1634 models · 324 series
261nm CW DUV Laser
4 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Modulation option | Cooled method | Power supply (100-240VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-261-LN | 261 nm | 1~800 mW | <0.003 nm | <0.5% | Noise <1% | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | – | – | – | – | – | – | – | Datasheet |
| UV-FN-261 | 261 nm | 1~10 mW | <0.2 nm | <2% | – | TEM00 | <1.0 | – | – | – | – | >10000 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | DC-1kHz; TTL and Analog optional | – | – | Datasheet |
| UV-DP-261-A | 261 nm | 10~100 mW | <0.2 nm | <1% | – | Near TEM00 | <3.0 | <10 | – | 10-35 | – | >10000 | – | >100:1, Vertical (Horizontal optional) | – | – | – | Air Cooled | PSU-DP-A | Datasheet |
| UV-DP-261-B | 261 nm | 100~1500 mW | <0.2 nm | <0.5% | – | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | – | – | – | – | DC-1kHz; TTL and Analog optional | – | – | Datasheet |
266nm CW DUV Laser
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-266-B | 266 nm | 1~1500 mW | <0.2 nm | <0.5% | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
320nm CW Pulse UV Laser
8 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Transverse mode | Longitudinal mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability Over Temperature(urad/℃) | Frequency shift (MHz)(Over±2℃and 8hrs) (optional) | Operating Temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing Stability Over Temperature(μrad/°C) | Operating voltage (VDC) | Cooled method (Water cooled) | Warm-up time (minutes) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-320 | 320 nm | 1~30 mW | <1 MHz | <0.5% | <0.5% | TEM00 | Single | <1.5 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-320-X | 320 nm | 1~50 mW | <1 MHz | <1% | <0.25% | TEM00 | – | <1.2 | ~0.7 | <1.0 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | – | >10000 | <8 | 12V | – | – | – | – | – | – | Datasheet |
| MSL-R-320 | 320 nm | 50~300 mW | < 5 MHz | <1% | <0.5% | TEM00 | Single | <1.2 | <1.5 | – | >100:1 Vertical (Horizontal optional) | – | – | 20-30 | – | >10000 | <8 | – | WCH-580 | – | – | – | – | – | Datasheet |
| UV-FN-320-LN | 320 nm | 1~30 mW | < 0.003 nm | <1% | <1% | TEM00 | – | – | – | – | – | – | – | 10-35 | PSU-H-FDA | >10000 | <8 | – | – | <10 | Air Cooled/ Water Cooled | – | – | – | Datasheet |
| UV-DP-320-LN | 320 nm | 30~1500 mW | <0.003 nm | <0.5% | <1% | Near TEM00 | – | – | <3.0 | – | – | – | – | – | – | >10000 | – | 12V/ 25A | – | <10 | – | WCH-580 | 10-35 | – | Datasheet |
| UV-FN-320 | 320 nm | 1~100 mW | < 0.2 nm | <1% | – | TEM00 | – | – | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | – | >10000 | <8 | – | – | – | – | – | – | DC-1kHz; TTL and Analog optional | Datasheet |
| UV-DP-320-A | 320 nm | 100~500 mW | < 0.2 nm | <1% | – | Near TEM00 | – | – | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | PSU-DP-A | >10000 | – | – | – | <10 | Air Cooled | – | 10-35 | – | Datasheet |
| UV-DP-320-B | 320 nm | 500~4000 mW | < 0.2 nm | <0.5% | – | Near TEM00 | – | – | <3.0 | – | – | – | – | – | – | >10000 | – | 12V/ 25A | – | <10 | – | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | Datasheet |
349nm CW Pulse UV Laser
8 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Longitudinal mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability Over Temperature(urad/℃) | Frequency shift (MHz)(Over±2℃and 8hrs) (optional) | Operating Temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing Stability Over Temperature(μrad/°C) | Cooled method (Water cooled) | Warm-up time (minutes) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-349 | 349 nm | 1~10 mW | <1 MHz | <1% | <1% | – | TEM00 | Single | <1.5 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-349-X Ultra-compact | 349 nm | 1~50 mW | <1 MHz | <0.5% | <0.25% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-349 | 349 nm | 100~400 mW | < 5 MHz | <1% | <0.5% | – | TEM00 | Single | <1.2 | <1.5 | – | >100:1 Vertical (Horizontal optional) | – | – | 20-30 | – | >10000 | <8 | WCH-580 | – | – | – | – | – | – | Datasheet |
| UV-FN-349-LN | 349 nm | 1~50 mW | < 0.003 MHz | <1% | <1% | – | TEM00 | – | – | – | – | – | – | – | 10-35 | PSU-H-FDA | >10000 | <8 | – | <10 | Air Cooled/ Water Cooled | – | – | – | – | Datasheet |
| UV-DP-349-LN | 349 nm | 50~2000 mW | < 0.003 MHz | <0.5% | <1% | – | Near TEM00 | – | – | <3.0 | – | – | – | – | – | – | >10000 | – | – | <10 | – | WCH-580 | 10-35 | 12V/ 25A | – | Datasheet |
| UV-FN-349 | 349 nm | 1~150 mW | <0.2 nm | <1% | – | <1.5 | TEM00 | – | – | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | – | >10000 | <8 | – | – | – | – | – | – | DC-1kHz; TTL and Analog optional | Datasheet |
| UV-DP-349-A | 349 nm | 150~400 mW | <0.2 nm | <1% | – | – | Near TEM00 | – | – | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | PSU-DP-A | >10000 | – | – | <10 | Air Cooled | – | 10-35 | – | – | Datasheet |
| UV-DP-349-B | 349 nm | 400~4000 mW | <0.2 nm | <0.5% | – | <1.2 | Near TEM00 | – | – | <3.0 | – | – | – | – | – | – | >10000 | – | – | <10 | – | WCH-580 | 10-35 | 12V/ 25A | DC-1kHz; TTL and Analog optional | Datasheet |
355nm CW Pulse UV Laser
13 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Transverse mode | Warm-up time (minutes) | Pointing Stability Over Temperature(μrad/°C) | Cooled method | Operating Temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | printing, | M2 | Polarization ratio | Pointing stability after warm-up (mrad) | Cooled method (Water cooled) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Operating temperature (°C) | Operating voltage (VDC) | Beam diameter at the aperture (1/e2, mm) | Modulation option | Fiber connector | Fiber jacket | Fiber length | Beam diameter at the aperture (mm) | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-3 55 | 355 nm | 1~10 mW | <1 MHz | <2% | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-3 55 | 355 nm | 10~100 mW | <5 MHz | <1% | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UV-FN-355-LN | 355 nm | 1~10 mW | < 0.003 nm | <2% | <1% | TEM00 | <10 | <8 | Air Cooled/ Water Cooled | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-A-355 | 355 nm | 10~50 mW | <0.003 nm | <1% | <1% | TEM00 | <10 | – | – | 10-35 | PSU-W-FDA | >10000 | holography, / laser / display, / submarine / communication, | ~3.0 | >100:1 Horizontal (Vertical optional) | <0.05 | WCH-580 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-K-355 | 355 nm | 50~500 mW | <0.03 nm | <0.5% | <0.2% | TEM00 | <10 | – | Water Cooled | – | – | >10000 | – | <1. 1 | >50:1 (>100:1 optional), Horizontal (Vertical optional) | – | – | ~1.5 | <20 | 10-35 | 24V/31.3A | – | – | – | – | – | – | – | Datasheet |
| UV-FN-355 | 355 nm | 1~50 mW | < 0.2 nm | <2% | – | TEM00 | – | <8 | – | 10-35 | – | >10000 | – | – | >100:1, Vertical (Horizontal optional) | – | – | <1.2 | – | – | – | <1.0 | DC-1kHz; TTL and Analog optional | – | – | – | – | – | Datasheet |
| UV-A-355 | 355 nm | 50~450 mW | <0.2 nm | <1% | – | TEM00 | <10 | <8 | – | 10-35 | PSU-W-FDA | >10000 | – | – | >100:1 Horizontal (Vertical optional) | – | WCH-580 | <3.0 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-B-355 | 355 nm | 100~1000 mW | <0.04 nm | <1% | – | TEM00 | <10 | – | Water cooled | 10-35 | – | >10000 | – | <1.1 / <1.2 | >100:1 Horizontal | – | – | <5 | – | – | 24V/13A | – | – | – | – | – | – | – | Datasheet |
| UV-C-355 | 355 nm | 1~2 W | <0.04 nm | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-D-355 | 355 nm | 2~5 W | <0.08 nm | <1% | – | – | <10 | – | Water cooled | 10-35 | – | >10000 | – | <1.5 | >100:1 Horizontal | – | – | <4.5 | – | – | DC 36V/ 19.6A | – | – | – | – | – | – | – | Datasheet |
| UV-FN-355-SM | 355 nm | 1~20 mW | <0.2 nm | < 3 % | – | TEM00 | <10 | – | – | 10-35 | PSU-H-FDA | >10000 | – | <1.2 | – | – | – | – | – | – | – | – | DC-1kHz; TTL and Analog optional | FC/APC | PVC | 1m | – | – | Datasheet |
| MPL-355 (FC) | 355 nm | 1~1500 mW | – | <1% | – | TEM00 | <5 | – | – | – | PSU-SR | >10000 | – | <2.0 | – | – | – | – | – | – | – | – | – | – | – | – | ~1.5 | 10-35 | Datasheet |
| MPL-355 | 355 nm | 1~1500 mW | – | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
360nm CW Pulse UV Laser
9 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | Longitudinal mode | Pointing stability Over Temperature(urad/℃) | Frequency shift (MHz)(Over±2℃and 8hrs) (optional) | Power supply (100-240VAC) | Warm-up time (minutes) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Fiber connector | Fiber jacket | Fiber length | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-FN-360-X | 360 nm | 1~50 mW | <1 MHz | <0.5% | <0.25% | TEM00 | <1.2 | ~0.7 | <1.0 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | 12V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-360 | 360 nm | 1~80 mW | <1 MHz | <1% | <0.5% | TEM00 | <1.5 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | – | 10-35 | – | >10000 | Single | <8 | <±200 | PSU-H-FDA | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-3 60 | 360 nm | 80~300 mW | < 5 MHz | <1% | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UV-FN-360-LN | 360 nm | 1~100 mW | < 0.003 nm | <0.5% | <1% | TEM00 | – | – | – | – | <8 | 10-35 | – | >10000 | – | – | – | PSU-H-FDA | <10 | Air Cooled/ Water Cooled | – | – | – | – | – | – | Datasheet |
| UV-DP-360-LN | 360 nm | 100~1500 mW | <0.003 nm | <0.5% | <1% | Near TEM00 | – | <3.0 | – | – | – | – | 12V/ 25A | >10000 | – | – | – | – | <10 | – | WCH-580 | 10-35 | – | – | – | – | Datasheet |
| UV-FN-3 60 | 360 nm | 1~150 mW | <0.2 nm | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UV-DP-360-A | 360 nm | 150~400 mW | <0.2 nm | <1% | – | Near TEM00 | – | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | – | – | – | PSU-DP-A | <10 | Air Cooled | – | 10-35 | – | – | – | – | Datasheet |
| UV-DP-360-B | 360 nm | 400~4000 mW | <0.2 nm | <0.5% | – | Near TEM00 | – | <3.0 | – | – | – | – | 12V/ 25A | >10000 | – | – | – | – | <10 | – | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | – | – | – | Datasheet |
| UV-FN-360-SM | 360 nm | 1~50 mW | <0.2 nm | <1% | – | TEM00 | <1.2 | – | – | – | – | 10-35 | – | >10000 | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | <10 | – | – | – | DC-1kHz; TTL and Analog optional | FC/APC | PVC | 1m | Datasheet |
405nm CW Pulse Violet Blue Laser
32 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Longitudinal mode | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Beam diameter at the aperture (1/e2,mm) | M2 | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (220/110VAC) | Expected lifetime (hours) | Transverse mode | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Parameters of customed power supply | Polarization direction | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | Operating voltage(external PCB1) | stability | Operating voltage(internal PCB) | Modulation optional | Storage temperature (°C) | Humidity (%) | Dimensions of laser head (mm) | Operating voltage(PSU-II-OEM) | Dimensions of internal PCB | Beam size (<250mm) | Beam divergence (mrad) | Laser operation mode | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-T-405 | 405 nm | 1~80 mW | <0.000005 nm (<10 MHz) Coherent length >30m | – | <0.5% | Single | <1%, <0.5% | <1 | <2 | <1.2 | >100:1,Vertical(Horizontal optional) | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-405 | 405 nm | 1~50 mW | – | <1% | – | – | – | ~2.5×0.2 | – | – | – | Air cooled | – | – | >10000 | Multimode | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-E-405 | 405 nm | 1~50 mW | < 0.03 nm | <1% | – | – | – | ~2.5×0.2 | – | – | – | Air cooled | – | – | >10000 | Multimode | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TUN-403~406 Wavelength tunable | 405 nm | 1~30 mW | <0.1 nm | <1% | – | – | – | <1.0 | – | – | – | – | 20-30 | – | >10000 | Near TEM00 | <5 | – | PSU-TUN | TEC: 7-12kΩ | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-405 | 405 nm | 1~30 mW | – | <0.5% | <0.5% | – | – | <1.5 | – | <1.1 | – | – | – | – | >10000 | TEM00 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-405L | 405 nm | 1~300 mW | – | <0.5% | <0.5% | – | – | – | – | <1.5 / <1.2 | – | Conduction | – | – | >10000 | Near TEM00 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-405 | 405 nm | 1~1000 mW | – | <0.5% | <0.5% | – | – | <2.5×1.0 | – | – | – | Conduction | – | – | >10000 | – | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-405 | 405 nm | 1~3 W | – | <0.5% | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-405-SM | 405 nm | 1~30 mW | – | <0.5% | <0.5% | – | – | <2.5×1.0 | – | – | – | Conduction | – | – | >10000 | – | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-405 | 405 nm | 1~30 mW | – | <0.5% | – | – | – | <1.5 | – | <1.1 | – | – | – | – | >10000 | TEM00 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-405 | 405 nm | 1~200 mW | – | <0.5% | – | – | – | ~2.5×0.2 | – | – | – | Air cooled | – | – | >10000 | Multimode | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-405L | 405 nm | 1~300 mW | – | <0.5% | – | – | – | – | – | <1.5 / <1.2 | – | Conduction | – | – | >10000 | Near TEM00 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-405 | 405 nm | 1~1000 mW | – | <0.5% | – | – | – | <2.5×1.0 | – | – | – | Conduction | – | – | >10000 | Multimode | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-405 | 405 nm | 1~3 W | – | <0.5% | – | – | – | ~2.5×0.2 | – | – | – | Air cooled | – | – | >10000 | Multimode | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-405 | 405 nm | 1~4000 mW | – | <0.5% | – | – | – | ~2.8×0.5 / ~4.3×0.5 | – | – | – | – | 25±3 | – | >10000 | Multimode | <5 | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | – | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-405 | 405 nm | 4~16 W | – | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM -405 | 405 nm | 1~30 mW | – | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| YL-I-405 | 405 nm | 1~24 W | – | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-FP-405 | 405 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-FC-405 | 405 nm | 1~50 mW | – | – | – | – | – | <0.5 / <3×0.5 | – | – | – | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-D8-405 | 405 nm | 1~50 mW | – | <0.5% | – | – | – | – | – | – | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | – | – | 1 | – | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90%, non-condensing | – | 6VDC | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-F-405 | 405 nm | 1~50 mW | – | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-D12-405 | 405 nm | 1~100 mW | – | <0.5% | – | – | – | – | – | – | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | – | – | 1 | – | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90%, non-condensing | – | 6VDC | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-405 | 405 nm | 1~100 mW | – | <5% | – | – | – | – | – | – | – | – | – | – | – | – | – | 10°C to 35°C | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | – | – | lifetime | 5VDC | TTL or Analog0-3V,0-5V | -10°C to 70°C | <90 %, non-condensing | Φ56×250mm2 / (PGL-FC-375/589) | – | – | – | – | – | – | Datasheet |
| PGL-FS-405 | 405 nm | 1~150 mW | – | <0.5% | – | – | – | – | – | – | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | – | minutes / <10 | 1 | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | 7V / (TTL30kHz or Analog 0-5V,optional) | – | – | – | – | – | Datasheet |
| PGL-VI-405 | 405 nm | 1~150 mW | – | <0.5% | – | – | – | – | – | – | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | – | – | 1 | – | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90%, non-condensing | – | – | – | 6VDC | – | – | – | – | – | mm2 / Φ12×50 | – | – | – | – | Datasheet |
| PGL-H-405 | 405 nm | 1~350 mW | – | <0.5% | – | – | – | – | – | – | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | – | minutes / <10 | 1 | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | 7V / (TTL30kHz or Analog 0-5V,optional) | – | – | – | – | – | Datasheet |
| PGL-V-H-FC-405 | 405 nm | 1~500 mW | – | <1% | – | – | – | <0.5 / <3×0.5 | – | – | – | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | minutes / <10 | – | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-405 | 405 nm | 1~800 mW | – | <0.5% | – | – | – | <0.5 / <3×0.5 | – | – | – | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL/MDL-L series | 405 nm | 1~1000 mW | – | <0.5% | – | – | – | – | – | – | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | – | minutes / <10 | 1 | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | 7V / (TTL30kHz or Analog 0-5V,optional) | – | – | – | – | – | Datasheet |
| PGL-LF-405 | 405 nm | 1~150 mW | – | – | – | – | – | – | – | – | – | – | – | – | 10000 | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | – | – | – | DC 5V | TTL 30kHz or analog (0-3V or 0-5V) | -20°C to +80°C | < 90 %, non-condensing | – | – | – | 40-200um | <1.5 | CW | 45g | Datasheet |
| TUN-403~406 | 405 nm | 1~30 mW | <0.1 nm | <1% | – | – | – | <1.0 | – | – | – | – | 20-30 | – | >10000 | Near TEM00 | <5 | – | PSU-TUN | TEC: 7-12kΩ | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
410nm CW Pulse Violet Blue Laser
10 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | noise, | Operating temperature (℃) | Parameters of customed power supply | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-C-410 | 410 nm | 1~50 mW | – | <1% | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-LN-410 | 410 nm | 1~40 mW | – | <0.5% | <0.5% | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | Datasheet |
| MLL-III-410L | 410 nm | 1~300 mW | – | <0.5% | <0.5% | Near TEM00 | <1.5 / <1.2 | – | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | Datasheet |
| MLL-III-410 | 410 nm | 1~300 mW | – | <0.5% | <0.5% | – | – | <0.5×2.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | Datasheet |
| MLL-III-410-SM | 410 nm | 1~40 mW | – | <0.5% | <0.5% | – | – | <0.5×2.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | Datasheet |
| TEM-F-410 | 410 nm | 1~40 mW | – | <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | Datasheet |
| MDL-III-410L | 410 nm | 1~300 mW | – | <0.5% | – | Near TEM00 | <1.5 / <1.2 | – | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | Datasheet |
| MDL-III-410 | 410 nm | 1~300 mW | – | <0.5% | – | Multimode | – | <0.5×2.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | Datasheet |
| FC-OEM -410 | 410 nm | 1~40 mW | – | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | |
| TUN-408~411 | 410 nm | 1~30 mW | <0.1 nm | <1% | – | Near TEM00 | – | <1.0 | <5 | – | PSU-TUN | >10000 | – | narrow / linewidth, / wavelength / tunable | 20-30 | TEC: 7-12kΩ | Datasheet |
473nm CW Pulse Blue Laser
18 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Longitudinal mode | Warm-up time (minutes) | Frequency shift over 8 hours (MHz) (optional) | Shock tolerance (6ms) | Expected lifetime (hours) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Pointing stability over temperature (urad /°C) | Beam divergence, full angle (mrad) | Modulation optional | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Pointing Stability Over Temperature (urad/°C) | Cooled method | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | Fiber Jacket | Operating temperature (℃) | Power supply (VDC) | made features of ultra compact, long Polarization ratio | Modulation option | Warranty (years) | Operating voltage(internal PCB) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of PGL-VI-473 | Dimensions of PGL-VI-1-473 | Dimensions of external | Beam diameter at the aperture(1/e2) (mm) | Operating voltage(external PCB) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-S-473-D | 473 nm | 1~30 mW | <1 MHz | <1% | <0.2% | – | TEM00 | Single | <5 | <±200 | 7g laterally,15g vertically | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-U-473 | 473 nm | 1~100 mW | <1 MHz | <0.5% | <0.5% | – | TEM00 | Single | <5 | – | – | >10000 | <1.2 | <1.0 | <1.5 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-473 | 473 nm | 100~300 mW | <1 MHz | <1% | <0.5% | – | TEM00 | Single | <5 | – | – | >10000 | <1.2 | <2.0 | – | >100:1, Vertical (Horizontal optional) | – | <±200 | 10-35 | PSU-H-FDA | – | <8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-473-AOM | 473 nm | 1~200 mW | <1 MHz | <1% | <0.5% | – | TEM00 | Single | <5 | – | – | >10000 | <1.2 | – | – | >100:1, Vertical (Horizontal optional) | <8 | – | 10-35 | PSU-H-FDA-AOM | – | – | <1.5 | DC-1MHz;TTL or Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-473 | 473 nm | 1~100 mW | < 0.003 nm | <1% | <1% | – | TEM00 | – | <5 | – | – | >10000 | – | <1.0 | <1.5 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-FDA | – | – | – | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-473 | 473 nm | 100~400 mW | < 0.003 nm | <1% | <1% | – | TEM00 | – | <5 | – | – | >10000 | <1.2 | – | <1.0 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-FDA | – | – | – | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-W-473 | 473 nm | 400~2000 mW | < 0.1 nm | <1% | <3% | – | TEM00 | – | – | – | – | >10000 | <1.3 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | 10-35 | PSU-W-LED | – | – | ~1.0 | – | – | – | <20 | Water Cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-473-SM | 473 nm | 1~50 mW | < 0.003 nm | <1% | <1% | – | TEM00 (single mode fiber output) | – | <10 | – | – | >10000 | <1.1 | – | – | – | – | – | 10-35 | PSU-H-FDA | – | – | – | – | – | PSU-SR-OEM (12V/25A) | – | – | 0.10-0.15 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-W-473-SM | 473 nm | 50~1000 mW | < 0.1 nm | <2% | <1% | – | TEM00 (single mode fiber output) | – | <10 | – | – | ＞10000 | <1.1 | – | – | – | – | – | 10-30 | PSU-W-LED | – | – | – | – | – | – | – | Water cooled | – | – | FC/APC | – | 1m | >50:1 after PM fiber | PVC, Metal optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-S-473 | 473 nm | 1~50 mW | < 0.2 nm | <0.5% | – | <1.2 | TEM00 | – | <5 | – | 7g laterally, 15g vertically | >10000 | – | <1.0 | <1.5 | >100:1, Vertical (Horizontal optional) | – | – | – | PSU-A-F/PSU-A-D | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | <8 | – | – | – | – | – | – | – | – | – | – | 10-35 | PSU-A-F-OEM (5V/5A) | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-U-473 | 473 nm | 50~300 mW | < 0.2 nm | <0.5% | – | <1.2 | TEM00 | – | <5 | – | – | >10000 | – | <1.0 | <1.5 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-LED/PSU-H-FDA/PSU-SR | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-FN-473 | 473 nm | 300~1000 mW | < 0.2 nm | <1% | – | – | TEM00 | – | <5 | – | – | >10000 | <1.5 | – | – | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | – | – | – | <8 | PSU-SR-OEM(12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-F-473 | 473 nm | 1~500 mW | < 0.2 nm | <0.5% | – | – | – | – | <5 | – | – | >10000 | <1.5 | – | – | – | – | – | 10-35 | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-W-473 | 473 nm | 500~2000 mW | < 0.1 nm | <1% | – | – | TEM00 | – | – | – | – | >10000 | <1.3 | ~2.0 | – | – | – | – | 10-35 | PSU-W-FDA/PSU-W-LED | – | – | ~1.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-III-473-AOM | 473 nm | 1~50 mW | < 0.2 nm | <1% | – | – | TEM00 | – | <10 | – | – | >10000 | <1.5 | – | – | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-III-FDA-AOM | – | – | – | DC-1MHz; TTL or Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-FN-473-AOM | 473 nm | 50~150 mW | < 0.2 nm | <1% | – | – | TEM00 | – | <5 | – | – | >10000 | <1.5 | – | – | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-FDA-AOM | – | – | – | DC-1MHz; TTL or Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-473 | 473 nm | 1~20 mW | – | – | – | – | TEM00 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1 | 3VDC | Cable with flying leads | 10°C to 35°C | -20°C to 80°C | <90%, non-condensing | Φ20×100mm2 | Φ15×65mm2 | control 750hz frequency) | – | – | Datasheet |
| PGL-H1-473 | 473 nm | 1~50 mW | – | – | – | – | Near TEM00 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1 | 3VDC | – | 10°C to 35°C | -20°C to 80°C | – | – | – | – | ~1.5 | 5VDC | Datasheet |
425 NM Blue Violet Laser, Diode Laser, Blue Laser |
1 model429 NM Blue Violet Laser, Diode Laser, Blue Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MBL-U-430-SF | 429 nm | 1~150 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
433 NM Blue Violet Laser, Diode Laser, Blue Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MBL-U-433-SF | 433 nm | 1~300 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
438 NM Blue Violet Diode Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-438 | 438 nm | 1~500 mW | <2%, <1%, <0.5% | <1%, <0.5% | <2.1×1.6 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Datasheet |
| MDL-III-438 | 438 nm | 1~500 mW | <2%, <1%, <0.5% | – | <2.1×1.6 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Datasheet |
440 NM Laser, Violet Blue Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-440 | 440 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Datasheet |
| MLL-H-440 | 440 nm | 1~3 W | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-440 | 440 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Datasheet |
| MDL-H-440 | 440 nm | 1~3 W | <2%, <1%, <0.5% | – | 1.4×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Datasheet |
444 NM Blue Violet Diode Laser.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-C-444 | 444 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | 1.4×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
470nm Blue Laser, Blue Diode Laser, Diode Laser Module |
8 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Operating temperature (℃) | Polarization direction | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-470 | 470 nm | 1~800 mW | <2%, <1%, <0.5% | <1%, <0.5% | <2.5×0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | Datasheet |
| MLL-F-470 | 470 nm | 800~1500 mW | <2%, <1%, <0.5% | <1%, <0.5% | ~2.5×0.5 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | 10-35 | – | – | – | – | Datasheet |
| MDL-III-470 | 470 nm | 1~800 mW | <2%, <1%, <0.5% | – | <2.5×0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | – | Datasheet |
| MDL-F-470 | 470 nm | 800~1500 mW | – | – | ~2.5×0.5 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | 10-35 | – | – | – | – | Datasheet |
| F-470-HS | 470 nm | 800~1500 mW | – | – | ~2.5×0.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | Multimode | – | – | – | – | – | Datasheet |
| MDL-MD-470 | 470 nm | 1~6000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Multimode | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | Datasheet |
| MDL-HD-470 | 470 nm | 4~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-470 | 470 nm | 8~16 W | – | – | <2.4×2.0 | <5 | – | – | PSU-N-LED/ PSU-N-FDA | 10000 | – | 10-35 | Horizontal+Vertical | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
483 NM Blue Diode Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-483L | 483 nm | 1~50 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <2.0 / <1.5 | ~1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-483L | 483 nm | 1~50 mW | <2%, <1%, <0.5% | – | – | <2 / <1.5 | ~1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
484 NM Blue Violet Laser, Diode Laser, Blue Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MBL-U-484-SF | 484 nm | 1~20 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
495 NM Blue Diode Laser.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-495L | 495 nm | 1~50 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <2.0 / <1.5 | ~1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-495L | 495 nm | 1~50 mW | <2%, <1%, <0.5% | – | – | <2 / <1.5 | ~1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| PGL-FP-495 | 495 nm | 1~20 mW | – | – | – | – | – | – | – | – | – | – |
