM
Current adjustment range1-100%
Spectral linewidth (nm)<0.002
Relative intensity noise (rms, 10Hz-3MHz)<0.1%, <0.05%
Frequency shift (MHz) (over ±2℃and 8hours )<±200
M2<1.1
Fiber connectorFC/APC
Fiber length(m)1
Fiber jacketPVC, Metal optional
Polarization ratio (dB)>15 Horizontal (Vertical optional)
Warm-up time (minutes)<30
Cooled methodAir cooled or Water cooled
Operating temperature (℃)15-30
Operating voltage (VAC)110/220V
Expected lifetime (hours)>10000
Wavelength (nm)525±1
M²<1.1
Numerical aperture0.12NA
Beam diameter (mm)~1@free space output
Pointing stability (urad)<50

What do you need?

Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare FL-525-LN-L with the closest available models in the Fiber Lasers family.

Selection parameterFL-525-LN-L (current)FL-525-SLM525
Wavelength525 nm525 nm525 nm
Optical power / pulse energy1~2000 mW1~2000 mW1~2000 mW
Operating mode / pulse widthCWCW—
Beam quality<1.1<1.1<1.1