496 NM Blue Solid State Laser.
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| U-496-SF | 496 nm | 1~100 mW | |
| MBL-U-496-SF | 496 nm | 1~100 mW |
505 NM Green Laser, Diode Laser |
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-505 | 505 nm | 1~30 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | Datasheet |
| III-505L | 505 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | |
| MLL-III-505-SM | 505 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | |
| TEM-F-505 | 505 nm | 1~30 mW | <2%, <1%, <0.5% | TEM00 | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | Datasheet |
| MDL-XS-505 | 505 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | Datasheet |
| U-505-SF | 505 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | |
| MDL-III-505-SM | 505 nm | 1~30 mW | – | – | – | – | – | – | – | – | – |
530nm Green Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MGL-S-530-D | 530 nm | 1~50 mW |
550 NM Green Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms,20Hz-20MHz) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability over temperature (urad /°C) | Frequency shift (MHz)(over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-550 | 550 nm | 1~200 mW | <3%, <2%, <1% | TEM00 | Single | <1MHz | <1%, <0.5% | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | Datasheet |
552 NM Green Laser, Solid State Laser |
3 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam divergence (mrad) | Polarization ratio | Pointing stability over temperature (μrad/°C) | Modulation optional | Power stability (rms, 4 hours±3℃) | M2 | Beam diameter at the aperture (1/e2, mm) | Pointing stability after warm-up (mrad) | Cooled method (Water cooled) | Operating Temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-552 | 552 nm | 1~100 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-552 | 552 nm | 1~300 mW | TEM00 | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <1.5 | >100:1, Vertical (Horizontal optional) | <8 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | Datasheet |
| MGL-A-552 | 552 nm | 300~2000 mW | TEM00 | – | – | – | <10 | – | – | – | PSU-W-FDA | >10000 | – | >100:1 Horizontal (Vertical optional) | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | <3%, <2% (<1% optional) | <2.0 | <1.5 | <0.05 | WCH-580 | 10-35 | Datasheet |
555nm Yellow Green Laser, Solid State Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-555 | 555 nm | 1~100 mW | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
565 NM Yellow Green Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MGL-U-565-SF | 565 nm | 1~200 mW | TEM00 | ~3.0 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
Infrared Laser AT 2130 NM
1 model| Model | Wavelength | Output / average power | Beam divergence, full angle (mrad) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | during operations, etc. | Operating temperature (℃) | Power supply | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| OEM-IR-2130 | 2130 nm | 1~6 W | <3 | <5%, <3% | <10 | Cooled method / Water cooled | 10-30 | PSU-MIR (3U) | >10000 | Datasheet |
10.5 ΜM Infrared Laser， Solid State Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-10500-DFB | 10500 nm | 1~5 mW | |
| MDL-XN-10500 | 10500 nm | 1~200 mW |
Infrared Laser, 1020 NM Infrared Laser Module, Infrared Diode Lasers.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1020 | 1020 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | Datasheet |
| MDL-XF-1020 | 1020 nm | 500~3000 mW | – | Multimode | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | 10-35 | Datasheet |
Infrared Laser, 1035 NM Infrared Laser Module, Infrared DPSS Lasers.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1035 | 1035 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-1035 | 1035 nm | 1~2 W | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1035 | 1035 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-1035 | 1035 nm | 1~2 W | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XF-1035 | 1035 nm | 2~3 W | – | – | – | – | – | – | – | – | Datasheet |
1105 NM Infrared Laser, Solid State Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-F-1105 | 1105 nm | 1~500 mW | TEM00 | ~1.5 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
| MIL-W-1105 | 1105 nm | 500~4000 mW | – | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser, 1130 NM Infrared Diode Lasers, High Power Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1130 | 1130 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-1130 | 1130 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XF-1130 | 1130 nm | 2~5 W | – | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser, 1140 NM Infrared Diode Lasers, High Power Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1140 | 1140 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-1140 | 1140 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XF-1140 | 1140 nm | 2~5 W | – | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser, 1150 NM Infrared Diode Lasers, High Power Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1150 | 1150 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1150 | 1150 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-1150(FC) | 1150 nm | 1~800 mW | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1160 NM Infrared Lasers, High Power Diode Laser System
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XF-1160 | 1160 nm | 1~5000 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
Infrared Laser, 1190 NM Infrared Laser Module, Infrared DPSS Lasers.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-1190 | 1190 nm | 1~3000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-F-1190 | 1190 nm | 1~3000 mW | – | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
Infrared Diode Laser, 1208 NM Infrared Diode Lasers, High Power Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1208 | 1208 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-H-1208 | 1208 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-HD-1208 | 1208 nm | 1~3500 mW | <2%, <1%, <0.5% | Multimode | – | <5 | – | – | – | PSU-N-FDA/PSU-N-LED | >10000 | Horizontal+ Vertical | 25±3 | Datasheet |
1250nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-1250 | 1250 nm | 1~40 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | Datasheet |
| MLL-III-1250-SM | 1250 nm | 1~40 mW | – | – | – | – | – | – | – | – | – |
1268nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1268-SM | 1268 nm | 1~10 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1273nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1273-SM | 1273 nm | 1~10 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1290nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1290-SM | 1290 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1309nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MLL-III-1309-SM | 1309 nm | 1~15 mW |
1312nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1312-SM | 1312 nm | 1~10 mW | <2%, <1%, <0.5% | <1%, <0.5% | 1m | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
Infrared Laser,1320 NM Infrared Diode Lasers,infrared Diode Laser System.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1320 | 1320 nm | 1~800 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1320-SLD | 1320 nm | 1~34 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1320 | 1320 nm | 1~800 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-1320 | 1320 nm | 800~3000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-III-1320-SLD-SM | 1320 nm | 1~34 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1330nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1330-SM | 1330 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
Infrared Laser, 1335 NM Infrared Laser Module, Infrared DPSS Lasers
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-H-1335 | 1335 nm | 1~500 mW | TEM00 | <1.5 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
Infrared Laser, 1338 NM Infrared Laser Module, Infrared DPSS Lasers
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-H-1338 | 1338 nm | 1~500 mW | TEM00 | <1.5 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
1350nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1350-SM | 1350 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1357 NM DPSS Infrared Laser, Infrared Laser
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-FN-1357 | 1357 nm | 1~400 mW | <5%, <3%, <2% | TEM00 | <1.5 | <1.2 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
1368nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1368-SM | 1368 nm | 1~10 mW | <2%, <1%, <0.5% | <1%, <0.5% | 1m | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
Infrared Laser,1370 NM Infrared Diode Lasers,infrared Diode Laser System.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | M2 after fiber | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1370L | 1370 nm | 1~15 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <2.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MLL-III-1370-SM | 1370 nm | 1~15 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | Datasheet |
| TEM-F-1370DFB | 1370 nm | 1~5 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1370L | 1370 nm | 1~15 mW | <2%, <1%, <0.5% | Near TEM00 | – | <2.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MDL-III-1370-SM | 1370 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1370DFB-SM | 1370 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1380 NM Infrared Diode Lasers,infrared Diode Laser System.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1380 | 1380 nm | 1~800 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1380 | 1380 nm | 1~800 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1390nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1390-SM | 1390 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1392nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1392-SM | 1392 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1410nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1410-SM | 1410 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
Infrared Laser,1420 NM Infrared Diode Lasers,infrared Diode Laser System.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1420 | 1420 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-1420 | 1420 nm | 500~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-III-1420 | 1420 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-1420 | 1420 nm | 500~1500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
Infrared Laser,1430 NM Infrared Diode Lasers,infrared Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | M2 after fiber | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1430 | 1430 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MLL-H-1430 | 1430 nm | 500~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | Datasheet |
| MLL-III-1430-SM | 1430 nm | 1~15 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | Datasheet |
1480nm TEM00 Mode Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-1480 | 1480 nm | 1~350 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1480 | 1480 nm | 1~350 mW | <2%, <1%, <0.5% | TEM00 | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-LF-1480 | 1480 nm | 1~10 mW | – | – | – | – | – | – | -10°C to +45°C | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-1480 | 1480 nm | 1~1000 mW | – | Multimode | – | – | <10 | – | – | – | 10000 | – | – | – | 9 pin connector | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
1490nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1490-SM | 1490 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| FC-OEM-1490 | 1490 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1510nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1510-SM | 1510 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1512nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1512-SM | 1512 nm | 1~10 mW | <2%, <1%, <0.5% | <1%, <0.5% | 1m | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1530nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1530-SM | 1530 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | 1m | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1540nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-OEM-1540 | 1540 nm | 1~15 mW |
Infrared Laser, 1568 NM Infrared Laser Module, Infrared DPSS Lasers.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MLL-III-1568-SM | 1568 nm | 1~15 mW |
Infrared Laser, 1570 NM Infrared Laser Module, Infrared DPSS Lasers.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MLL-III-1570-SM | 1570 nm | 1~15 mW |
Infrared Laser, 1580 NM Infrared Laser Module, Infrared DPSS Lasers.
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MLL-III-1580-SM | 1580 nm | 1~15 mW | |
| MIL-1580(FC) | 1580 nm | 1~20 mW |
1590nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1590DFB | 1590 nm | 1~20 mW | |
| MDL-III-1590DFB-SM | 1590 nm | 1~15 mW |
1610nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1610DFB | 1610 nm | 1~20 mW | |
| MDL-III-1610DFB-SM | 1610 nm | 1~15 mW |
1620nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1620DFB | 1620 nm | 1~5 mW | |
| MDL-III-1620DFB-SM | 1620 nm | 1~5 mW |
1625nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1625DFB | 1625 nm | 1~5 mW | |
| MDL-III-1625DFB-SM | 1625 nm | 1~5 mW |
1627nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1627DFB | 1627 nm | 1~5 mW | |
| MDL-III-1627DFB-SM | 1627 nm | 1~5 mW |
1647nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1647DFB | 1647 nm | 1~5 mW | |
| MDL-III-1647DFB-SM | 1647 nm | 1~5 mW |
1649nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1649DFB | 1649 nm | 1~5 mW | |
| MDL-III-1649DFB-SM | 1649 nm | 1~5 mW |
1650nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1650DFB | 1650 nm | 1~5 mW | |
| MDL-III-1650DFB-SM | 1650 nm | 1~5 mW |
1651nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1651DFB | 1651 nm | 1~10 mW | |
| MDL-III-1651DFB-SM | 1651 nm | 1~5 mW |
1653nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1653DFB | 1653 nm | 1~10 mW | |
| MDL-III-1653DFB-SM | 1653 nm | 1~5 mW |
1654nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1654DFB | 1654 nm | 1~5 mW | |
| MDL-III-1654DFB-SM | 1654 nm | 1~5 mW |
1680nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1680DFB | 1680 nm | 1~5 mW | |
| MDL-III-1680DFB-SM | 1680 nm | 1~5 mW |
1683nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1683DFB | 1683 nm | 1~5 mW | |
| MDL-III-1683DFB-SM | 1683 nm | 1~5 mW |
1710 NM IR Laser, Infrared Diode Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1710 | 1710 nm | 1~500 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | 10000 | 1 year | Datasheet |
Infrared Laser, 1720 NM Infrared Laser Module, Infrared DPSS Lasers.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1720 | 1720 nm | 1~1000 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | 10000 | 1 year | Datasheet |
1834 NM IR Laser, Infrared Diode Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M 2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | TTL/Analog modulation | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-1834 | 1834 nm | 1~1300 mW | <5%, <3% | Near TEM00 | <3.0 | <2.0 | <10 | Air Cooled | 10-35 | PSU-W-LED or PUS-W-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | >10000 | Datasheet |
Infrared Diode Laser AT 1920 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1920 | 1920 nm | 1~500 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Laser AT 2117 NM
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2117 | 2117 nm | 1~2200 mW | <5%, <3% | <6 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | Datasheet |
Infrared Laser AT 2128 NM
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2128 | 2128 nm | 1~1500 mW | <5%, <3% | <6 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | Datasheet |
Infrared Diode Laser AT 2160 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2160 | 2160 nm | 1~400 mW | <1%, <2%, <3% | Multimode | <5. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Diode Laser AT 2180 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2180 | 2180 nm | 1~400 mW | <3%, <2%, <1% | Multimode | <5. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Diode Laser AT 2230 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2230 | 2230 nm | 1~400 mW | <3%, <2%, <1% | Multimode | <5. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Diode Laser AT 2260 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2260 | 2260 nm | 1~400 mW | <2%, <1%, <0.5% | Multimode | <5.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
Infrared Laser, 2600 NM Infrared Laser Module, Infrared DPSS Lasers.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2700 | 2600 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| TUN-W-2600~4410 | 2600 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
2796 NM Infrared Solid State Laser
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2796 | 2796 nm | 10~300 mW | <5%, <3% | Near TEM00 | <8 | <10 | Air Cooled | 15-35 | PSU-H-LED | >10000 | Datasheet |
Infrared Laser, 2800 NM Infrared Laser Module, Infrared DPSS Lasers.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2800 | 2800 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
Infrared Laser, 2830 NM Infrared Laser Module, Infrared DPSS Lasers.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2830 | 2830 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
2910 NM MID Infrared Laser, Solid State Laser, IR Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2910 | 2910 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
2921 NM Infrared Solid State Laser
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2921 | 2921 nm | 10~900 mW | <2%, <1% | Near TEM00 | <4 | <10 | Air Cooled | 15-35 | PSU-H-LED | >10000 | Datasheet |
2940 NM Infrared Laser, Solid State Laser, IR Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2,mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2940 | 2940 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | – | Datasheet |
| TUN-V-2916~3918 | 2940 nm | 1~400 mW | <5%, <3% | <5 | Air Cooled | 15-35 | RAD1PS | >10000 | <6 | Datasheet |
3 ΜM Infrared Laser, CW Laser, Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3000 | 3000 nm | 1~400 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-3000 | 3000 nm | 250~1000 mW | <5%, <3% | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.1 ΜM Infrared Laser, CW Laser, Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3100 | 3100 nm | 1~300 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-3100 | 3100 nm | 250~1000 mW | <5%, <3% | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.2 ΜM Infrared Laser, CW Laser, Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3200 | 3200 nm | 1~300 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-3200 | 3200 nm | 250~1000 mW | <5%, <3% | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.3 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3300 | 3300 nm | 1~400 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3349nm Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3349 | 3349 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3390nm Infrared Laser, CW Laser, Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3390 | 3390 nm | 1~250 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-3390 | 3390 nm | 250~1000 mW | <5%, <3% | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.4 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3400 | 3400 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.6 ΜM Infrared Laser, CW Laser, Solid State Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XN-3600 | 3600 nm | 1~200 mW | <3%, <2%, <1% | Near TEM00 | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | – | Datasheet |
| MIL-V-3600 | 3600 nm | 1~400 mW | – | – | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | <3%, <2% | Datasheet |
| MIL-W-3600 | 3600 nm | 250~1000 mW | – | – | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | <5%, <3% | Datasheet |
3.7 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3700 | 3700 nm | 1~250 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
4.33 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-4330-DFB | 4330 nm | 1~15 mW |
4.56 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-4560-DFB | 4560 nm | 1~15 mW |
4.58 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-4580-DFB | 4580 nm | 1~15 mW |
4.1 ΜM Infrared Laser, CW Laser, Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-4100 | 4100 nm | 1~80 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-4100 | 4100 nm | 50~400 mW | – | – | – | – | – | – | – | Datasheet |
5.24 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-5240-DFB | 5240 nm | 1~15 mW |
5.81 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-5810-DFB | 5810 nm | 1~15 mW |
6.64 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-6640-DFB | 6640 nm | 1~15 mW |
6.79 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-6790-DFB | 6790 nm | 1~15 mW |
7.26 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-7260-DFB | 7260 nm | 1~15 mW |
7.32 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-7320-DFB | 7320 nm | 1~15 mW |
7.4 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-7400-DFB | 7400 nm | 1~15 mW |
7.5 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-7500-DFB | 7500 nm | 1~15 mW |
7.67 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-7670-DFB | 7670 nm | 1~15 mW |
8.2 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-8200 | 8200 nm | 1~1300 mW |
8.6 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-8600 | 8600 nm | 1~1000 mW |
9.26 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-9260-DFB | 9260 nm | 1~15 mW |
9.4μm Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-9400 | 9400 nm | 1~400 mW |
912 NM Infrared Laser.
3 models| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | Pointing stability over temperature (μrad/°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-H-912 | 912 nm | 1~800 mW | TEM00 | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | Datasheet |
| MIL-FN-912 | 912 nm | 800~1000 mW | TEM00 | <1.5 | – | <1.2 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <5%, <3%, <2% | <8 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| PGL-LF-912 | 912 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 937 NM Infrared Diode Lasers, High Power Diode Laser System.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-OEM-937 | 937 nm | 1~50 mW |
Infrared Laser, 968 NM Infrared Diode Lasers, High Power Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-968 | 968 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-968 | 968 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| PGL-LF-968 | 968 nm | 1~10 mW | – | – | – | – | – | – | – | – | – |
Infrared Laser AT 2124 NM
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2124 | 2124 nm | 1~2500 mW | <5%, <3% | <4 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | Datasheet |
860 NM IR Laser, Infrared Diode Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-860 | 860 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-860 | 860 nm | 1~4 W | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-III-860 | 860 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-860 | 860 nm | 1~4 W | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XF-860 | 860 nm | 4~6 W | – | – | – | – | – | – | – | – | – | Datasheet |
870 NM IR Laser, Infrared Diode Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-870L | 870 nm | 1~10 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-870L | 870 nm | 1~10 mW | <2%, <1%, <0.5% | – | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| PGL-LF-870 | 870 nm | 1~10 mW | – | – | – | – | – | – | – | – | – |
3.9 ΜM MID Infrared Laser， Solid State Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Transverse mode | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3900 | 3900 nm | 1~200 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | – | – | Datasheet |
| MDL-XN-3900 | 3900 nm | 1~300 mW | – | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | <3%, <2%, <1% | Near TEM00 | Datasheet |
| MIL-W-3900 | 3900 nm | 50~800 mW | – | – | – | – | – | – | – | – | – | Datasheet |
4 ΜM MID Infrared Laser， Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-4000 | 4000 nm | 50~500 mW | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XN-4000 | 4000 nm | 1~600 mW | <3%, <2%, <1% | Near TEM00 | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | Datasheet |
4.2 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MIL-W-4200 | 4200 nm | 50~200 mW | Datasheet |
4.4 ΜM MID Infrared Laser， Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XN-4400 | 4400 nm | 1~1000 mW | <3%, <2%, <1% | Near TEM00 | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | Datasheet |
| MIL-W-4400 | 4400 nm | 20~100 mW | – | – | – | – | – | – | – | – | Datasheet |
4.6 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XN-4600 | 4600 nm | 1~1500 mW | <3%, <2%, <1% | Near TEM00 | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | Datasheet |
612 NM RED Laser, DPSS Laser, RED Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MRL-U-612-SF | 612 nm | 1~100 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
613 NM RED Laser, DPSS Laser, RED Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MRL-U-613-SF | 613 nm | 1~100 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
637 NM RED Diode Laser |
18 models| Model | Wavelength | Output / average power | Power stability | Optical noise | Output power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | monitoring, | Operating temperature (℃) | Operating voltage (VDC) | Modulation option | Polarization direction | Spectral line width (nm) | Fiber core diameter | Fiber connector | Noise of amplitude (rms, 1~20MHz) | Warranty | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Long Coherence Length | 637 nm | 1-50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TUN-628~637 | 637 nm | Wavelength tunable | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TUN-6 34~643 | 637 nm | Wavelength tunable | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| Low Noise | 637 nm | 1-100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-637 | 637 nm | – | – | – | 1-200 | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-637-SM | 637 nm | 1-100 mW | <0.5% | <1% | – | – | Near TEM00 | – | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| High Stability | 637 nm | 1-100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-FN-637 | 637 nm | 1-180 mW | – | – | – | <2%, <1%, <0.5% | TEM00 | – | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-637 | 637 nm | Integrated electronics | – | – | – | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.2 | <1.0 | <5 | – | – | – | >10000 | inspection | 10-35 | 12V/4A | AMOD (Analog) DC-100kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-637 | 637 nm | 1-200 mW | <0.5% | – | – | – | – | – | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-637 | 637 nm | – | – | – | 1-2000 | <2%, <1%, <0.5% | Multimode | – | – | <2.0×2.0 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | 25±3 | – | – | Horizontal/ Vertical | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL -HD- 637 | 637 nm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| OEM Laser Module | 637 nm | 1-100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-V-FC-637 | 637 nm | Fiber coupled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-FC-637 | 637 nm | Fiber coupled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL Series | 637 nm | Compact laser module | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-D-637 | 637 nm | 1-200 mW | <3%, <2%, <1% | – | – | – | – | – | – | – | <5 | – | – | – | 10000 | – | 20~30 | – | – | – | 0.1 (0.06, optional) | 100µm, 0.22 NA | SMA905 | <1% | 1 year | – | – | – | – | – | – | – | Datasheet |
| PGL-LF-637 | 637 nm | 1-130 mW | – | – | – | – | – | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | Datasheet |
665nm RED Laser, RED Diode Laser |
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Polarization direction | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-665 | 665 nm | 1~800 mW | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | Datasheet |
| MLL-H-665 | 665 nm | 800~2000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | – | – | Datasheet |
| MDL-III-665 | 665 nm | 1~800 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | Datasheet |
| MDL-H-665 | 665 nm | 800~2000 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | – | – | Datasheet |
| MDL-MD-665 | 665 nm | 1~1500 mW | <2%, <1%, <0.5% | – | ~3.1×2.5 / ~2.5×2.5 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Multimode | Horizontal+ Vertical / Horizontal/ Vertical | 25±3 | Datasheet |
| MDL-HD-665 | 665 nm | 1.5~3 W | <2%, <1%, <0.5% | – | ~2.5×2.5 | <5 | – | – | PSU-N-FDA/PSU-N-LED | >10000 | Multimode | Horizontal+ Vertical | 25±3 | Datasheet |
| MDL-XD-665 | 665 nm | 3~4.5 W | <2%, <1%, <0.5% | – | <3.5×4.0 | <5 | – | – | PSU-N-FDA/PSU-N-LED | >10000 | Multimode | Horizontal/ Vertical | 10-35 | Datasheet |
666nm RED Laser, Solid State Laser, DPSS RED Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Polarization Ratio | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-666 | 666 nm | 1~200 mW | TEM00 | >100:1, Vertical (Horizontal Optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | Datasheet |
669nm RED Laser, Solid State Laser, DPSS RED Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization Ratio | Operating Temperature (°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-669 | 669 nm | 1~150 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | Datasheet |
| MDL-III-669 | 669 nm | 1~150 mW | <2%, <1%, <0.5% | – | – | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | Datasheet |
| MRL-FN-669 | 669 nm | 1~200 mW | – | TEM00 | – | – | – | <5 | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | >100:1, Vertical (Horizontal Optional) | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
670 NM RED Laser.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PGL-FP-670 | 670 nm | 1~5 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-670L | 670 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-670-SM | 670 nm | 1~80 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, SMA905 optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Datasheet |
| MLL-FN-670 | 670 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-670L | 670 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-670-SM | 670 nm | 1~80 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Datasheet |
| MRL-DP-670-A | 670 nm | 500~2000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-DP-670-B | 670 nm | 2~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-DP-670-C | 670 nm | 4~6.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-FN-670 | 670 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
678 NM RED Laser, DPSS Laser, RED Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-678 | 678 nm | 1~100 mW | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/PSU-SR | >10000 | Datasheet |
679 NM RED Laser, DPSS Laser, RED Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-679 | 679 nm | 1~500 mW | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/PSU-SR | >10000 | Datasheet |
689 NM Laser, DPSS Laser, RED Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MRL-U-689-SF | 689 nm | 1~200 mW |
698nm Laser, RED Laser, Solid State Laser |
8 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing stability over temperature (μrad/°C) | Cooled method (water cooled) | Polarization ratio | Operating voltage (VDC) | Beam diameter at the aperture (1/e2, mm) | Modulation optional | Power stability (rms, 4 hours±3℃) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Beam divergence, full angle (mrad) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-698 | 698 nm | 1~300 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <10 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-698 | 698 nm | 300~1000 mW | TEM00 | Single | <5MHz | – | <15 | – | – | 20-30 | PSU-W-FDA | >10000 | <8 | WCH-580 | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-698 | 698 nm | 1~1000 mW | TEM00 | – | – | – | <5 | <8 | – | 10-35 | PSU-H-FDA | >10000 | – | – | >100:1, Horizontal (Vertical optional) | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-698 | 698 nm | 1~1200 mW | TEM00 | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/ PSU-H-LED/PSU-SR | >10000 | <8 | – | >100:1, Vertical (Horizontal optional) | – | <1.5 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
| MRL-FN-698-H | 698 nm | 1~1.8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-698-A | 698 nm | 1.8~3 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | – | 10-35 | PSU-DP-A | >10000 | – | – | – | – | <3.0 | – | <3%, <2%, <1% | Air Cooled | – | – | – | Datasheet |
| MRL-DP-698-B | 698 nm | 3~7 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | – | – | – | – | ~3.0 | – | <3%, <2%, <1% | – | WCH-580 | 10-35 | – | Datasheet |
| MRL-DP-698-C | 698 nm | 7~10 W | Multi mode | – | – | – | <10 | – | – | – | – | >10000 | – | – | – | 12V/ 25A | ~3.0 | – | <3%, <2%, <1% | – | WCH-580 | 10-35 | <5.0 | Datasheet |
719 NM RED Laser.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M2 | Polarization Ratio | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-719 | 719 nm | 1~300 mW | <2%, <1%, <0.5% | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | Datasheet |
755 NM RED Laser, RED Diode Laser |
3 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-755 | 755 nm | 1~1000 mW | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | Datasheet |
| MDL-H-755 | 755 nm | 1~1000 mW | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <2%, <1%, <0.5% | Datasheet |
| MDL-XF-755 | 755 nm | 1~3 W | – | – | – | – | – | – | – | – | – | Datasheet |
758 NM RED Laser, RED Diode Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Warm-up time (minutes) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-W-758 | 758 nm | 100~4000 mW | <5%, <3% | TEM00 | <10 | <3 | Air cooled | 15-30 | RAD1PS | >10000 | Datasheet |
760 NM RED Laser, RED Diode Laser |
5 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Single pulse energy (nJ) | Rep. rate (MHz) | Ave power stability (rms, 4 hours±3℃) | pulse | M2 factor | Polarization ratio | Operating temperature (℃) | Frequency doubler | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-760 | 760 nm | 1~3000 mW | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-760 | 760 nm | 1~3000 mW | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <2%, <1%, <0.5% | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-760 | 760 nm | 3~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| CW-760~840 | 760 nm | 1~2000 mW | TEM00 | – | – | <10 | Air cooled | – | 12V/6.67A | >10000 | – | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | <1.2 | >100:1 Vertical | 10-35 | LASER HEAD (780) / POWER SUPPLY | Datasheet |
| CW-760-840 | 760 nm | 1~3000 mW | TEM00 | – | – | <10 | Air cooled | – | 12V/6.67A | >10000 | – | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | <1.2 | >100:1 Vertical | 10-35 | LASER HEAD (780) / POWER SUPPLY | Datasheet |
775nm
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Parameters of customed power supply | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TUN-775~790 | 775 nm | 1~40 mW | <3%, <2%, <1% | Near TEM00 | <1.0 | <5 | 20-30 | PSU-TUN | TEC: 7-12kΩ | >10000 | Datasheet |
244nm Q Switched UV Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| UV-DP-244-B | 244 nm | 1~30 mW |
245nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| UV-DP-245-B | 245 nm | 1~30 mW |
248nm Q Switched UV Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-248-B | 248 nm | 1~50 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
250nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-250-B | 250 nm | 1~50 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
257nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-257-B | 257 nm | 1~150 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
259nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-259-B | 259 nm | 1~150 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
269nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-269-B | 269 nm | 1~300 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
273nm UV CW Ultraviolet Laser.
3 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Modulation option | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Cooled method (Water Cooled) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-FN-273 | 273 nm | 1~5 mW | TEM00 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | DC-1kHz; TTL and Analog optional | >10000 | – | – | – | – | – | – | – | Datasheet |
| UV-DP-273-A | 273 nm | 5~100 mW | Near TEM00 | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | <3%, <2%, <1% | <10 | Air Cooled | 10-35 | PSU-DP-A | – | – | Datasheet |
| UV-DP-273-B | 273 nm | 100~400 mW | Near TEM00 | <3.0 | – | – | – | – | DC-1kHz; TTL and Analog optional | >10000 | – | <10 | – | 10-35 | – | WCH-580 | 12V/ 25A | Datasheet |
275nm UV CW Ultraviolet Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method (Water Cooled) | Modulation option | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-275-A | 275 nm | 1~50 mW | <3%, <2%, <1% | Near TEM00 | <3.0 | <10 | >100:1, Vertical (Horizontal optional) | Air Cooled | 10-35 | PSU-DP-A | >10000 | – | – | – | Datasheet |
| UV-DP-275-B | 275 nm | 50~200 mW | – | Near TEM00 | <3.0 | <10 | – | – | 10-35 | – | >10000 | WCH-580 | DC-1kHz; TTL and Analog optional | 12V/ 25A | Datasheet |
280nm Q Switched UV Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-280-B | 280 nm | 1~20 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
287nm UV Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-287-B | 287 nm | 1~100 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
294nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| UV-DP-294-B | 294 nm | 1~15 mW |
298nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-298-B | 298 nm | 1~30 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
313nm UV CW Ultraviolet Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-313-A | 313 nm | 1~500 mW | <3%, <2%, <1% / <2%, <1%, <0.5% | Near TEM00 | <3.0 | <10 | Air Cooled / WCH-580 (Water Cooled) | 10-35 | PSU-DP-A / / | / / 12V/ 25A | >10000 | Datasheet |
| UV-DP-313-B | 313 nm | 500~4000 mW | <3%, <2%, <1% / <2%, <1%, <0.5% | Near TEM00 | <3.0 | <10 | Air Cooled / WCH-580 (Water Cooled) | 10-35 | PSU-DP-A / / | / / 12V/ 25A | >10000 | Datasheet |
325nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-325-B | 325 nm | 1~1000 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
330nm UV Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-330-B | 330 nm | 1~50 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
335nm UV Laser, Actively Q Switched Ultraviolet Laser
6 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability Over Temperature(urad/℃) | Frequency shift (MHz)(Over±2℃and 8hrs) (optional) | Operating Temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Pointing Stability Over Temperature(μrad/°C) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-335 | 335 nm | 1~10 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <1.5 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-335-LN | 335 nm | 1~10 mW | TEM00 | – | <0.1, <0.003 | <1% | – | – | – | >100:1, Horizontal (Vertical optional) | – | – | 10-35 | PSU-H-FDA | >10000 | <2%, <1% | <10 | <8 | Air Cooled/ Water Cooled | – | – | – | – | Datasheet |
| UV-DP-335-LN | 335 nm | 10~500 mW | Near TEM00 | – | – | <1% | – | <3.0 | – | – | – | – | – | – | >10000 | <2%, <1%, <0.5% | <10 | – | – | WCH-580 | 10-35 | 12V/ 25A | – | Datasheet |
| UV-FN-335 | 335 nm | 1~60 mW | TEM00 | – | – | – | – | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | – | >10000 | – | – | <8 | – | – | – | – | DC-1kHz; TTL and Analog optional | Datasheet |
| UV-DP-335-A | 335 nm | 60~200 mW | Near TEM00 | – | – | – | – | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | PSU-DP-A | >10000 | <3%, <2%, <1% | <10 | – | Air Cooled | – | 10-35 | – | – | Datasheet |
| UV-DP-335-B | 335 nm | 200~1200 mW | Near TEM00 | – | – | – | – | <3.0 | – | – | – | – | – | – | >10000 | – | <10 | – | – | WCH-580 | 10-35 | 12V/ 25A | DC-1kHz; TTL and Analog optional | Datasheet |
340nm UV CW Ultraviolet Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-340-LN | 340 nm | 1~500 mW | <2%, <1%, <0.5% | Near TEM00 | <3.0 | <1% | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | – | Datasheet |
| UV-DP-340-B | 340 nm | 1~1000 mW | – | Near TEM00 | <3.0 | – | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | DC-1kHz; TTL and Analog optional | Datasheet |
364 NM UV Laser.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing Stability Over Temperature(μrad/°C) | Cooled method | Operating Temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-FN-364-LN | 364 nm | 1~90 mW | <1% | TEM00 | 0.75% | <1.2 | 0.5mrad | >100:1, Vertical (Horizontal optional) | <10 | <8 | Air Cooled/ Water Cooled | 10-35 | PSU-H-FDA | >10000 | Datasheet |
365 NM UV Diode Laser.
3 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Modulation option | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Cooled method (Water Cooled) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-FN-365 | 365 nm | 1~100 mW | TEM00 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | DC-1kHz; TTL and Analog optional | >10000 | – | – | – | – | – | – | – | Datasheet |
| UV-DP-365-A | 365 nm | 100~150 mW | Near TEM00 | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | <3%, <2%, <1% | <10 | Air Cooled | 10-35 | PSU-DP-A | – | – | Datasheet |
| UV-DP-365-B | 365 nm | 150~1200 mW | Near TEM00 | <3.0 | – | – | – | – | DC-1kHz; TTL and Analog optional | >10000 | – | <10 | – | 10-35 | – | WCH-580 | 12V/ 25A | Datasheet |
370 NM UV Diode Laser.
1 model380 NM UV Diode Laser.
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-380 | 380 nm | 1~150 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | ~2.0×0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MLL-H-380 | 380 nm | 150~400 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | ~4.0×1.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-III-380 | 380 nm | 1~150 mW | <2%, <1%, <0.5% | Multimode | – | ~2.0×0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-H-380 | 380 nm | 150~400 mW | <2%, <1%, <0.5% | Multimode | – | ~4.0×1.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-MD-380 | 380 nm | 1~1200 mW | <2%, <1%, <0.5% | Multimode | – | ~4.0×1.0 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Horizontal | 25±3 | Datasheet |
| FC-380 | 380 nm | 1~10 W | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-380(FC) | 380 nm | 1~260 mW | – | – | – | – | – | – | – | – | – | – | – |
385 NM UV Diode Laser.
1 model389 NM UV Diode Laser.
1 model302nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-302-B | 302 nm | 1~500 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
304nm UV CW Ultraviolet Laser.
2 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Modulation option | Expected lifetime (hours) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-FN-304 | 304 nm | 1~30 mW | TEM00 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | DC-1kHz; TTL and Analog optional | >10000 | – | – | – | – | Datasheet |
| UV-DP-304-B | 304 nm | 30~500 mW | Near TEM00 | <3.0 | – | – | – | – | DC-1kHz; TTL and Analog optional | >10000 | <10 | WCH-580 | 10-35 | 12V/ 25A | Datasheet |
373nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-373-B | 373 nm | 1~100 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
397 NM UV Diode Laser.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-397L | 397 nm | 1~100 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Datasheet |
| MLL-III-397 | 397 nm | 1~100 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | <0.5×2.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Datasheet |
| MDL-III-397L | 397 nm | 1~100 mW | <2%, <1%, <0.5% | – | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Near TEM00 | Datasheet |
| MDL-III-397 | 397 nm | 1~100 mW | <2%, <1%, <0.5% | – | – | <2.0×0.5 | – | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Datasheet |
| FC-397 | 397 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | |
| MLL-397(FC) | 397 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – |
420nm Violet Blue Laser, Diode Laser, Violet Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-420L | 420 nm | 1~100 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-III-420 | 420 nm | 1~500 mW | <2%, <1%, <0.5% | – | <1%, <0.5% | – | <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-420 | 420 nm | 500~1300 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <2.5×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XS-420 | 420 nm | 1~100 mW | – | Multimode | – | – | <2.5×0.2 | – | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| H-420 | 420 nm | 500~1300 mW | – | – | – | – | – | – | – | – | – | – |
571 NM Yellow Laser, Solid State Laser, Yellow Laser Module |
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MGL-U-571-SF | 571 nm | 1~200 mW | TEM00 | ~3.0 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
577 NM Yellow Laser, Solid State Laser, Yellow Laser Module |
10 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Operating voltage (VDC) | Shock tolerance (6ms) | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Modulation option | Storage temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-577 | 577 nm | 1~300 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-577 | 577 nm | 1~200 mW | TEM00 | – | <0.1, <0.003 | – | <5 | – | – | 10-35 | PSU-H-FDA | >10000 | <3%, <2%, <1% | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | Datasheet |
| MLL-F-577 | 577 nm | 200~300 mW | – | – | <0.1 | – | <5 | – | – | 10-35 | PSU-H-FDA | >10000 | <3%, <2% | – | ~2.0 | – | >100:1, Horizontal (Vertical optional) | – | – | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MGL-S-577 | 577 nm | 1~30 mW | TEM00 | – | – | – | <5 | – | – | – | – | >10000 | – | – | <1.0 | <1.5 | – | – | – | – | 7g laterally, 15g vertically | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-U-577 | 577 nm | 1~500 mW | TEM00 | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <3%, <2%, <1% | – | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <8 | PSU-SR-OEM(12V/25A) | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-F-577 | 577 nm | 500~600 mW | – | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-FN-577 | 577 nm | 600~1200 mW | – | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | <1.5 | >100:1, Horizontal (Vertical optional) | <8 | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-FN-577-A | 577 nm | 1.2~4 W | TEMn1 | – | – | – | – | – | – | 10-35 | – | >10000 | <5%, <3% | <1.5 | – | <10 | >100:1, Horizontal (Vertical optional) | – | – | 100-240V | – | – | – | – | – | – | Datasheet |
| MGL-W-577A | 577 nm | 1.2~5 W | Near TEM00 | – | – | – | <10 | – | – | 10-35 | PSU-W-LED | >10000 | – | – | ~5.0 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | – | – | – | <3%, <2%, (<1% optional) | <1.5 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | Datasheet |
| OEM-S-577-MD | 577 nm | 1~1000 mW | TEMn1 | – | – | – | <10 | – | – | – | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | 0-60 | Datasheet |
585 NM Yellow Laser, Solid State Laser, Yellow Laser Module |
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MGL-U-585-SF | 585 nm | 1~100 mW | TEM00 | ~3.0 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
588nm Yellow Laser, Yellow Orange Solid State Laser, DPSS Laser |
5 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Cooled method (Water cooled) | Power supply (90-264VAC) | Beam divergence (mrad) | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-588 | 588 nm | 1~200 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-W-588 | 588 nm | 200-500 mW | TEM00 | Single | <0.00001 | <1%, <0.5% | <20 | <8 | – | 20-30 | – | >10000 | <3%, <2% | <1.5 | <3.0 | >100:1, Horizontal (Vertical optional) | WCH-580 | PSU-W-FDA | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-588 | 588 nm | 1~200 mW | TEM00 | – | <0.1, <0.003 | – | <5 | – | – | 10-35 | PSU-H-FDA | >10000 | <3%, <2%, <1% | <1.2 | <1.0 | >100:1, Horizontal (Vertical optional) | – | – | <1.5 | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MLL-FN-588 | 588 nm | 200-300 mW | TEM00 | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA | >10000 | <3%, <2%, <1% | – | <1.5 | – | – | – | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MLL-U-588-SM | 588 nm | 1~100 mW | TEM00 (single mode fiber output) | – | – | <1% | <10 | – | – | 10-35 | PSU-H-FDA | >10000 | – | <1.1 | – | – | – | – | – | – | PSU-SR-OEM (12V/25A) | 0.10-0.15 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | Datasheet |
435 NM Blue Violet Laser
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-435 | 435 nm | 1~500 mW | <2%, <1%, <0.5% | <1%, <0.5% | <2.1×1.6 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Datasheet |
| MLL-H-435 | 435 nm | 500~4000 mW | – | – | <2.5×0.2 | – | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Datasheet |
| MDL-III-435 | 435 nm | 1~500 mW | <2%, <1%, <0.5% | <1%, <0.5% | <2.1×1.6 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Datasheet |
| MDL-H-435 | 435 nm | 500~4000 mW | – | – | <2.5×0.2 | – | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Datasheet |
454 NM Blue Violet Diode Laser.
11 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Operating temperature (℃) | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Fiber Jacket | Power stability (rms, 4 hours±3℃) | Operating voltage (VAC) | Power supply (24VDC) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-454L | 454 nm | 1~80 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-454 | 454 nm | 1~800 mW | <2%, <1%, <0.5% | – | <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-454 | 454 nm | 800~2000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | ~2.5×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-454 | 454 nm | 800~2000 mW | <2%, <1%, <0.5% | Multimode | – | – | ~2.5×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-454 | 454 nm | 1~8000 mW | <2%, <1%, <0.5% | Multimode | – | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Horizontal+ Vertical / Horizontal/ Vertical | 25±3 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-454 | 454 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-454 | 454 nm | 8~16 W | – | – | – | – | <2.4×2.0 | <5 | – | – | PSU-N-LED/ PSU-N-FDA | 10000 | Horizontal+Vertical | 10-35 | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | – | – | – | – | – | – | – | – | Datasheet |
| YL-I-455 | 454 nm | 1~40 W | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | – | 0-30 | – | – | – | 100, 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | 100-240 | – | – | Datasheet |
| OEM-BD-455 | 454 nm | 40~50 W | – | – | – | – | ~1.2 | <5 | Air cooled | – | – | >10000 | – | 0-30 | – | – | – | – | – | – | – | <2%, <1% | – | PSU-PNST-OEM (24V/ 14.6A) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional | Datasheet |
| OEM-ED-455 | 454 nm | 50~60 W | – | – | – | – | ~1.2 | <5 | Air cooled | – | – | >10000 | – | 0-30 | – | – | – | – | – | – | – | <2%, <1% | – | PSU-PNST-OEM (24V/ 14.6A) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional | Datasheet |
| OEM-AD-455 | 454 nm | 70~90 W | – | – | – | – | ~1.2 | <5 | Air cooled | – | – | >10000 | – | 0-30 | – | – | – | – | – | – | – | <2%, <1% | – | PSU-PNDT-OEM (24V/ 14.6A) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional | Datasheet |
457 NM Blue Laser.
11 models| Model | Wavelength | Output / average power | Power stability | Optical noise | M² | Output power (W) | Power Stability (rms, 4 hours ± 3°C) | Transverse mode | Spectral linewidth (nm) | Noise of amplitude(rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Cooled method | Power supply (100-240VAC) | Expected lifetime (hours) | Output power (mW) | Power stability (rms, 4 hours , ±3°C) | Beam divergence (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power stability (rms, 4 hours ± 3°C) | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Spectral line width (nm) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-R-457 | 457 nm | Water cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-K-457 | 457 nm | – | – | – | – | 1-5 | <3%, <2%, (<1% optional) | TEM00 | <0. 1 | <1%,(<0. 5% optional) | <1. 1 | ~1.0 | <20 | >50:1(>100:1 optional), Horizontal(Vertical optional) | Water cooled | PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-F-457 | 457 nm | – | – | – | – | – | – | – | – | – | <2.0 | – | – | – | – | – | >10000 | 500-1000 | <5%, <3% | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | Datasheet |
| MBL-K-457 | 457 nm | – | – | – | – | 1 | <5%, <3%, (<2% optional) | TEM00 | <0. 1 | – | <1. 2 | ~1.0 | <20 | >50:1(>100:1 optional), Horizontal (Vertical optional) | Air cooled | PSU-W-LED | >10000 | – | – | – | – | 10-35 | – | – | – | – | – | – | – | Datasheet |
| MBL-K-457-Water | 457 nm | Water cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| Diode laser | 457 nm | 1-80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-457 | 457 nm | – | – | – | – | – | – | Multimode | – | – | – | <2.1×1.6 / <2.5×0.2 | – | – | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | <5 | 10-35 | – | <2%, <1%, <0.5% | – | – | – | – | – | Datasheet |
| MLL-III-457 | 457 nm | 1-1000 mW | – | <0.5% | – | – | – | – | – | – | – | <2.1×1.6 / <2.5×0.2 | – | – | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | <5 | 10-35 | – | <2%, <1%, <0.5% | – | – | – | – | – | Datasheet |
| MBL-U-457 | 457 nm | 1-500 mW | <2%, <1%, <0.5%, <3% | – | <1.5 | – | – | TEM00 | – | – | – | – | – | >100:1, Vertical (Horizontal optional) | – | PSU-H-LED/PSU-H-FDA/PSU-SR | >10000 | – | – | – | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | <1.0 | <8 | PSU-SR-OEM (12V/25A) | – | – | Datasheet |
| MBL-XS-457 | 457 nm | 1-80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-F-457 | 457 nm | 350-1000 mW | <3%, <2%, <1% | – | <2.0 | – | – | – | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | PSU-H-FDA | >10000 | – | – | – | <5 | 10-35 | – | – | – | – | – | <0.1 | PSU-SR-OEM (12V/25A) | Datasheet |
460nm Blue Laser
8 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-460 | 460 nm | 1~50 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | Datasheet |
| MLL-III-460L | 460 nm | 1~80 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | Datasheet |
| MLL-III-460 | 460 nm | 1~800 mW | <2%, <1%, <0.5% | – | <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | Datasheet |
| MLL-F-460 | 460 nm | 800~15000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | ~2.5×0.5 | <5 | – | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | 10-35 | Datasheet |
| MLL-III-460-SM | 460 nm | 1~50 mW | <2%, <1%, <0.5% | – | <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | Datasheet |
| FC-460 | 460 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-460(FC) | 460 nm | 1 mW~14 W | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-460L | 460 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – |
462 NM Blue Violet Diode Laser.
11 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Operating temperature (℃) | Polarization direction | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | Power stability(rms, over 4 hours) | Warm-up time | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-462 | 462 nm | 1~800 mW | <2%, <1%, <0.5% | <1%, <0.5% | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-462 | 462 nm | 800~1500 mW | <2%, <1%, <0.5% | <1%, <0.5% | ~2.5×0.5 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-462 | 462 nm | 1~800 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-462 | 462 nm | 800~1500 mW | – | – | – | – | – | – | PSU-H-LED/ PSU-H-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| F-462-HS | 462 nm | 800~1500 mW | – | – | ~2.5×0.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-462 | 462 nm | 1~6000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Multimode | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-462 | 462 nm | 4~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-462 | 462 nm | 8~16 W | – | – | <2.4×2.0 | <5 | – | – | PSU-N-LED/ PSU-N-FDA | 10000 | – | 10-35 | Horizontal+Vertical | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-462 | 462 nm | 1~2000 mW | – | – | <3×0.5 | – | – | – | – | 10000 | Multimode | – | – | – | – | months / 1 | <5%, <3%, <1% | minutes / <10 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| FC-462 | 462 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-462(FC) | 462 nm | 1~14 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
465 NM Blue Violet Diode Laser.
11 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Operating temperature (℃) | Polarization direction | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-465 | 465 nm | 1~800 mW | <2%, <1%, <0.5% | <1%, <0.5% | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | Datasheet |
| MLL-F-465 | 465 nm | 800~1500 mW | <2%, <1%, <0.5% | <1%, <0.5% | ~2.5×0.5 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | 10-35 | – | – | – | – | Datasheet |
| MDL-III-465 | 465 nm | 1~800 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | – | Datasheet |
| MDL-F-465 | 465 nm | 800~1500 mW | – | – | – | – | – | – | PSU-H-LED/ PSU-H-FDA | – | – | – | – | – | – | – | Datasheet |
| F-465-HS | 465 nm | 800~1500 mW | – | – | ~2.5×0.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | Multimode | – | – | – | – | – | Datasheet |
| MDL-MD-465 | 465 nm | 1~6000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Multimode | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | Datasheet |
| MDL-HD-465 | 465 nm | 4~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-465 | 465 nm | 8~16 W | – | – | <2.4×2.0 | <5 | – | – | PSU-N-LED/ PSU-N-FDA | 10000 | – | 10-35 | Horizontal+Vertical | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
| YL-I-465 | 465 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-465 | 465 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-465(FC) | 465 nm | 1~13500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
480 NM Blue Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | M2 | Beam divergence (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MBL-F-480 | 480 nm | 1~50 mW | <5%, <3% | <2.0 | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
| PGL-FP-480 | 480 nm | 1~20 mW | – | – | – | – | – | – | – |
488 NM Blue Diode Laser.
17 models| Model | Wavelength | Output / average power | Optical noise | Power stability (rms, over 4 hours) | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Cooled method | monitoring, | Operating temperature (℃) | Operating voltage (VDC) | Modulation option | Power stability (rms, 4 hours±3℃) | Polarization ratio | Output power (mW) | Operating voltage(internal PCB) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of internal PCB | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Long Coherent Length | 488 nm | 1-70 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-488L | 488 nm | 1-300 mW | <0.5% | <2%, <1%, <0.5% | Near TEM00 | <2, <1.5 | ~1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-488 | 488 nm | – | – | – | Multimode | – | ~2.5×1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-488 | 488 nm | – | – | – | Multimode | – | ~2.5×1.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-488-SM | 488 nm | – | – | – | Multimode | – | ~2.5×1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-488 | 488 nm | Integrated electronics | – | – | Near TEM00 | <1.2 | <1.0 | <5 | – | – | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | – | inspection | 10-35 | 12V/4A | AMOD (Analog) DC-100kHz | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-488L | 488 nm | – | – | – | – | <2 / <1.5 | ~1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <2%, <1%, <0.5% | – | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-488 | 488 nm | – | – | – | Multimode | – | ~2.5×1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <2%, <1%, <0.5% | – | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-488 | 488 nm | – | – | – | Multimode | – | ~2.5×1.0 | – | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-488 | 488 nm | Economic | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-488 | 488 nm | Economic | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-U-488 -SF | 488 nm | 1-300 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MBL-DF-488 | 488 nm | 300-1000 mW | – | – | – | – | <5 | <10 | – | PSU-AOM (3U) | >10000 | – | – | – | – | 15-30 | – | – | <5%, <3% | >100:1 | – | – | – | – | – | – | – | Datasheet |
| OEM Laser | 488 nm | 1-150 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-F-488 | 488 nm | Controlled by PC, lens optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-FP-488 | 488 nm | Fiber coupled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-488 | 488 nm | – | – | – | Near TEM00 | – | <1 | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | 1-50 | 6VDC | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90%, non-condensing | mm2 / Φ12×50 | Datasheet |
491 NM Blue Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MBL-U-491-SF | 491 nm | 1~400 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
510 NM Green Diode Laser.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| III-510 | 510 nm | 1~50 mW | – | – | – | – | – | – | – | – | |
| MDL-III-510 | 510 nm | 1~50 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-XS-510 | 510 nm | 1~50 mW | – | – | – | – | – | – | – | – | |
| FC-510 | 510 nm | 1~500 mW | – | – | – | – | – | – | – | – | |
| MGL-510(FC) | 510 nm | 1~25 mW | – | – | – | – | – | – | – | – | |
| MLL-III-510 | 510 nm | 1~50 mW | – | – | – | – | – | – | – | – |
Green Laser, 514.5 NM Laser, Argon Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MXL-515 | 514.5 nm | 1~500 mW |
522nm Green Laser
9 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms,20Hz-20MHz) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability over temperature (urad /°C) | Frequency shift (MHz)(over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing stability over temperature (μrad/°C) | Warm-up time (minutes) | Cooled method (water cooled) | Power stability (rms, 4 hours ± 3°C) | Operating temperature (℃) | Parameters of customed power supply | Modulation optional | Power stability (rms, 4 hours±3℃) | M2 | Fiber connector | Fiber jacket | Fiber length | Operating Temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-522 | 522 nm | 1~150 mW | <3%, <2%, <1% | TEM00 | Single | <1MHz | <1%, <0.5% | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-522 | 522 nm | 150~500 mW | – | TEM00 | Single | <5MHz | – | – | – | – | – | 20-30 | PSU-W-FDA | >10000 | <8 | <15 | WCH-580 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TUN-518-522 | 522 nm | 1~30 mW | – | – | – | <0.1 | – | <1.0 | – | – | – | – | PSU-TUN | >10000 | – | <5 | – | <3%, <2%, <1% | 20-30 | TEC: 7-12kΩ | – | – | – | – | – | – | – | Datasheet |
| FN-522 | 522 nm | 1~400 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-FN-522 | 522 nm | 1~800 mW | – | TEM00 | – | – | – | <1.5 | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | <5 | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | Datasheet |
| MGL-FN-522-SM | 522 nm | 1~300 mW | – | TEM00 | – | – | – | – | – | – | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | <10 | – | – | – | – | – | <3%, <2%, <1% | <1.2 | FC/APC | PVC | 1m | 10-35 | Datasheet |
| MGL-DP-522-A | 522 nm | 800~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-DP-522-B | 522 nm | 1.5~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-DP-522-C | 522 nm | 3~7 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
561 NM Yellow Green Laser.
12 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (μrad/°C) | Shock tolerance (6ms) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-XS-561 | 561 nm | 1~80 mW | <2%, <1% | TEM00 | <1%, (<0.5%,0.25% optional) | <1.2 | <1.0 | >100:1, (Vertical ± 5 degree) | <5 | 10-35 | 12V/6.67A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-S-561 | 561 nm | 1~80 mW | – | TEM00 | – | <1.2 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | – | >10000 | <0.1 | <1.0 | <8 | 7g laterally, 15g vertically | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-561 | 561 nm | 80~200 mW | – | TEM00 | – | – | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | – | – | >10000 | <0.1, <0.003 | <1.0 | <8 | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MLL-FN-561 | 561 nm | 200~400 mW | <3%, <2%, <1% | TEM00 | – | – | – | – | <5 | – | – | >10000 | – | <1.5 | <8 | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MLL-U-561-SM | 561 nm | 1~40 mW | – | TEM00 (single mode fiber output) | <1% | <1.1 | – | – | <10 | – | – | >10000 | – | – | – | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | 0.10-0.15 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | Datasheet |
| MGL-FN-561 | 561 nm | 300~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-FN-561-AOM | 561 nm | 1~600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-S-561 | 561 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-U-561 | 561 nm | 80~300 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-W-561A | 561 nm | 1~2 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-H1-561 | 561 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-561 | 561 nm | 1~5 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
High Power Laser |
2 models| Model | Wavelength | Output / average power | Ave power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (220-240AC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| HPL-1064-CW | 1064 nm | 50-100 W | – | – | – | – | – | – | – | Datasheet |
| HPL-1319-CW | 1319 nm | 20-50 W | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-CW | >10000 | Datasheet |
Infrared Laser, 1047 NM Infrared Laser Module, Infrared DPSS Lasers.
6 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Power supply (12VDC) | Spectral line width (nm) | Power stability (rms, 4 hours , ±3°C) | Power stability (rms, over 4 hours) | Warm-up time(minutes) | M2 factor | Pointing stability after warm-up(mrad) | Cooled method | Operating temperature (℃) | Power supply (90-264VAC) | Warranty period | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-U-1047-SU | 1047 nm | 1~500 mW | TEM00 | Single | <1MHz | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-1047-SU | 1047 nm | 1~1000 mW | TEM00 | – | – | <1.5 | – | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | <1% | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1047 | 1047 nm | 1~1000 mW | TEM00 | – | – | <1.5 | – | <2.0 | – | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | <1% | PSU-SR-OEM (12V/25A) | <0.1 | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-H-1047 | 1047 nm | 1~1000 mW | TEM00 | – | – | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-U-1047-SU | 1047 nm | 1~4 W | TEM00 | – | – | <1.5 | ~1.0 | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | <3%, <2%, <1% | – | – | – | – | – | – | – | – | Datasheet |
| MIL-V-1047 | 1047 nm | 4~8 W | Near TEM00 | – | – | – | – | – | >100:1 | – | – | – | – | – | – | 10000 | – | – | – | – | <1%, <2%,<3% | <10 | <2.0 | <0.05 | Air cooled | 10~35 | PSU-AOM (3U) | 1 year | Datasheet |
Infrared Laser, 1053 NM Infrared Laser Module, Infrared DPSS Lasers.
2 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam divergence (mrad) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1053-SU | 1053 nm | 1~1500 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | Datasheet |
| MLL-H-1053 | 1053 nm | 1~1500 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <0.1 | <2.0 | Datasheet |
Infrared Laser, 1085 NM Infrared Laser Module,infrared Lasers.
2 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1085-SU | 1085 nm | 1~1000 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | Datasheet |
| MIL-U-1085-SU | 1085 nm | 1~1000 mW | TEM00 | – | <1.5 | – | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | ~1.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
Infrared Laser, 1112 NM Infrared Laser Module,infrared Lasers.
5 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (MHz) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad /°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Power supply (12VDC) | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Pointing Stability Over Temperature (urad/°C) | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-U-1112-SU | 1112 nm | 1~200 mW | TEM00 | Single | <1MHz | <1% | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | Datasheet |
| MLL-U-1112-SU | 1112 nm | 1~100 mW | TEM00 | – | – | <1% | <1.5 | – | – | – | <5 | – | – | 10~35 | PSU-H-FDA | – | >10000 | PSU-SR-OEM (12V/25A) | – | – | – | – | Datasheet |
| MIL-H-1112 | 1112 nm | 1~500 mW | TEM00 | – | – | – | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MIL-U-1112-SU | 1112 nm | 500~2000 mW | TEM00 | – | – | – | <1.5 | ~1.0 | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MIL-T-1112 | 1112 nm | 1200~7000 mW | TEM00 | – | – | – | <1.5 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | – | – | 10-35 | PSU-W-FDA/PSU-W-LED | – | >10000 | – | – | <3%, <2%, (<1% optional) | <20 | Air cooled | Datasheet |
Infrared Laser, 1122 NM Infrared Laser Module,infrared Lasers.
4 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (MHz) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad /°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Power supply (12VDC) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-U-1122-SU | 1122 nm | 1~250 mW | TEM00 | Single | <1MHz | <1% | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | Datasheet |
| MLL-U-1122-SU | 1122 nm | 1~300 mW | TEM00 | – | – | <1% | <1.5 | – | – | – | <5 | – | – | 10~35 | PSU-H-FDA | – | >10000 | PSU-SR-OEM (12V/25A) | – | Datasheet |
| MIL-H-1122 | 1122 nm | 1~1000 mW | TEM00 | – | – | – | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MIL-U-1122-SU | 1122 nm | 1000~1200 mW | TEM00 | – | – | – | <1.5 | ~1.0 | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
Infrared Laser, 1177 NM Infrared Laser Module,infrared Lasers.
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-H-1177 | 1177 nm | 1~400 mW | TEM00 | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
Infrared Laser,1342 NM DPSS Infrared Laser, Infrared Laser Pointer.
8 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (MHz) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad /°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Pointing stability over temperature (μrad/°C) | Cooled method (water cooled) | Power supply (90-264VAC) | Power supply (12VDC) | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-U-1342-SU | 1342 nm | 1~500 mW | TEM00 | Single | <1MHz | <1% | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-1342 | 1342 nm | 500~5000 mW | TEM00 | Single | – | <0.5% | <1.3 | ~1.5 | – | >100:1, Vertical (Horizontal optional) | – | – | – | 20-30 | – | – | >10000 | <3%, <2%, <1% | <5MHz | <8 | WCH-580 | PSU-W-FDA | – | – | – | – | – | Datasheet |
| MLL-U-1342-SU | 1342 nm | 1~2000 mW | TEM00 | – | – | <1% | <1.2 | ~1.5 | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | – | – | – | – | – | PSU-SR-OEM (12V/25A) | – | – | – | – | Datasheet |
| MLL-H-1342 | 1342 nm | 1~2000 mW | TEM00 | – | – | <1% | <1.5 | – | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | – | <0.1 | – | – | – | PSU-SR-OEM (12V/25A) | – | – | – | – | Datasheet |
| MIL-H-1342 | 1342 nm | 1~2000 mW | TEM00 | – | – | – | <1.5 | – | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MIL-U-1342-SU | 1342 nm | 2~3 W | TEM00 | – | – | – | <1.5 | ~1.0 | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MIL-N-1342 | 1342 nm | 3~4 W | Near TEM00 | – | – | – | 3-6 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-V-1342 | 1342 nm | 1~6 W | TEM00 | – | – | – | ＜1.3 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | – | – | 10-35 | PSU-W-LED | – | >10000 | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | <3.0 | <20 | Datasheet |
Infrared Laser, 1413 NM Infrared Laser Module, DPSS Infrared Lasers.
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-H-1413 | 1413 nm | 1~300 mW | TEM00 | <1.5 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
Infrared Laser, 1444 NM Infrared Laser Module, DPSS Infrared Lasers.
2 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1444-SU | 1444 nm | 1~400 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | Datasheet |
| MIL-U-1444-SU | 1444 nm | 1~400 mW | TEM00 | – | <1.5 | – | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | ~1.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
Infrared Laser,1450 NM Infrared Diode Lasers,infrared Diode Laser System.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | M2 after fiber | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1450 | 1450 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MLL-III-1450-SM | 1450 nm | 1~15 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | Datasheet |
Infrared Laser,1470 NM Infrared Diode Lasers,infrared Diode Laser System.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Power stability (rms, over 4 hours) | M2 factor | Spectral linewidth (MHz) | Beam divergence, full angle (mrad) | Operating temperature (℃) | Power supply (85-264VAC) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-1470 | 1470 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-H-1470 | 1470 nm | 500~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1470 | 1470 nm | 1~500 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1470DFB-SM | 1470 nm | 1~15 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1470R | 1470 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1470-SM | 1470 nm | 1~15 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1470 | 1470 nm | 500~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-1470 | 1470 nm | 1~500 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1470-SM | 1470 nm | 1~15 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1470DFB | 1470 nm | 1~20 mW | – | – | – | – | – | – | – | <5 | – | – | – | 10000 | – | <3%, <2%, <1%, <0.5% | <1.1 | ~3 | <1.5 | 25+/-3 | PSU-III-LED / PSU-III-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
Infrared Laser,1532 NM Infrared Diode Lasers, Infrared Fiber Coupled Laser System.
3 models| Model | Wavelength | Output / average power | Spectral line width (nm) | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber | M2 after fiber | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1532 | 1532 nm | 1~800 mW | <0.5 | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MLL-III-1532-SM | 1532 nm | 1~15 mW | – | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | 1m | ~1.1 | Datasheet |
| FC-OEM-1532 | 1532 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1550 NM Infrared Diode Lasers, Infrared Laser System.
19 models| Model | Wavelength | Output / average power | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Operating temperature (°C) | Storage temperature (°C) | Humidity (%) | Weight (g) | Transverse mode | Beam divergence, full angle (mrad) | Expected lifetime (hours) | Warranty (years) | Operating voltage(internal PCB) | Operating temperature | Storage temperature | Humidity | Power stability(rms, over 4 hours) | Warm-up time | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Dimensions of laser head | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | M2 after fiber | Warm-up time (minutes) | Cooled method | Power supply (100-240VAC) | Noise of amplitude (rms, 20Hz-20MHz) | Spectral line width (MHz) | M2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-1550 | 1550 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-1550 | 1550 nm | 1~10 mW | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -10°C to +45°C | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-FP-1550 | 1550 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-1550 | 1550 nm | 1~15 mW | – | – | – | Cable with flying leads | – | – | – | – | Near TEM00 | <3 | 10000 | 1 | 3VDC (TTL10kHz, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-FC-1550 | 1550 nm | 1~500 mW | – | – | – | 9 pin connector | – | – | – | – | Multimode | <10 | 10000 | 1 | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-1550 | 1550 nm | 1~2000 mW | – | – | – | 9 pin connector | – | – | – | – | Multimode | <10 | 10000 | 1 | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1550 | 1550 nm | 600~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1550 | 1550 nm | 1~600 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | Datasheet |
| MDL-III-1550DFB-SM | 1550 nm | 1~180 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | Datasheet |
| MDL-III-1550L | 1550 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1550R | 1550 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1550-SM | 1550 nm | 1~180 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | Datasheet |
| MDL-N-1550 | 1550 nm | 1~3.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-W-1550 | 1550 nm | 100~2000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-H-1550 | 1550 nm | 600~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-1550 | 1550 nm | 1~600 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | <1%, <0.5% | – | – | Datasheet |
| MLL-III-1550L | 1550 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-1550-SM | 1550 nm | 1~180 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | <1%, <0.5% | – | – | Datasheet |
| TEM-F-1550DFB | 1550 nm | 1~50 mW | – | – | – | – | 25±3 | – | – | – | TEM00 | <1.5 | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | – | – | – | – | – | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | ~3 | <1.1 | Datasheet |
1645 NM Infrared Solid State Laser
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-N-1645 | 1645 nm | 1~1000 mW | <5%, <3% | Near TEM00 | <3 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
Infrared Diode Laser AT 1910 NM.
3 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1910 | 1910 nm | 1~500 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | – | – | Datasheet |
| MIL-N-1910 | 1910 nm | 1~2000 mW | – | Near TEM00 | <2 | <10 | 15-30 | PSU-H-LED or PSU-H-FDA | – | >10000 | – | <2%, <1% | Air Cooled | Datasheet |
| MIL-W-1910 | 1910 nm | 1~13 W | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser AT 1985 NM.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-N-1990 | 1985 nm | 1~2000 mW | <2%, <1% | Near TEM00 | <2 | <10 | Air Cooled | 15-30 | PSU-H-LED or PSU-H-FDA | >10000 | Datasheet |
| MIL-W-1990 | 1985 nm | 1~11 W | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser AT 2000 NM.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2000 | 2000 nm | 1~300 mW | <2%, <1%, <0.5% | Multimode | <5.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | Datasheet |
| MDL-XF-2000 | 2000 nm | 300~1000 mW | – | Multimode | <5.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | 10-35 | Datasheet |
Infrared Laser AT 2096 NM
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2096 | 2096 nm | 1~2500 mW | <5%, <3% | <6 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | Datasheet |
Infrared Diode Laser AT 2200 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2200 | 2200 nm | 1~400 mW | <3%, <2%, <1% | Multimode | <5. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Diode Laser AT 3800 NM.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3800 | 3800 nm | 1~250 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-3800 | 3800 nm | 250~2800 mW | – | – | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
Infrared Diode Laser, 793 NM Infrared Diode Lasers, High Power Diode Laser System.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Fiber Jacket | Power stability (rms, 4 hours±3℃) | Operating temperature (℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-793 | 793 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | Datasheet |
| MDL-III-793 | 793 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | Datasheet |
| MDL-H-793 | 793 nm | 2500~4000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | Datasheet |
| OEM-I-793-BG | 793 nm | 200 W | – | – | – | – | <5 | Air cooled | – | – | >10000 | 200, 0.22NA | SMA905 | 4m | PVC, Metal optional | <2%, <1%, <0.5% | -30-60 | 100-240 | Datasheet |
| FC-793 | 793 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-793(FC) | 793 nm | 1~3600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Diode Laser, 825 NM Infrared Diode Lasers.
7 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Operating temperature (℃) | Parameters of customed power supply | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-825 | 825 nm | 1~2500 mW | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | Datasheet |
| MDL-H-825 | 825 nm | 1~2500 mW | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <2%, <1%, <0.5% | – | – | Datasheet |
| TUN-822~837 | 825 nm | 1~40 mW | Near TEM00 | – | <1.0 | <5 | – | – | PSU-TUN | >10000 | <3%, <2%, <1% | 20-30 | TEC: 7-12kΩ | Datasheet |
| FC-825 | 825 nm | 1 mW~5 W | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-825(FC) | 825 nm | 1 mW~2 W | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-825 | 825 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-825 | 825 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 845 NM Infrared Diode Lasers.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-845L | 845 nm | 1~30 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
Infrared Diode Laser, 880 NM Infrared Diode Lasers.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-880L | 880 nm | 1~5 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-III-880 | 880 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-880 | 880 nm | 1~2 W | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-880-SM | 880 nm | 1~2 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| TEM-LN-880 | 880 nm | 1~2 mW | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 885 NM Infrared Diode Lasers.
8 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-885L | 885 nm | 1~5 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-III-885 | 885 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-885 | 885 nm | 1~2 W | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-885L | 885 nm | 1~5 mW | <2%, <1%, <0.5% | – | – | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-885 | 885 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-885 | 885 nm | 1~2 W | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| PGL-V-H-FC-885 | 885 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-885 | 885 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 905 NM Infrared Diode Pulse Lasers, High Power Diode Laser System.
12 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Operating voltage(internal PCB) | Operating temperature | Storage temperature | Humidity | Dimensions of internal PCB | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-905 | 905 nm | 1~60 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-905L | 905 nm | 1~70 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | – | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-905 | 905 nm | 1~400 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-905-SM | 905 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-905 | 905 nm | 1~60 mW | <2%, <1%, <0.5% | TEM00 | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-905L | 905 nm | 1~70 mW | <2%, <1%, <0.5% | Near TEM00 | – | – | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-905 | 905 nm | 1~400 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-905-SM | 905 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-P-905 | 905 nm | >130 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-LF-905 | 905 nm | 1~10 mW | – | – | – | – | – | – | -10°C to +45°C | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | Datasheet |
| PGL-FP-905 | 905 nm | 1~70 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-905 | 905 nm | 1~100 mW | – | Near TEM00 | – | – | <1 | – | – | – | 10000 | – | – | – | – | Cable with flying leads | – | – | – | 3VDC | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | mm2 / Φ12×50 | Datasheet |
914 NM Infrared Laser.
5 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Power supply (12VDC) | Spectral line width (nm) | Power stability (rms, 4 hours , ±3°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-U-914-SU | 914 nm | 1~100 mW | TEM00 | Single | <1MHz | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | Datasheet |
| MLL-U-914-SU | 914 nm | 1~400 mW | TEM00 | – | – | <1.2 | ~1.5 | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | <1% | PSU-SR-OEM (12V/25A) | – | – | Datasheet |
| MLL-H-914 | 914 nm | 400~800 mW | TEM00 | – | – | <1.5 | – | <2.0 | – | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | <1% | PSU-SR-OEM (12V/25A) | <0.1 | – | Datasheet |
| MIL-H-914 | 914 nm | 1~800 mW | TEM00 | – | – | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | Datasheet |
| MIL-U-914-SU | 914 nm | 800~1700 mW | TEM00 | – | – | <1.5 | ~1.0 | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | <3%, <2%, <1% | Datasheet |
Infrared Laser, 946 NM Infrared Laser Module, DPSS Infrared Lasers.
5 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam divergence (mrad) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Power stability (rms, 4 hours , ±3°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-946-SU | 946 nm | 1~300 mW | TEM00 | <1% | <1.5 | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | Datasheet |
| MLL-H-946 | 946 nm | 300~800 mW | TEM00 | <1% | <1.5 | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <0.1 | <2.0 | – | – | – | Datasheet |
| MIL-H-946 | 946 nm | 1~800 mW | TEM00 | – | <1.5 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | <2.0 | ~1.2 | >100:1, Horizontal (Vertical optional) | – | Datasheet |
| MIL-U-946-SU | 946 nm | 800~1500 mW | TEM00 | – | <1.5 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | ~1.0 | – | <3%, <2% | Datasheet |
| MIL-W-946 | 946 nm | 1.5~5 W | TEM00 | – | <1.5 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | <2.0 | ~1.2 | >100:1, Horizontal (Vertical optional) | – | Datasheet |
604 NM Orange Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-604 | 604 nm | 1~100 mW | TEM00 | <1.2 | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
607 NM RED Laser.
10 models| Model | Wavelength | Output / average power | Transverse mode | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Pointing stability after warm-up (mrad) | Operating Temperature (°C) | Modulation optional | Power stability (rms, over 4 hours) | M2 factor | Power supply (90-264VAC) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Fiber connector | Fiber jacket | Fiber length | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-607 | 607 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-607 | 607 nm | 200~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-607 | 607 nm | 1~600 mW | TEM00 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-U-607-SU | 607 nm | 1~500 mW | TEM00 | >100:1, Vertical (Horizontal optional) | <5 | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | – | >10000 | <2%, <1%, <0.5% | <1.2 | <1.0 | <1.5 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-607 | 607 nm | 500~800 mW | TEM00 | – | <5 | – | – | – | – | >10000 | – | – | – | <1.5 | <0.05 | 10-35 | DC-30kHz; TTL and Analog modulation optional | <2%, <1%, 0.5% | <1.2 | PSU-H-LED/PSU-H-FDA/PSU-SR | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-607-H | 607 nm | 800~1800 mW | TEM00 | – | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | <1.2 | – | <1.5 | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-607-A | 607 nm | 1.8~2 W | Near TEM00 (TEM00 optional) | – | <10 | – | 10-35 | PSU-DP-A | – | >10000 | <3%, <2%, <1% | – | <3.0 | – | – | – | – | – | – | – | Air Cooled | – | – | – | – | – | – | Datasheet |
| MRL-DP-607-B | 607 nm | 2~3.5 W | Near TEM00 (TEM00 optional) | – | <10 | – | – | PSU-W-FDA/ PSU-W-LED | – | >10000 | <3%, <2%, <1% | – | ~3.0 | – | – | – | – | – | – | – | – | WCH-580 | 10-35 | – | – | – | – | Datasheet |
| MRL-DP-607-C | 607 nm | 3.5~7.5 W | Multi mode | – | <10 | – | – | – | 12V/ 25A | >10000 | <3%, <2%, <1% | – | ~3.0 | <5.0 | – | – | – | – | – | – | – | WCH-580 | 10-35 | – | – | – | – | Datasheet |
| MRL-FN-607-SM | 607 nm | 1~1000 mW | TEM00 | – | <10 | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | – | >10000 | <3%, <2%, <1% | <1.2 | – | – | – | 10-35 | – | – | – | – | – | – | – | FC/APC | PVC | 1m | DC-1kHz; TTL and Analog optional | Datasheet |
622 NM RED Diode Laser.
3 models| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Beam diameter at the aperture (1/e2, mm) | Cooled method (Water Cooled) | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-622 | 622 nm | 1~50 mW | TEM00 | <1.2 | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | Datasheet |
| MRL-DP-622-B | 622 nm | 50~100 mW | Near TEM00 (TEM00 optional) | – | – | <10 | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | <3%, <2%, <1% | ~3.0 | WCH-580 | 10-35 | Datasheet |
| MDL-H-622 | 622 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – |
627 NM RED Diode Laser.
2 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Operating temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-U-627-SF | 627 nm | 1~200 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | – | – | – | Datasheet |
| MDL-III-627 | 627 nm | 1~300 mW | Multimode | – | – | Conduction | <5 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <2%, <1%, <0.5% | <3.0×0.5 | 10-35 | Datasheet |
635 NM RED Diode Laser.
21 models| Model | Wavelength | Output / average power | Spectral line width (nm) | Power stability (rms, 4 hours ± 3°C) | Fiber | linewidth, short coherent length, long | Transverse mode | M2 after fiber | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-E-635 | 635 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | |
| FC-D-635 | 635 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-HD-635 | 635 nm | 1.5~3 W | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-635 | 635 nm | 1~1000 mW | ~5 | <2%, <1%, <0.5% | 1m | Fiber jacket / Metal, PVC optional | TEM00 | ~1.1 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-635L | 635 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-635R | 635 nm | 1~150 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-635-SM | 635 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-MD-635 | 635 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-635 | 635 nm | 3~8 W | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-635 | 635 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-635L | 635 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-D12-635 | 635 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-D8-635 | 635 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-FP-635 | 635 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-FS-635 | 635 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-H-635 | 635 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-635 | 635 nm | 1~130 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-V-H-635 | 635 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-V-H-FC-635 | 635 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-635 | 635 nm | 1~120 mW | – | – | – | – | – | – | – | – | – | – | |
| TEM-FN-635 | 635 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – |
671 NM RED Laser.
12 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | Power Stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | measurement, holography, laser printing, chip | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | Polarization ratio (optional) | Fiber core diameter | Fiber Jacket | Cooled method | Modulation option | Beam diameter at the aperture( 1/e2, mm) | Shock tolerance (6ms) | Modulation optional | Power stability (rms, 4 hours±3°C) | Power supply (90-264VAC) | Operating voltage(VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-671 | 671 nm | 1~500 mW | <3%, <2%, <1% | <0.1, <0.003 | TEM00 | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-671 | 671 nm | 500~1000 mW | – | – | TEM00 | – | – | – | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | PSU-H-FDA | – | >10000 | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-671 | 671 nm | 1~1.5 W | <3%, <2%, <1% | <0.1 | – | – | ~3.0 | – | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | PSU-H-FDA | – | >10000 | – | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-V-671 | 671 nm | 1.5~5 W | – | – | TEM00 | <1.3 | – | – | >50:1(>100:1 optional),Vertical(Horizontal optional) | <10 | – | 10-35 | PSU-W-LED | – | >10000 | – | – | <3%, <2%, (<1% optional) | <1% | <1.5 | <20 | Cooled method / Water Cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-671-SM | 671 nm | 1~250 mW | – | – | TEM00 (single mode fiber output) | <1.1 | – | – | – | <10 | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | <1% | – | – | – | 0.10-0.15 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-V-671-SM | 671 nm | 250~3000 mW | – | – | TEM00 (single mode fiber output) | <1.1 | – | – | – | <10 | – | 10-30 | PSU-W-LED | – | ＞10000 | – | – | <3%, <2%, (<1% optional) | <1% | – | – | – | – | SM fiber (PM fiber optional) | FC/APC | – | 1m | – | >50:1 after PM fiber | 4um,0.10NA | PVC, Metal optional | Air Cooled (Water Cooled optional) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | Datasheet |
| MRL-S-671 | 671 nm | 1~200 mW | – | – | TEM00 | <1.2 | – | – | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | PSU-A-F/PSU-A-D | – | >10000 | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | <1.0 | 7g laterally, 15g vertically | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MRL-U-671 | 671 nm | 200~500 mW | <2%, <1%, <0.5% / <3%, <2% | – | TEM00 | <1.2 | – | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | – | 10-35 | PSU-H-LED/PSU-H-FDA/PSU-SR | – | >10000 | <8 | PSU-SR-OEM(12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-671 | 671 nm | 500~1000 mW | – | – | TEM00 | – | <1.5 | – | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | PSU-H-FDA/ PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MRL-V-671 | 671 nm | 1~5 W | – | – | TEM00 | <2.0 | – | – | >50:1(>100:1 optional), Vertical(Horizontal optional) | <10 | – | 10-35 | PSU-W-LED | – | >10000 | – | – | <3%, <2%, (<1% optional) | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-S-671-SM | 671 nm | 1~100 mW | – | – | TEM00 (single mode fiber output) | – | – | – | – | <10 | – | 10-35 | – | – | >10000 | – | – | – | – | – | – | – | 0.10-0.12 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | – | >50:1 after PM fiber | – | – | – | – | – | – | – | – | <3%, <2%, <1% / <3%, <2% | PSU-III-LED/ PSU-III-FDA | PSU-A-F-OEM (5V/5A) | Datasheet |
| MRL-V-671-SM | 671 nm | 100~3000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
680 NM RED Diode Laser.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-680 | 680 nm | 1~1500 mW | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-III-680-SM | 680 nm | 1~20 mW | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| FC-680 | 680 nm | 1~2 W | – | – | – | – | – | – | – | – | |
| MRL-680(FC) | 680 nm | 1~800 mW | – | – | – | – | – | – | – | – |
685 NM RED Diode Laser.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-685 | 685 nm | 1~20 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| MLL-III-685L | 685 nm | 1~50 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Datasheet |
| MLL-III-685-SM | 685 nm | 1~20 mW | – | – | – | – | – | – | – | – | – | – |
690 NM RED Diode Laser.
9 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-D-690 | 690 nm | 1~450 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-690L | 690 nm | 1~250 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-690 | 690 nm | 1~1300 mW | <2%, <1%, <0.5% | – | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-690R | 690 nm | 1~200 mW | <3%, <2%, <1% | Round | – | – | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-690L | 690 nm | 1~250 mW | <2%, <1%, <0.5% | – | – | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-690 | 690 nm | 1~1300 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-690 | 690 nm | 1~1000 mW | – | Multimode | – | – | <6 | – | – | – | – | 10000 | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| FC-690 | 690 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-690(FC) | 690 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
705 NM RED Diode Laser.
3 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-C-705 | 705 nm | 1~10 mW | |
| FC-705 | 705 nm | 1~500 mW | |
| MDL-705(FC) | 705 nm | 1~20 mW |
721 NM RED Laser.
10 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Pointing stability over temperature (μrad/°C) | Cooled method (water cooled) | Power supply (90-264VAC) | Polarization Ratio | Operating voltage (VDC) | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Pointing stability after warm-up (mrad) | Operating Temperature (°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-721 | 721 nm | 1~300 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <10 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-721 | 721 nm | 300~1000 mW | TEM00 | Single | <5MHz | <0.5% | – | – | – | 20-30 | – | >10000 | <3%, <2%, <1% | <1.3 | ~1.5 | >100:1, Vertical (Horizontal optional) | <8 | WCH-580 | PSU-W-FDA | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-721 | 721 nm | 1~800 mW | TEM00 | – | – | <1%, <0.5% | <5 | – | – | 10-35 | PSU-H-FDA | >10000 | <2%, <1%, <0.5% | <1.2 | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | PSU-SR-OEM(12V/25A) | – | – | – | – | – | Datasheet |
| MRL-U-721-SU | 721 nm | 1~800 mW | TEM00 | – | – | – | <5 | – | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | <1.2 | <1.0 | >100:1, Vertical (Horizontal optional) | – | – | – | – | – | <2%, <1%, <0.5% | <1.5 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-FN-721 | 721 nm | 800~1000 mW | TEM00 | – | – | – | <5 | – | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | <1.5 | – | – | – | – | – | >100:1, Vertical (Horizontal optional) | – | <2%, <1%, <0.5% | – | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-FN-721-H | 721 nm | 1~2 W | TEM00 | – | – | – | <5 | – | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | <1.5 | – | – | – | – | – | >100:1, Vertical (Horizontal optional) | – | <2%, <1%, <0.5% | – | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-DP-721-A | 721 nm | 1~3.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-DP-721-B | 721 nm | 3.5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-DP-721-C | 721 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-FN-721-SM | 721 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
729 NM RED Laser.
3 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| CW-729 | 729 nm | 1~2000 mW | |
| MRL-FN-729 | 729 nm | 1~500 mW | |
| MRL-FN-729-H | 729 nm | 500~1000 mW |
747 NM RED Laser.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M2 | Polarization Ratio | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Cooled method (Water Cooled) | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-747 | 747 nm | 1~500 mW | <3%, <2%, <1% | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | Datasheet |
| MRL-FN-747-H | 747 nm | 500-1000 mW | <3%, <2%, <1% | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | Datasheet |
| MRL-DP-747-B | 747 nm | 1~2 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | – | – | <10 | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | ~3.0 | WCH-580 | 10-35 | Datasheet |
Infrared Laser,750 NM Infrared Diode Lasers,infrared Diode Laser System.
9 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-750 | 750 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-750 | 750 nm | 2~5 W | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-750-SLD | 750 nm | 1~12 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-750 | 750 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-750 | 750 nm | 2~5 W | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-750-SLD-SM | 750 nm | 1~12 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-750 | 750 nm | 1~1500 mW | – | Multimode | – | <5 | – | – | – | – | 10000 | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| FC-750 | 750 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-750(FC) | 750 nm | 1~4000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
810 NM RED Laser.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Parameters of customed power supply | Expected lifetime (hours) | Operating voltage(internal PCB) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of internal PCB | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CW-810 | 810 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TUN-800~817 | 810 nm | 1~40 mW | <3%, <2%, <1% | Near TEM00 | <1.0 | <5 | 20-30 | PSU-TUN | TEC: 7-12kΩ | >10000 | – | – | – | – | – | – | Datasheet |
| PGL-VI-810 | 810 nm | 1~200 mW | – | Near TEM00 | <1 | – | – | – | – | 10000 | 3VDC | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | mm2 / Φ12×50 | Datasheet |
501 NM Green Laser,Cyan Laser,Solid State Laser |
2 models| Model | Wavelength | Output / average power | Transverse mode | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-U-501-SF | 501 nm | 1~200 mW | – | – | – | – | – | – | – | – | |
| MGL-DF-501 | 501 nm | 200~600 mW | Near TEM00 | <5%, <3% | <5 | >100:1 | <10 | 15~30 | PSU-AOM (3U) | >10000 | Datasheet |
536 NM Green Laser, Green Solid State Laser |
2 models| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | M2 | Polarization ratio | Pointing stability after warm-up (mrad) | Cooled method (Water cooled) | Operating Temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-536 | 536 nm | 1~500 mW | TEM00 | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | Datasheet |
| MGL-A-536 | 536 nm | 500~4000 mW | TEM00 | – | <10 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-W-FDA | >10000 | <3%, <2% (<1% optional) | <1.5 | >100:1 Horizontal (Vertical optional) | <0.05 | WCH-580 | 10-35 | Datasheet |
537 NM Green Laser, Green Solid State Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-537 | 537 nm | 1~30 mW | TEM00 | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
540 NM Green Laser, Green Solid State Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-540 | 540 nm | 1~500 mW | TEM00 | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
545 NM Green Laser.
8 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Polarization Ratio | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Storage temperature (℃) | Power stability (rms, 4 hours , ±3°C) | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms,20Hz-20MHz) | Pointing stability over temperature (urad /°C) | Frequency shift (MHz)(over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | M2 | Beam divergence (mrad) | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Power Stability (rms, 4 hours ± 3°C) | Pointing Stability Over Temperature (urad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-545 | 545 nm | 1~1000 mW | <3%, <2%, <1% | TEM00 | <1.5 | >100:1, Vertical (Horizontal Optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-DP-545-B | 545 nm | 1~3.5 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | <5.0 | – | <10 | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | 2.0 | >100:1 Horizontal(Vertical optional) | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-S-545-MD | 545 nm | 1~1000 mW | – | TEMn1 | – | – | <10 | – | – | – | >10000 | – | – | – | – | – | 0-60 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-543 | 543 nm | 1~200 mW | – | TEM00 | <1.2 | – | – | – | – | PSU-H-FDA | >10000 | – | >100:1, Vertical (Horizontal optional) | – | – | – | – | <3%, <2%, <1% | Single | <1MHz | <1%, <0.5% | <8 | <±200 | 10-35 | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-543 | 543 nm | 1~200 mW | – | TEM00 | <1.5 | – | <5 | – | – | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | 10-35 | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MGL-U-543 | 543 nm | 1~200 mW | – | TEM00 | – | – | <5 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <1.0 | – | – | – | – | – | – | – | – | – | – | – | 10-35 | – | – | <1.2 | <1.5 | <8 | PSU-SR-OEM (12V/25A) | – | – | Datasheet |
| MGL-FN-543 | 543 nm | 1~1000 mW | <3%, <2%, <1% | TEM00 | <1.5 | >100:1, Vertical (Horizontal Optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-543 | 543 nm | 1~1.5 W | – | TEM00 | – | – | <10 | – | – | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | – | – | – | – | – | – | – | – | 10-35 | – | – | <3.0 | – | – | – | <3%, <2%, (<1% optional) | <20 | Datasheet |
558 NM Yellow Green Laser.
1 model| Model | Wavelength | Output / average power | Power Stability (rms, 4 hours ± 3°C) | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-N-558 | 558 nm | 1~100 mW | <5%, <3%, (<2% optional) | Near TEM00 | 1.5-3.0 | <1.5 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | Datasheet |
780 NM Infrared Laser.
19 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Pulse duration (ns) | Rep. rate (kHz) | Ave power stability (rms, 4 hours±3℃) | Operating temperature (℃) | Power supply (220VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-780(FC) | 780 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | Datasheet |
| FC-780 | 780 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-780 | 780 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-780 | 780 nm | 1~50 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | <1.1 | – | – | – | – | – | Datasheet |
| MLL-III-780L | 780 nm | 1~80 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | <1.5 | – | – | – | – | – | Datasheet |
| MLL-III-780 | 780 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | Datasheet |
| MLL-H-780 | 780 nm | 2~4 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | Datasheet |
| MLL-III-780-SM | 780 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | Datasheet |
| TEM-F-780 | 780 nm | 1~50 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | Datasheet |
| MDL-XS-780 | 780 nm | 1~80 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | Datasheet |
| MDL-III-780L | 780 nm | 1~80 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1.5 | – | – | – | – | – | Datasheet |
| MDL-III-780 | 780 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | Datasheet |
| MDL-H-780 | 780 nm | 2~4 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | Datasheet |
| MDL-III-780-SM | 780 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | Datasheet |
| TUN-TiL-780-850 | 780 nm | 1~500 mW | – | – | <3 | – | Water Cooled | – | – | >10000 | – | – | ~10 | 1-5 | <5%, <3% | 15-35 | PSU-HPL | Datasheet |
| TUN-TiA-770-840 | 770 nm | 1~2500 mW | – | – | <3.5 | <10 | – | – | 12V/25A | >10000 | – | – | <40 | – | <5%, <3% | 15-35 | – | Datasheet |
| UN-Ti-CW-760-840 | 760 nm | 1~3000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UN-Ti-740-840 | 740 nm | 1~7000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-780 | 780 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1050 NM Infrared Laser Module, Infrared DPSS Lasers.
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-III-1050-SLD | 1050 nm | 1~17 mW | |
| MDL-III-1050-SLD-SM | 1050 nm | 1~17 mW |
1270nm DFB Laser, Infrared Laser, DPSS Laser |
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | M2 after fiber | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1270(FC) | 1270 nm | 1~4500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | Datasheet |
| FC-1270 | 1270 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1270 | 1270 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | Datasheet |
| MLL-F-1270 | 1270 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1270-SM | 1270 nm | 1~10 mW | <2%, <1%, <0.5% | TEM00 | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | 1m | ~1.1 | Datasheet |
| MDL-H-1270 | 1270 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | Datasheet |
| MDL-F-1270 | 1270 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1270-SM | 1270 nm | 1~10 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | Datasheet |
| MDL-III-1270DFB-SM | 1270 nm | 1~10 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | Datasheet |
| FC-OEM-1270 | 1270 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – |
1610nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|
| MIL-W-1600 | 1600 nm | 100~2000 mW | <5%, <3% | Air Cooled | Datasheet |
1700 NM IR Laser, Infrared Diode Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1700 | 1700 nm | 1~100 mW | <1%, <2%, <3% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1KHz 1KHz-10KHz, 10KHz-30KHz optional | 10000 | 1 year | – | – | Datasheet |
| MIL-W-1700 | 1700 nm | 100~3000 mW | – | – | – | – | – | – | – | – | – | <5%, <3% | Air Cooled | Datasheet |
1850 NM IR Laser, Infrared Diode Laser |
4 models| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1850(FC) | 1850 nm | 1~600 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| FC-1850 | 1850 nm | 1~900 mW | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-1850 | 1850 nm | 1~700 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | Datasheet |
| MDL-F-1850 | 1850 nm | 1~700 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
Infrared Diode Laser AT 1940 NM.
6 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | Power stability (rms, 4 hours±3℃) | made features of ultra compact, long lifetime | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MXL-1930(FC) | 1930 nm | 1~510 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-1930 | 1930 nm | 1~15 W | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1930 | 1930 nm | 1~600 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | – | – | – | Datasheet |
| MIL-N-1940 | 1940 nm | 1~2000 mW | – | Near TEM00 | <2 | <10 | 15-30 | PSU-H-LED or PSU-H-FDA | – | >10000 | – | <2%, <1% | Polarizaion ratio | Air Cooled | Datasheet |
| MIL-W-1940 | 1940 nm | 1~11 W | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1940 | 1940 nm | 1~600 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | – | – | – | Datasheet |
976 NM Infrared Laser.
19 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Operating temperature (℃) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Modulation option | monitoring, | Operating voltage (VDC) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-976(FC) | 976 nm | 1 mW~2 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-976 | 976 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-976L | 976 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-976 | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-976 | 976 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-976 | 976 nm | 2.5~5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-976 | 976 nm | 5~8 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-976-SM | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-976 | 976 nm | 1~50 mW | <2%, <1%, <0.5% | Near TEM00 | <1.0 | <5 | – | – | – | >10000 | <1%, <0.5% | ~1.5 | 10-35 | – | – | – | – | AMOD (Analog) DC-100kHz | inspection | 12V/4A | – | – | – | – | – | – | – | Datasheet |
| MDL-III-976L | 976 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-976 | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-976 | 976 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-976 | 976 nm | 2.5~5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-976 | 976 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-976 | 976 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-976-SM | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-976-A | 976 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-976-B | 976 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-976 | 976 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | Datasheet |
638 NM RED Diode Laser.
1 model| Model | Wavelength | Output / average power | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Fiber Jacket | Power stability (rms, 4 hours±3℃) | customers’ equipment. Cooled method | Storage temperature (℃) | Modulation option | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YL-I-638 | 638 nm | 1~40 W | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | Air cooled | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
642 NM RED Laser, RED Diode Laser, RED Laser Module |
12 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Cooled method | Power stability (rms, over 4 hours) | M2 factor | Operating temperature (℃) | Power supply (85-264VAC) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-C-642 | 642 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-LN-642 | 642 nm | 1~100 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-642 | 642 nm | 1~200 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Near TEM00 | Conduction | – | – | – | – | – | – | Datasheet |
| MLL-III-642-SM | 642 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-F-642 | 642 nm | 1~100 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| TEM-FN-642 | 642 nm | 1~180 mW | – | – | – | <1.5 | <5 | – | – | 10000 | – | – | <2%, <1%, <0.5% | <1.1 | 25+/-3 | PSU-III-LED / PSU-III-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
| MDL-XS-642 | 642 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-642 | 642 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.5 / <1.2 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Conduction | – | – | – | – | – | – | Datasheet |
| DL-MD-642 | 642 nm | 1~2000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| DL-HD-642 | 642 nm | 2~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-642-SM | 642 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-642 | 642 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
650 NM RED Laser, RED Diode Laser, RED Laser Module |
16 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | Polarization direction | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-650 | 650 nm | 1~50 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | Datasheet |
| MLL-III-650L | 650 nm | 1~180 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | Datasheet |
| MLL-III-650 | 650 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | Datasheet |
| MLL-III-650-SM | 650 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | Datasheet |
| TEM-F-650 | 650 nm | 1~50 mW | <2%, <1%, <0.5% | TEM00 | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | Datasheet |
| MDL-III-650-SLD | 650 nm | 1~8 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XS-650 | 650 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-650L | 650 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-650R | 650 nm | 1~200 mW | <3%, <2%, <1% | Round | – | – | ~10 / ~20 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | Datasheet |
| MDL-III-650 | 650 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-MD-650 | 650 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-HD-650 | 650 nm | 1.5~3 W | <2%, <1%, <0.5% | Multimode | – | – | ~2.5×2.5 | <5 | – | PSU-N-FDA/PSU-N-LED | >10000 | – | Horizontal+ Vertical | 25±3 | Datasheet |
| MDL-XD-650 | 650 nm | 3~4.5 W | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-650-SLD-SM | 650 nm | 1~8 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-650-SM | 650 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-650 | 650 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – |
369 NM UV Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MSL-T-369 | 369 nm | 1~80 mW |
375 NM UV Diode Laser.
13 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization direction | Operating temperature (℃) | stability | Operating voltage(internal PCB) | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Dimensions of laser head (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-375(FC) | 375 nm | 1~700 mW | <2%, <1%, <0.5% | Multimode | ~2.5×1.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-375 | 375 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-375 | 375 nm | 1~15 mW | <2%, <1%, <0.5% | Multimode | ~2.5×1.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-375L | 375 nm | 1~50 mW | <2%, <1%, <0.5% | – | <0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | <1.5 / <1.2 | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-375 | 375 nm | 1~400 mW | <2%, <1%, <0.5% | Multimode | ~2.3×0.2 / ~3.5×0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-375 | 375 nm | 400~800 mW | <2%, <1%, <0.5% | Multimode | ~2.5×1.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-375 | 375 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | ~2.5×1.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-375L | 375 nm | 1~50 mW | <2%, <1%, <0.5% | Near TEM00 | <0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1.5 / <1.2 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-375 | 375 nm | 1~400 mW | <2%, <1%, <0.5% | Multimode | ~2.0×0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-375 | 375 nm | 400~800 mW | <2%, <1%, <0.5% | Multimode | ~2.5×1.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-375 | 375 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | ~8.0×0.5 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | – | Horizontal | 25±3 | – | – | – | – | – | – | – | Datasheet |
| MDL-380 | 380 nm | 1~300 mW | <2%, <1%, <0.5% | Multimode | ~4.0×1.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-375 | 375 nm | 1~30 mW | – | – | – | – | – | 10°C to 35°C | – | – | – | – | – | – | lifetime | 5VDC | TTL or Analog0-3V,0-5V | Cable with flying leads | -10°C to 70°C | <90 %, non-condensing | Φ56×250mm2 / (PGL-FC-375/589) | Datasheet |
411 NM Violet Blue Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MSL-T-411 | 411 nm | 1~80 mW |
582 NM Green Laser,Cyan Laser,Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MGL-U-582-SF | 582 nm | 1~100 mW |
597 NM Yellow Orange Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MGL-U-597-SF | 597 nm | 1~120 mW | TEM00 | ~3.0 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
400 NM Blue Violet Diode Laser.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-400(FC) | 400 nm | 1~250 mW | <2%, <1%, <0.5% | Multimode | ~2.5×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| FC-400 | 400 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-400 | 400 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | ~2.5×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MLL-III-400L | 400 nm | 1~300 mW | <2%, <1%, <0.5% | Near TEM00 | ~0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | <1.5 / <1.2 | Datasheet |
| MLL-III-400 | 400 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <2.5×1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | Datasheet |
| MLL-H-400 | 400 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-400 | 400 nm | 1~200 mW | <2%, <1%, <0.5% | Multimode | ~2.5×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-III-400L | 400 nm | 1~300 mW | <2%, <1%, <0.5% | Near TEM00 | ~0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1.5 / <1.2 | Datasheet |
| MDL-III-400 | 400 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <2.5×1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-H-400 | 400 nm | 1~3 W | <2%, <1%, <0.5% | Multimode | ~2.5×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
442 NM Blue Violet Diode Laser.
18 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Transverse mode | Operating temperature (℃) | Fiber Core diameter | Fiber connector | M2 after fiber | Polarization direction | Fiber type | Fiber jacket | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-442(FC) | 442 nm | 1~3500 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-442 | 442 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-442 | 442 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-LN-442 | 442 nm | 1~15 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-442L | 442 nm | 1~80 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Near TEM00 | – | – | – | – | – | – | – | Datasheet |
| MLL-III-442 | 442 nm | 80~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-442 | 442 nm | 1~4 W | <2%, <1%, <0.5% | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | Multimode | 10-35 | – | – | – | – | – | – | Datasheet |
| MLL-III-442-SM | 442 nm | 1~15 mW | <2%, <1%, <0.5% | – | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | TEM00 | – | 4-9μm, 0.12NA | FC/PC, FC/APC optional | ~1.1 | – | – | – | Datasheet |
| TEM-F-442 | 442 nm | 1~15 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-442 | 442 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-442L | 442 nm | 1~80 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-442 | 442 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | – | – | – | – | – | Datasheet |
| MDL-F-442 | 442 nm | 1~4 W | – | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | – | Multimode | 10-35 | – | – | – | – | – | – | Datasheet |
| MDL-MD-442 | 442 nm | 1~8000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | Multimode | 25±3 | – | – | – | Horizontal+ Vertical / Horizontal/ Vertical | – | – | Datasheet |
| MDL-HD-442 | 442 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-442 | 442 nm | 16~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-442-SM | 442 nm | 1~15 mW | <2%, <1%, <0.5% | – | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | TEM00 | – | 4-9μm, 0.12NA | FC/PC, FC/APC optional | ~1.1 | – | SM fiber, PM fiber optional | Metal, PVC optional | Datasheet |
| FC-OEM-442 | 442 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
445 NM Blue Violet Diode Laser.
28 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Operating temperature (℃) | Polarization direction | Power stability (rms, over 4 hours) | Warranty | Beam diameter at the aperture(1/e2) (mm) | Operating voltage(external PCB1) | Operating voltage(external PCB2) | Operating voltage(external PCB3) | Connection | Operating temperature | Storage temperature | Humidity | Power stability(rms, over 4 hours) | Warm-up time minutes | Operating voltage(PSU-V-OEM) | Dimensions of laser head | Operating voltage(internal PCB) | Operating voltage(internal PCB1) | Dimensions of internal PCB mm | Dimensions of internal PCB1 mm | Warranty months | Operating voltage(PSU-I-OEM) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-445(FC) | 445 nm | 1~15 W | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-445 | 445 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-445 | 445 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-LN-445 | 445 nm | 1~50 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | TEM00 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-445L | 445 nm | 1~500 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Near TEM00 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-445 | 445 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-445 | 445 nm | 1~4 W | <2%, <1%, <0.5% | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | <1%, <0.5% | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-445-SM | 445 nm | 1~50 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-445 | 445 nm | 1~50 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-445 | 445 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-445L | 445 nm | 1~500 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-445 | 445 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.5×1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-445 | 445 nm | 1~4 W | – | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-445 | 445 nm | 1~8000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Multimode | – | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-445 | 445 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-445 | 445 nm | 16~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-445-SM | 445 nm | 1~50 mW | – | – | – | <5 | – | – | – | 10000 | Multimode | – | 10~35 | – | <3%, <2%, <1%, <0.5% | 1 year | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-445 | 445 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| YL-I-445 | 445 nm | 1~40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| OEM-I-445 | 445 nm | 1~13 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-D8-445 | 445 nm | 1~30 mW | – | – | <1 | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | ~3.5 | 6VDC | 5VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | 5-12VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-D12-445 | 445 nm | 1~50 mW | – | – | <1 | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | ~3.5 | 6VDC | 5VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | 5-12VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-F-445 | 445 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-FP-445 | 445 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-FS-445 | 445 nm | 1~80 mW | – | – | <1 | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | ~4.5 | – | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | <10 | 100-240VAC(TTL30kH and Analog 0-5V,optional) | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-445 | 445 nm | 1~80 mW | – | – | <1 | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | ~4.5 | – | 5-12VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90%, non-condensing | – | – | – | – | 6VDC | 5VDC(TTL30kHz and Analog0-3V,0-5V, optional) | Φ12×50 | Φ15×90 | – | – | – | Datasheet |
| PGL-V-H-445 | 445 nm | 1~80 mW | – | – | – | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | <10 | 100-240VAC | 92(L)×40(W)×40(H)mm3 | – | – | – | – | 1 | 12VDC | TTL30kHz and Analog 0-5V | Datasheet |
| PGL-H-445 | 445 nm | 1~1000 mW | – | – | <1 | – | – | – | – | 10000 | Near TEM00 | – | – | – | – | – | ~4.5 | – | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | <10 | 100-240VAC(TTL30kH and Analog 0-5V,optional) | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | Datasheet |
447 NM Blue Violet Diode Laser.
23 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Operating temperature (℃) | Polarization direction | Operating voltage(external PCB2) | Operating voltage(external PCB3) | Connection | Operating temperature | Storage temperature | Humidity | Operating voltage(internal PCB1) | Dimensions of internal PCB mm | Dimensions of internal PCB1 mm | Power stability(rms, over 4 hours) | Operating voltage(PSU-V-OEM) | Dimensions of laser head | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-447(FC) | 447 nm | 1~15 W | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-447 | 447 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-447 | 447 nm | 1~50 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | TEM00 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-447L | 447 nm | 1~500 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Near TEM00 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-447 | 447 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-447 | 447 nm | 1~4 W | <2%, <1%, <0.5% | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | – | <1%, <0.5% | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-447-SM | 447 nm | 1~50 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-447 | 447 nm | 1~50 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-447 | 447 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-447L | 447 nm | 1~500 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-447 | 447 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-447 | 447 nm | 1~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-447 | 447 nm | 1~8000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Multimode | – | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-447 | 447 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-447 | 447 nm | 16~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-447-SM | 447 nm | 1~50 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-447 | 447 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-D8-447 | 447 nm | 1~30 mW | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | 5VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | 5-12VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | – | Datasheet |
| PGL-D12-447 | 447 nm | 1~50 mW | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | 5VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | 5-12VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-447 | 447 nm | 1~80 mW | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | 5-12VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90%, non-condensing | 5VDC(TTL30kHz and Analog0-3V,0-5V, optional) | Φ12×50 | Φ15×90 | – | – | – | – | Datasheet |
| PGL-FS-447 | 447 nm | 1~80 mW | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | <5%, <3%, <1% | 100-240VAC(TTL30kH and Analog 0-5V,optional) | 77(L)×30(W)×30(H)mm3 | – | Datasheet |
| PGL-H-447 | 447 nm | 1~1000 mW | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | <5%, <3%, <1% | 100-240VAC(TTL30kH and Analog 0-5V,optional) | 77(L)×30(W)×30(H)mm3 | – | Datasheet |
| PGL-V-H-447 | 447 nm | 1~3000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | <5%, <3%, <1% | 100-240VAC | 92(L)×40(W)×40(H)mm3 | TTL30kHz and Analog 0-5V | Datasheet |
450 NM Blue Violet Diode Laser.
29 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Transverse mode | Operating temperature (℃) | Polarization direction | Fiber Core Diameter (um) | Fiber Connector | ultra-compact design, a long lifetime, and Fiber Jacket | Modulation option | Power supply (90-264VAC) | Warranty | Operating voltage(external PCB2) | Operating voltage(external PCB3) | Connection | Operating temperature | Storage temperature | Humidity | Power stability(rms, over 4 hours) | Operating voltage(PSU-V-OEM) | Modulation optional | Dimensions of laser head | Beam divergence (mrad) | Laser operation mode | Storage temperature (°C) | Humidity (%) | Weight (g) | Operating voltage(internal PCB1) | Dimensions of internal PCB mm | Dimensions of internal PCB1 mm | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-450(FC) | 450 nm | 1~15 W | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-450 | 450 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-450 | 450 nm | 1~50 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-450L | 450 nm | 1~500 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Near TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-450 | 450 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-450 | 450 nm | 1~4 W | <2%, <1%, <0.5% | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-450-SM | 450 nm | 1~50 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-450 | 450 nm | 1~50 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-450 | 450 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-450L | 450 nm | 1~500 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-450 | 450 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-450 | 450 nm | 1~4 W | – | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | – | Multimode | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-450 | 450 nm | 1~8000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | Multimode | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-450 | 450 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-450 | 450 nm | 16~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-450-SM | 450 nm | 1~50 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-450 | 450 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| YL-I-450 | 450 nm | 1~200 W | – | – | – | – | – | – | – | – | – | – | – | – | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | PVC, Metal optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-DH-450 | 450 nm | 15-30 W | – | – | – | <5 | – | – | – | 10000 | – | – | 25+/-3 (OEM-DH-450) / 10-35 (OEM-DH-450-Water) | – | – | – | – | – | PSU-H-LED | 1 year | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-D8-450 | 450 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | – | – | – | – | – | 5VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | 5-12VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-D12-450 | 450 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | – | – | – | – | – | 5VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | 5-12VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-FC-450 | 450 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | 100-240VAC | TTL30kHz and Analog 0-5V | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | Datasheet |
| PGL-F-450 | 450 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-LF-450 | 450 nm | 1~50 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | – | – | TTL 30kHz or analog (0-3V or 0-5V) | – | <1.5 | CW | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | Datasheet |
| PGL-VI-450 | 450 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-FS-450 | 450 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | 100-240VAC(TTL30kH and Analog 0-5V,optional) | – | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-450 | 450 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | – | – | – | – | – | 5-12VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90%, non-condensing | – | – | – | – | – | – | – | – | – | 5VDC(TTL30kHz and Analog0-3V,0-5V, optional) | Φ12×50 | Φ15×90 | Datasheet |
| PGL-H-450 | 450 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | 100-240VAC(TTL30kH and Analog 0-5V,optional) | – | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-450 | 450 nm | 1~3000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | 100-240VAC | TTL30kHz and Analog 0-5V | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | Datasheet |
515 NM Green Laser.
6 models| Model | Wavelength | Output / average power | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Beam diameter at the aperture (1/e2, mm) | Operating voltage (VDC) | Transverse mode | M2 | Pointing Stability Over Temperature (urad/°C) | Power Stability (rms, 4 hours ± 3°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-515(FC) | 515 nm | 1~400 mW | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| FC-515 | 515 nm | 1~90 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-515 | 515 nm | 1~50 mW | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | – | PSU-H-FDA | >10000 | <3%, <2%, <1% | <0.1 | <3.0 | PSU-SR-OEM (12V/25A) | – | – | – | – | Datasheet |
| MGL-F-515 | 515 nm | 1~100 mW | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-515 | 515 nm | 100~150 mW | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | 10-35 | – | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | – | – | – | TEM00 | <1.2 | <20 | – | Datasheet |
| MGL-W-515A | 515 nm | 150~500 mW | >50:1(100:1 optional), Horizontal(Vertical optional) | – | 10-35 | – | PSU-W-LED | – | – | – | – | – | Near TEM00 | – | <20 | <3%, <2%, (<1% optional) | Datasheet |
520 NM Green Laser.
32 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization direction | Operating temperature (℃) | Beam divergence, half angle (mrad) | Power supply | TTL / Analog modulation | Warranty | Power stability (rms, 4 hours±3℃) | Power supply (24VDC) | Modulation option | Operating voltage(external PCB1) | Connection | Operating temperature | Storage temperature | Humidity | Beam divergence (mrad) | Laser operation mode | Modulation optional | Storage temperature (°C) | Humidity (%) | Weight (g) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Dimensions of laser head | Operating voltage(internal PCB) | Dimensions of internal PCB | Operating voltage(PSU-II-OEM) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-C-520 | 520 nm | 1~40 mW | <2%, <1%, <0.5% | Multimode | ~4.0×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-520 | 520 nm | 1~50 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-520L | 520 nm | 1~100 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | <1.5 / <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-520 | 520 nm | 1~800 mW | <2%, <1%, <0.5% | – | <4.0×0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-520 | 520 nm | 800~1000 mW | <2%, <1%, <0.5% | Multimode | ~4.0×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-520-SM | 520 nm | 1~50 mW | <2%, <1%, <0.5% | – | <4.0×0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-520 | 520 nm | 1~50 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-520 | 520 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | ~4.0×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-520L | 520 nm | 1~100 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1.5 / <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-520 | 520 nm | 1~800 mW | <2%, <1%, <0.5% | Multimode | <4.0×0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-520 | 520 nm | 800~1000 mW | <2%, <1%, <0.5% | Multimode | ~4.0×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-520 | 520 nm | 1-2 W | <2%, <1%, <0.5% | Multimode | ~2.2×1.2 / ~2.1×1.2 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | – | Horizontal+ Vertical / Horizontal/ Vertical | 25±3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-520 | 520 nm | 2~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-520 | 520 nm | 4~10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-520-SM | 520 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | <4.0×0.5 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-520 | 520 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| YL-I-520 | 520 nm | 1~70 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| OEM-F-520 | 520 nm | 1~800 mW | – | Multimode | – | <5 | – | – | – | 10000 | – | – | – | 25+/-3 (OEM-F-520) / 10-35 (F-520-HS) | <1.3×0.1 | PSU-SD-OEM | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-JD-520 | 520 nm | 30~55 W | – | – | ~1.2 | <5 | Air cooled | – | – | >10000 | – | – | – | 0-30 | – | – | – | – | <2%, <1% | PSU-PNDT-OEM (24V/ 14.6A) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-AD-520 | 520 nm | 55~60 W | – | – | ~1.2 | <5 | Air cooled | – | – | >10000 | – | – | – | 0-30 | – | – | – | – | <2%, <1% | PSU-PNDT-OEM (24V/ 14.6A) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-D8-520 | 520 nm | 1~30 mW | – | Near TEM00 | <1 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | 7.5-8VDC | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-D12-520 | 520 nm | 1~50 mW | – | Near TEM00 | <1 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | 7.5-8VDC | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-LF-520 | 520 nm | 1~50 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-F-520 | 520 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-FP-520 | 520 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-FC-520 | 520 nm | 1~50 mW | – | Near TEM00 / Multimode | <1 / <3×0.5 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | – | – | – | Datasheet |
| PGL-VI-520 | 520 nm | 1~100 mW | – | Near TEM00 | <1 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90%, non-condensing | – | – | – | – | – | – | – | – | – | – | – | – | 7.5-8VDC | mm2 / Φ12×50 | – | Datasheet |
| PGL-FS-520 | 520 nm | 1~100 mW | – | Near TEM00 | <1 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | – | – | – | 77(L)×30(W)×30(H)mm3 | – | – | 7V / (TTL30kHz or Analog 0-5V,optional) | Datasheet |
| PGL-VI-FC-520 | 520 nm | 1~100 mW | – | Near TEM00 | <1 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90%, non-condensing | – | – | – | – | – | – | – | – | – | – | – | – | 7.5-8VDC | mm2 / Φ12×50 | – | Datasheet |
| PGL-V-H-520 | 520 nm | 1~800 mW | – | Near TEM00 / Multimode | <1 / <3×0.5 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | – | – | – | Datasheet |
| PGL-V-H-FC-520 | 520 nm | 1~800 mW | – | Near TEM00 / Multimode | <1 / <3×0.5 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | – | – | – | Datasheet |
| PGL-H-520 | 520 nm | 1~800 mW | – | Near TEM00 | <1 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | – | – | – | 77(L)×30(W)×30(H)mm3 | – | – | 7V / (TTL30kHz or Analog 0-5V,optional) | Datasheet |
556 NM Yellow Green Laser.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam divergence (mrad) | Polarization ratio | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-FN-556 | 556 nm | 1~200 mW | <3%, <2%, <1% | TEM00 | <1.5 | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | Datasheet |
| MGL-U-556 | 556 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-FN-556 | 556 nm | 200~800 mW | – | TEM00 | – | <5 | <8 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | <1.5 | >100:1, Vertical (Horizontal optional) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-W-556A | 556 nm | 800~3000 mW | – | Near TEM00 | – | <10 | – | 10-35 | PSU-W-LED | – | >10000 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | <5%, <3%, (<2% optional) | 3-6 | <1.5 | <20 | Datasheet |
Infrared Laser, 1030 NM Infrared Laser Module, Infrared DPSS Lasers.
12 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Cooled method | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Operating voltage (VDC) | Fiber type | Fiber Core diameter | Fiber connector | Fiber length | Fiber jacket | M2 after fiber | Beam divergence (mrad) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-1030 | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1030L | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | TEM00 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1030 | 1030 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-1030 | 1030 nm | 1~100 mW | – | – | – | – | <5 | 10-35 | PSU-H-FDA | >10000 | – | – | <3%, <2% | <0.1 | ~2.0 | >100:1, Horizontal (Vertical optional) | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1030-SM | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | – | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | TEM00 | Conduction | – | – | – | – | – | SM fiber, PM fiber optional | 6μm, 0.12NA | FC/PC, FC/APC optional | 1m | Metal, PVC optional | ~1.1 | – | – | Datasheet |
| TEM-F-1030 | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1030L | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | TEM00 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1030 | 1030 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-F-1030 | 1030 nm | 1~600 mW | – | – | – | – | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | TEM00 | – | – | – | ~1.5 | >100:1, Horizontal (Vertical optional) | – | – | – | – | – | – | – | <2.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MDL-III-1030DFB-SM | 1030 nm | 1~200 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1030-SM | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-1030 | 1030 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1060 NM Infrared Diode Lasers,infrared Diode Laser System.
23 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Modulation option | Fiber type | Fiber connector | Fiber jacket | Operating temperature (℃) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Operating temperature | Storage temperature | Humidity | Dimensions of internal PCB | Warranty | Operating voltage(external PCB1) | Operating voltage(external PCB2) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1060(FC) | 1060 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-1060 | 1060 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1060L | 1060 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-1060 | 1060 nm | 1~500 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-1064 | 1064 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1060 | 1060 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1060 | 1060 nm | 1.5~2.5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1060-SM | 1060 nm | 1~500 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | SM fiber, PM fiber optional | FC/PC, FC/APC optional | Metal, PVC optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1064-SM | 1064 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1060 | 1060 nm | 1~500 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1064 | 1064 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060-SLD | 1060 nm | 1~17 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060L | 1060 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060 | 1060 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1060 | 1060 nm | 1.5~2.5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-1060 | 1060 nm | 2.5~5 W | – | Multimode | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060-SLD-SM | 1060 nm | 1~17 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060-SM | 1060 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1064-SM | 1064 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-1060 | 1060 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-1060 | 1060 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-1060 | 1060 nm | 1~100 mW | – | NearTEM00 | <1 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | 10°C to 35°C | -20°C to 80°C | < 90 %, non-condensing | mm2 / Φ15×90 | – | – | – | Datasheet |
| PGL-H-1060 | 1060 nm | 1~1500 mW | – | Multimode | <5 | – | – | – | – | 10,000 | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | 0°C to 40°C | -20°C to 80°C | <90 %, non-condensing | – | months / 6 | 3VDC | 5VDC(TTL10kHz or Analog0-5V) | Datasheet |
Infrared Laser,1310 NM Infrared Diode Lasers,infrared Diode Laser System.
20 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Warranty (years) | Operating voltage(internal PCB) | Operating temperature | Storage temperature | Humidity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1310(FC) | 1310 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-1310 | 1310 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-1310 | 1310 nm | 1~200 mW | <2%, <1%, <0.5% | TEM00 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1310L | 1310 nm | 1~10 mW | <2%, <1%, <0.5% | Near TEM00 | <2.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1310 | 1310 nm | 10~800 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1310 | 1310 nm | 800~3000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1310-SM | 1310 nm | 1~180 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1310DFB | 1310 nm | 1~10 mW | <2%, <1%, <0.5% | TEM00 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1310 | 1310 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310L | 1310 nm | 1~10 mW | <2%, <1%, <0.5% | Near TEM00 | <2.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310-SLD | 1310 nm | 1~17 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310 | 1310 nm | 10~800 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1310 | 1310 nm | 800~3000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310-SM | 1310 nm | 1~180 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310DFB-SM | 1310 nm | 1~180 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310-SLD-SM | 1310 nm | 1~17 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-1310 | 1310 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-1310 | 1310 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | Datasheet |
| PGL-VI-1310 | 1310 nm | 1~10 mW | – | Near TEM00 | <3 | – | – | – | – | 10000 | – | – | – | – | – | Cable with flying leads | – | – | – | 1 | 3VDC (TTL10kHz, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | Datasheet |
| PGL-FP-1310 | 1310 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1313 NM Infrared Laser Module,infrared Lasers.
4 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam divergence (mrad) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1313-SU | 1313 nm | 1~1000 mW | TEM00 | <1% | <1.2 | ~1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | Datasheet |
| MLL-H-1313 | 1313 nm | 1~1000 mW | TEM00 | <1% | <1.5 | – | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <0.1 | <2.0 | – | Datasheet |
| MIL-H-1313 | 1313 nm | 1~1000 mW | TEM00 | – | <1.5 | – | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | <2.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MIL-U-1313-SU | 1313 nm | 1000~2000 mW | TEM00 | – | <1.5 | ~1.0 | – | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
Infrared Laser, 1319 NM Infrared Laser Module,infrared Lasers.
5 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Beam divergence (mrad) | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1319-SU | 1319 nm | 1~200 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | Datasheet |
| MLL-U-1319-FL | 1319 nm | 1~1000 mW | TEM00 | <1% | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | – | >10000 | <3%, <2%, <1% | <1.0 | <1.5 | – | – | – | Datasheet |
| MIL-U-1319-FL | 1319 nm | 1~1500 mW | TEM00 | – | <1.5 / <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | <3%, <2%, <1% | – | <1.5 | – | – | – | Datasheet |
| MIL-V-1319 | 1319 nm | 1~5 W | – | – | ＜1.3 | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | 10-35 | PSU-W-LED | – | >10000 | – | – | – | <3%, <2%, (<1% optional) | <3.0 | <20 | Datasheet |
| MIL-W-1319A | 1319 nm | 5~10 W | – | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | 10-35 | PSU-W-LED | – | >10000 | – | – | – | <3%, <2%, (<1% optional) | <1.0 | <20 | Datasheet |
Infrared Laser, 1573 NM Infrared Laser Module, DPSS Infrared Lasers.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|
| MLL-III-1573-SM | 1573 nm | 1~15 mW | – | – | |
| TEM-F-1573DFB | 1573 nm | 1~20 mW | – | – | |
| MIL-W-1573 | 1573 nm | 100~2000 mW | <5%, <3% | Air Cooled | Datasheet |
| MDL-III-1573-SM | 1573 nm | 1~15 mW | – | – | |
| MDL-III-1573DFB-SM | 1573 nm | 1~15 mW | – | – | |
| FC-OEM-1573 | 1573 nm | 1~15 mW | – | – |
Infrared Diode Laser AT 1870 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1870 | 1870 nm | 1~800 mW | <1%, <2%, <3% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1KHz 1KHz-10KHz, 10KHz-30KHz optional | 10000 | 1 year | Datasheet |
Infrared Diode Laser AT 1900 NM.
3 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1900(FC) | 1900 nm | 1~400 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
| FC-1900 | 1900 nm | 1~10 W | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1900 | 1900 nm | 1~500 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Laser,785 NM Infrared Diode Lasers,infrared Diode Laser System.
22 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Spectral line width (nm) | Fiber type | Fiber Core diameter | Fiber connector | Fiber length | Fiber jacket | M2 after fiber | Operating voltage(internal PCB) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of internal PCB | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-785(FC) | 785 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-785 | 785 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-785 | 785 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-785 | 785 nm | 1~150 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-785L | 785 nm | 1~100 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-785-Lock | 785 nm | 1~600 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | <0.2, <0.1, <0. 06 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-785 | 785 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-785 | 785 nm | 2500~4000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-785-SM | 785 nm | 1~150 mW | <2%, <1%, <0.5% | TEM00 | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | 1m | Metal, PVC optional | ~1.1 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-785 | 785 nm | 1~150 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-785 | 785 nm | 1~80 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-785L | 785 nm | 1~100 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-785R | 785 nm | 1~350 mW | <3%, <2%, <1% | Round | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-785 | 785 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-785 | 785 nm | 2500~4000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-785-SM | 785 nm | 1~150 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-785-A | 785 nm | 1~150 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-785-B | 785 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-F-785 | 785 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-785 | 785 nm | 1~100 mW | – | Near TEM00 | <1 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | 3VDC | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | mm2 / Φ12×50 | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-785 | 785 nm | 1~100 mW | – | Near TEM00 | <1 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | 3VDC | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | mm2 / Φ12×50 | – | – | – | – | – | – | Datasheet |
| PGL-V-H-785 | 785 nm | 1~2000 mW | – | Multimode | <5 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | Datasheet |
Infrared Laser,790 NM Infrared Diode Lasers,infrared Diode Laser System.
13 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Transverse mode | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-790(FC) | 790 nm | 1~800 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| FC-790 | 790 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-790 | 790 nm | 1~10 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | – | Datasheet |
| MLL-III-790L | 790 nm | 1~10 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | Datasheet |
| MLL-III-790 | 790 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Multimode | Datasheet |
| MLL-III-790-SM | 790 nm | 1~10 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Multimode | Datasheet |
| TEM-F-790 | 790 nm | 1~10 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | Datasheet |
| MDL-III-790L | 790 nm | 1~10 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-III-790 | 790 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | Datasheet |
| MDL-III-790-SLD | 790 nm | 1~12 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-790-SM | 790 nm | 1~10 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | Datasheet |
| MDL-III-790-SLD-SM | 790 nm | 1~12 mW | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-790 | 790 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – |
Infrared Diode Laser, 800 NM Infrared Diode Lasers, High Power Diode Laser System.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-800(FC) | 800 nm | 1 mW~2 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | Datasheet |
| FC-800 | 800 nm | 1~10 W | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-800 | 800 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | Datasheet |
| MDL-III-800R | 800 nm | 1~500 mW | <3%, <2%, <1% | Round | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Datasheet |
| MDL-H-800 | 800 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | Datasheet |
| MDL-800 | 800 nm | 1 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | Datasheet |
Infrared Diode Laser, 808 NM Infrared Diode Lasers, High Power Diode Laser System.
28 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Operating temperature (℃) | Fiber | M2 after fiber | Power stability (rms, over 4 hours) | Power supply | TTL / Analog modulation | Warranty | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-II-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Operating voltage(internal PCB) | Dimensions of internal PCB | Beam divergence (mrad) | Laser operation mode | Modulation optional | Storage temperature (°C) | Humidity (%) | Weight (g) | Dimensions | Φ12×38(L) mm2, 0.035 kg | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-C-808 | 808 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-808 | 808 nm | 1~400 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-808L | 808 nm | 1~100 mW | <2%, <1%, <0.5% | Near TEM00 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-808 | 808 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-808 | 808 nm | 2.5~6 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-808 | 808 nm | 6~8 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-808-SM | 808 nm | 1~400 mW | <2%, <1%, <0.5% | TEM00 | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | 1m | ~1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-808 | 808 nm | 1~400 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-808 | 808 nm | 1~80 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-808R | 808 nm | 1~500 mW | <3%, <2%, <1% | Round | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-808 | 808 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-I-808 | 808 nm | 1~2500 mW | – | Multimode | <3. 0 | <5 | – | – | – | 10000 | – | – | 10~35 | – | – | <1%, <3%, <5% | PSU-III-OEM | TTL or Analog with 1Hz-1KHz 1KHz-10KHz, 10KHz-30KHz optional | 1 year | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-808 | 808 nm | 2.5~6 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-808 | 808 nm | 6~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-808 | 808 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-SN-808 | 808 nm | 6~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-808-SM | 808 nm | 1~400 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-808 | 808 nm | 1~400 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-FP-808 | 808 nm | 1~30 mW | – | Near TEM00 / Multimode | <1 / <15 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-FC-808 | 808 nm | 1~50 mW | – | Near TEM00 / Multimode | <1 / <5 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | 100-240VAC | 12VDC | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-808 | 808 nm | 1~100 mW | – | Near TEM00 / Multimode | <1 / <10 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | 1 | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | 3VDC | mm2 / Φ12×50 | – | – | – | – | – | – | – | – | Datasheet |
| PGL-LF-808 | 808 nm | 1~100 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | Datasheet |
| PGL-FS-808 | 808 nm | 1~200 mW | – | Near TEM00 / Multimode | <1 / <15 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-808 | 808 nm | 1~200 mW | – | Near TEM00 / Multimode | <1 / <10 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | 1 | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | 3VDC | mm2 / Φ12×50 | – | – | – | – | – | – | – | – | Datasheet |
| PGL-D12-808 | 808 nm | 1~400 mW | – | Multimode | <5.0 | – | – | – | – | 10000 | – | – | 15~30 | – | – | – | DC 3V PCB / DC 5V PCB | – | 6 months | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 3VPCB / 5VPCB | 17(L) ×11(W) mm2 / 35(L) ×15(W) mm2 | Datasheet |
| PGL-H-808 | 808 nm | 1~1500 mW | – | Near TEM00 / Multimode | <1 / <15 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-808 | 808 nm | 1~2000 mW | – | Near TEM00 / Multimode | <1 / <5 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | 100-240VAC | 12VDC | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-FC-808 | 808 nm | 1~2000 mW | – | Near TEM00 / Multimode | <1 / <5 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | 100-240VAC | 12VDC | – | – | – | – | – | – | – | – | – | – | Datasheet |
830 NM Infrared Diode Laser.
25 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Transverse mode | Power supply (85-264VAC) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Operating voltage(internal PCB) | Operating temperature | Storage temperature | Humidity | Dimensions of internal PCB | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-830(FC) | 830 nm | 1~1500 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-830 | 830 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-830 | 830 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-LN-830 | 830 nm | 1~270 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-830L | 830 nm | 1~120 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Near TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-830 | 830 nm | 1~2000 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-830-SM | 830 nm | 1~270 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-830SLD | 830 nm | 1~20 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | – | >10000 | – | TEM00 | PSU-III-FDA /PSU-III-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-830 | 830 nm | 1~270 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-830-SLD | 830 nm | 1~8 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-830 | 830 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-830L | 830 nm | 1~120 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-830R | 830 nm | 1~500 mW | <3%, <2%, <1% | – | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Round | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-830 | 830 nm | 1~2000 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-830-SLD-SM | 830 nm | 1~8 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-830-SM | 830 nm | 1~270 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-830-A | 830 nm | 1~270 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-830-B | 830 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-830 | 830 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-F-830 | 830 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-830 | 830 nm | 1~100 mW | – | – | <1 | – | – | – | – | 10000 | – | Near TEM00 | – | – | – | – | Cable with flying leads | – | – | – | 3VDC | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | mm2 / Φ12×50 | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-830 | 830 nm | 1~100 mW | – | – | <1 | – | – | – | – | 10000 | – | Near TEM00 | – | – | – | – | Cable with flying leads | – | – | – | 3VDC | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | mm2 / Φ12×50 | – | – | – | – | – | – | Datasheet |
| PGL-FP-830 | 830 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-830 | 830 nm | 1~1000 mW | – | – | <5 | – | – | – | – | 10000 | – | Multimode | – | – | – | – | 9 pin connector | – | – | – | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | Datasheet |
| PGL-V-H-FC-830 | 830 nm | 1~1000 mW | – | – | <5 | – | – | – | – | 10000 | – | Multimode | – | – | – | – | 9 pin connector | – | – | – | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | Datasheet |
Infrared Laser, 852 NM Infrared Diode Lasers.
15 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Transverse mode | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-852(FC) | 852 nm | 1~1200 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-852 | 852 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-852 | 852 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-LN-852 | 852 nm | 1~350 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-852L | 852 nm | 1~150 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Near TEM00 | – | – | – | – | – | – | – | Datasheet |
| MLL-III-852 | 852 nm | 1~1500 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Multimode | – | – | – | – | – | – | – | Datasheet |
| MLL-III-852-SM | 852 nm | 1~350 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Multimode | – | – | – | – | – | – | – | Datasheet |
| TEM-F-852 | 852 nm | 1~350 mW | <2%, <1%, <0.5% | <1.1 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-852 | 852 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-852L | 852 nm | 1~150 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-852R | 852 nm | 1~300 mW | <3%, <2%, <1% | – | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Round | – | – | – | – | – | – | – | Datasheet |
| MDL-III-852 | 852 nm | 1~1500 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | – | – | – | – | – | Datasheet |
| MDL-III-852-SM | 852 nm | 1~350 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-852 | 852 nm | 1~350 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-852 | 852 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | Datasheet |
Infrared Laser, 940 NM Infrared Diode Lasers, High Power Diode Laser System.
19 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating temperature (℃) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Operating voltage(internal) | Operating voltage(external PCB1) | Operating temperature | Storage temperature | Humidity | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-940L | 940 nm | 1~250 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-940 | 940 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-940 | 940 nm | 1~4.5 W | – | Multimode | <1%, <0.5% | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-940-SM | 940 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-940 | 940 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940L | 940 nm | 1~250 mW | <2%, <1%, <0.5% | – | – | <1.5 | <1.0 | – | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940R | 940 nm | 1~350 mW | <3%, <2%, <1% | Round | – | – | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940 | 940 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-940 | 940 nm | 1~4.5 W | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-940 | 940 nm | 4.5~6 W | – | Multimode | – | – | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940-SM | 940 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-940 | 940 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-940 | 940 nm | 1~10 mW | – | – | – | – | – | – | – | -10°C to +45°C | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-F-940 | 940 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-940 | 940 nm | 1~100 mW | – | Near TEM00 | – | – | <1 | – | – | – | – | 10000 | – | – | – | – | Cable with flying leads | – | – | – | 3VDC (TTL10kHz, optional) | 5VDC(TTL30kHz or Analog 0-3V,0-5V, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-940 | 940 nm | 1~100 mW | – | Near TEM00 | – | – | <1 | – | – | – | – | 10000 | – | – | – | – | Cable with flying leads | – | – | – | 3VDC (TTL10kHz, optional) | 5VDC(TTL30kHz or Analog 0-3V,0-5V, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | – | – | – | Datasheet |
| PGL-FP-940 | 940 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-940 | 940 nm | 1~1500 mW | – | Multimode | – | – | <10 | – | – | – | – | 10000 | – | – | – | – | 9 pin connector | – | – | – | – | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | Datasheet |
| PGL-V-H-FC-940 | 940 nm | 1~1000 mW | – | Multimode | – | – | <10 | – | – | – | – | 10000 | – | – | – | – | 9 pin connector | – | – | – | – | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | Datasheet |
Infrared Laser, 975 NM Infrared Diode Lasers, High Power Diode Laser System.
17 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | Transverse mode | Operating temperature (℃) | Fiber type | DIODE LASER AT 975nm Fiber Core diameter | Fiber connector | long lifetime, cost-effectiveness and Fiber jacket | Modulation option | monitoring, | Operating voltage (VDC) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-975 | 975 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-975L | 975 nm | 1~200 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-975 | 975 nm | 1~2500 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-975 | 975 nm | 2.5~5 W | – | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-975 | 975 nm | 5~8 W | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | Multimode | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-975-SM | 975 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-975 | 975 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-975 | 975 nm | 1~50 mW | <2%, <1%, <0.5% | <1%, <0.5% | ~1.5 | <1.0 | <5 | – | – | >10000 | – | Near TEM00 | 10-35 | – | – | – | – | AMOD (Analog) DC-100kHz | inspection | 12V/4A | – | – | – | – | – | – | – | Datasheet |
| MDL-III-975L | 975 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Near TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-975R | 975 nm | 1~500 mW | <3%, <2%, <1% | – | – | ~10 / ~20 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Round | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-975 | 975 nm | 1~2500 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-975 | 975 nm | 2.5~5 W | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-975 | 975 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-975 | 975 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-975-SM | 975 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-975 | 975 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-975 | 975 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | Datasheet |
Infrared Laser, 980 NM Infrared Diode Lasers, High Power Diode Laser System.
16 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Cooled method | Operating temperature (℃) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Modulation option | Power Stability (rms, 4 hours ± 3°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-980 | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-980L | 980 nm | 1~200 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Near TEM00 | Conduction | – | – | – | – | – | – | – | Datasheet |
| MLL-III-980 | 980 nm | 1~2500 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | Datasheet |
| MLL-H-980 | 980 nm | 2.5~5 W | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | Datasheet |
| MLL-F-980 | 980 nm | 5~8 W | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | 10-35 | – | – | – | – | – | – | Datasheet |
| MLL-III-980-SM | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | Datasheet |
| TEM-F-980 | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-980 | 980 nm | 1~50 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980L | 980 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Conduction | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980R | 980 nm | 1~500 mW | <3%, <2%, <1% | – | – | ~10 / ~20 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Round | Conduction | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980 | 980 nm | 1~2500 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | Datasheet |
| MDL-H-980 | 980 nm | 2.5~5 W | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | Datasheet |
| MDL-F-980 | 980 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-980 | 980 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-SN-980 | 980 nm | 6~12 W | – | – | – | <3.0 | <5 | 10-35 | – | >10000 | Multimode | – | – | – | – | – | – | – | <2%, <1%, (<0.5% optional) | Datasheet |
| MDL-III-980-SM | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | Datasheet |
RED Laser, 633 NM RED Laser, HE NE Laser |
11 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-633(FC) | 633 nm | 1~70 mW | – | – | – | – | – | – | – | – | – | – | |
| FC-633 | 633 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-633 | 633 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | |
| TEM-LN-633 | 633 nm | 1~30 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | Datasheet |
| MLL-III-633L | 633 nm | 1~100 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Near TEM00 | Conduction | Datasheet |
| MLL-III-633-SM | 633 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | – | |
| TEM-F-633 | 633 nm | 1~30 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | Datasheet |
| MDL-III-633L | 633 nm | 1~100 mW | <2%, <1%, <0.5% | – | <1.5 / <1.2 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Conduction | Datasheet |
| MDL-III-633-SM | 633 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-633 | 633 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | – | |
| PGL-FP-633 | 633 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – |
639 NM RED Solid State Laser.
14 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing stability over temperature (μrad/°C) | Cooled method (water cooled) | Power stability (rms, 4 hours , ±3°C) | Spectral line width (MHz) | Beam divergence (mrad) | Polarization ratio | Operating voltage (VDC) | Power stability (rms, 4 hours±3℃) | Noise of amplitude (rms, 1Hz-20MHz) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Cooled method (Water Cooled) | M2 | Beam diameter at the aperture (1/e2, mm) | Pointing stability after warm-up (mrad) | Operating Temperature (°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-639 | 639 nm | 1~650 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <10 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-639 | 639 nm | 650~3000 mW | TEM00 | Single | <5MHz | – | <15 | – | – | 20-30 | PSU-W-FDA | >10000 | <8 | WCH-580 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-DU-639-W | 639 nm | 1~750 mW | TEM00 | Single | – | <1%, <0.5% | <30 | <8 | – | 10-35 | PSU-SR | >10000 | – | WCH-580 | <3%, <2%, <1% | <1MHz | <1.5 | >100:1, Horizontal (Vertical optional) | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-639 | 639 nm | 1~1500 mW | TEM00 | – | – | – | <5 | <8 | – | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-DP-639-A | 639 nm | 1500~2000 mW | Near TEM00 | – | <0.1, <0.003 | – | <10 | – | – | – | PSU-DP-A | >10000 | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | <3%, <2%, <1% | <1% | <1.2 | Air Cooled | 10-35 | – | – | – | – | – | – | Datasheet |
| MLL-DP-639-B | 639 nm | 2000~8000 mW | Near TEM00 (TEM00 optional) | – | <0.003, <0.01, <0.1 | <1% | <10 | – | – | – | PSU-W-FDA | >10000 | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | <3%, <2%, <1% | – | <3.0 | – | 10-35 | WCH-580 | – | – | – | – | – | Datasheet |
| MRL-U-639-SU | 639 nm | 1~800 mW | TEM00 | – | – | – | <5 | – | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | <2%, <1%, <0.5% | – | <1.5 | – | – | – | <1.2, <1.1 | <1.0 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-FN-639 | 639 nm | 800~1800 mW | TEM00 | – | – | – | <5 | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | <1.2 | – | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-FN-639-H | 639 nm | 1.8~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-639-A | 639 nm | 3~4 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | – | 10-35 | PSU-DP-A | >10000 | – | – | – | – | – | – | – | <3%, <2%, <1% | – | – | Air Cooled | – | – | – | <3.0 | – | – | – | Datasheet |
| MRL-DP-639-B | 639 nm | 4~10 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | – | – | – | – | – | – | – | <3%, <2%, <1% | – | – | – | 10-35 | WCH-580 | – | ~3.0 | – | – | – | Datasheet |
| MRL-DP-639-C | 639 nm | 10~17 W | Multi mode | – | – | – | <10 | – | – | – | – | >10000 | – | – | – | – | – | – | 12V/ 25A | <3%, <2%, <1% | – | <5.0 | – | 10-35 | WCH-580 | – | ~3.0 | – | – | – | Datasheet |
| MRL-FN-639-SM | 639 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-D-639 | 639 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
640 NM RED Diode Laser.
30 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability after warm-up (mrad) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Operating temperature (°C) | Cooled method | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | Spectral line width (nm) | Noise of amplitude (rms, 1Hz-20MHz) | Operating temperature (℃) | Cooled method (Water Cooled) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-640(Line) | 640 nm | 1~4000 mW | <2%, <1%, <0.5% | TEM00 | <1.2, <1.1 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-640(FC) | 640 nm | 1~10000 mW | <2%, <1%, <0.5% | TEM00 | <1.2, <1.1 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-640 | 640 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-640 | 640 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-LN-640 | 640 nm | 1~100 mW | – | – | <1.1 | – | <1.5 | – | <5 | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | 25±3 | – | – | – | – | – | – | – | Datasheet |
| MLL-III-640 | 640 nm | 1~200 mW | – | Near TEM00 | <1.5 / <1.2 | – | <1.0 | – | <5 | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | 10-35 | Conduction | – | – | – | – | – | – | Datasheet |
| MLL-FN-640 | 640 nm | 1~1500 mW | – | TEM00 | – | – | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | – | PSU-H-FDA | >10000 | – | – | 10-35 | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | Datasheet |
| MLL-DP-640-A | 640 nm | 1.5~2 W | <3%, <2%, <1% | Near TEM00 | – | – | <1.2 | >100:1, Horizontal (Vertical optional) | <10 | – | – | – | PSU-DP-A | >10000 | – | – | – | Air Cooled | – | – | <0.1, <0.003 | <1% | 10-35 | – | Datasheet |
| MLL-DP-640-B | 640 nm | 2~8 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | – | – | <3.0 | >100:1, Horizontal (Vertical optional) | <10 | – | – | – | PSU-W-FDA | >10000 | – | <1% | – | – | – | – | <0.003, <0.01, <0.1 | – | 10-35 | WCH-580 | Datasheet |
| MLL-III-640-SM | 640 nm | 1~100 mW | – | Near TEM00 | <1.5 / <1.2 | – | <1.0 | – | <5 | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | 10-35 | Conduction | – | – | – | – | – | – | Datasheet |
| TEM-F-640 | 640 nm | 1~100 mW | – | – | <1.1 | – | <1.5 | – | <5 | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <2%, <1%, <0.5% | – | 25±3 | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-640 | 640 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-640 | 640 nm | 1~200 mW | – | – | <1.5 / <1.2 | – | <1.0 | – | <5 | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <2%, <1%, <0.5% | – | 10-35 | Conduction | – | – | – | – | – | – | Datasheet |
| DL-MD-640 | 640 nm | 1~2000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| DL-HD-640 | 640 nm | 2~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-640-SM | 640 nm | 1~100 mW | – | – | <1.5 / <1.2 | – | <1.0 | – | <5 | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <2%, <1%, <0.5% | – | 10-35 | Conduction | – | – | – | – | – | – | Datasheet |
| MRL-U-640-SU | 640 nm | 1~800 mW | <2%, <1%, <0.5% | TEM00 | <1.2, <1.1 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-640 | 640 nm | 800~1800 mW | – | TEM00 | <1.2 | – | <1.5 | – | <5 | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-640-A | 640 nm | 3~4 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | – | <3.0 | – | – | <10 | – | – | – | PSU-DP-A | >10000 | – | – | 10-35 | Air Cooled | – | – | – | – | – | – | Datasheet |
| MRL-DP-640-B | 640 nm | 4~10 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | – | ~3.0 | – | – | <10 | – | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | 10-35 | WCH-580 | Datasheet |
| MRL-DP-640-C | 640 nm | 10~17 W | <3%, <2%, <1% | Multi mode | – | ~3.0 | <5.0 | – | <10 | – | – | – | – | >10000 | – | – | – | – | – | 12V/ 25A | – | – | 10-35 | WCH-580 | Datasheet |
| MRL-FN-640-SM | 640 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-640 | 640 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-D12-640 | 640 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-D8-640 | 640 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-FS-640 | 640 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-H-640 | 640 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-640 | 640 nm | 1~130 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-V-H-640 | 640 nm | 1~800 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-640 | 640 nm | 1~120 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
655 NM RED Diode Laser.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-C-655 | 655 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-655L | 655 nm | 1~180 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MLL-III-655 | 655 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-XS-655 | 655 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-655L | 655 nm | 1~180 mW | <2%, <1%, <0.5% | – | – | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-III-655R | 655 nm | 1~200 mW | <3%, <2%, <1% | Round | – | – | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-III-655 | 655 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-MD-655 | 655 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-HD-655 | 655 nm | 1.5~3 W | <2%, <1%, <0.5% | Multimode | – | – | ~2.5×2.5 | <5 | – | – | PSU-N-FDA/PSU-N-LED | >10000 | Horizontal+ Vertical | 25±3 | Datasheet |
| MDL-XD-655 | 655 nm | 3~4.5 W | – | – | – | – | – | – | – | – | – | – | – | – |
730 NM RED Diode Laser.
13 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating voltage(internal PCB) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of internal PCB | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-730(FC) | 730 nm | 1~1200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-730 | 730 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-730 | 730 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-730L | 730 nm | 1~30 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-730 | 730 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-730-SM | 730 nm | 1~15 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-730 | 730 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-730L | 730 nm | 1~30 mW | <2%, <1%, <0.5% | – | – | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-730 | 730 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-730-SM | 730 nm | 1~15 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-730 | 730 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-730 | 730 nm | 1~20 mW | – | Near TEM00 | – | – | <1 | – | – | – | – | 10000 | 3VDC | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | mm2 / Φ12×50 | – | – | – | – | – | – | Datasheet |
| PGL-V-H-730 | 730 nm | 1~1500 mW | – | Multimode | – | – | <5 | – | – | – | – | 10000 | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | Datasheet |
770 NM RED Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MSL-T-770 | 770 nm | 1~300 mW |
Yellow Laser, 589 NM Yellow DPSS Lasers.
15 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Fiber numerical aperture | Fiber type | Noise of amplitude (rms, 20Hz-20MHz) | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | Shock tolerance (6ms) | Operating temperature (℃) | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | lifetime | instrument, etc. Operating temperature (℃) | Modulation option | Power supply (5VDC) | Storage temperature (℃) | Warranty (years) | Operating voltage(internal PCB) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of PGL-VI-589 | Dimensions of PGL-VI-1-589 | Power supply | TTL modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-589 | 589 nm | 1~200 mW | <3%, <2%, <1% | <0.1, <0.003 | TEM00 | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-589 | 589 nm | 200-300 mW | <3%, <2%, <1% | – | TEM00 | – | <1.5 | – | – | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-589-SM | 589 nm | 1~100 mW | – | – | TEM00 (single mode fiber output) | <1.1 | – | – | – | <10 | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | 0.10-0.15 | SM fiber (PM fiber optional) | <1% | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-S-589 | 589 nm | 1~50 mW | <3%, <2%, <1%, (<0.5% optional) | – | TEM00 | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | – | PSU-A-D/ PSU-A-F | – | >10000 | – | – | – | – | – | – | – | 7g laterally, 15g vertically | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-U-589 | 589 nm | 1~200 mW | <3%, <2%, <1% | – | TEM00 | – | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | PSU-SR-OEM(12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-F-589 | 589 nm | 1~300 mW | – | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-589 | 589 nm | 300~800 mW | – | – | – | – | – | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-589 | 589 nm | 300~500 mW | – | – | Near TEM00 | <3.0 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | >10000 | – | – | – | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | <1.5 | Pointing Stability Over Temperature (urad/°C) / <20 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-V-589-Water | 589 nm | 500~1500 mW | – | – | TEM00 | <1.2 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | >10000 | – | – | – | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | <1 | Pointing Stability Over Temperature (urad/°C) / <20 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-W-589A | 589 nm | 1500~7000 mW | – | – | Near TEM00 | – | ~4.0 | – | – | – | – | – | PSU-W-LED | – | >10000 | – | – | – | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | <2.0 | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optiona | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-S-589-SM | 589 nm | 1~20 mW | – | – | TEM00 (single mode fiber output) | <1.1 | – | – | – | <10 | – | 10-35 | PSU-III-FDA/PSU-III-LED | – | >10000 | 0.10-0.12 | SM fiber (PM fiber optional) | – | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | PSU-A-F-OEM (5V/5A) | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-S-589-MD | 589 nm | 1~800 mW | – | – | TEMn1 | – | – | – | – | <10 | – | – | – | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 0-60 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-589 | 589 nm | 1~20 mW | – | – | TEM00 | – | – | – | – | – | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | 1 | 3VDC | Cable with flying leads | 10°C to 35°C | -20°C to 80°C | <90%, non-condensing | Φ20×100mm2 | Φ15×65mm2 | – | – | – | Datasheet |
| PGL-H1-589 | 589 nm | 1~50 mW | – | – | TEM00 | – | – | – | – | – | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | 15~30 | – | – | <15 | – | – | – | – | – | – | – | – | – | – | – | – | – | DC 3V PCB / DC 5V PCB | Optional, 1Hz-1KHz, 1KHz-10KHz, or higher on request | 6 months | Datasheet |
| PGL-VI-FC-589 | 589 nm | 1~50 mW | – | – | TEM00 | – | – | – | – | – | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | 1 | 3VDC | Cable with flying leads | 10°C to 35°C | -20°C to 80°C | <90%, non-condensing | Φ20×100mm2 | Φ15×65mm2 | – | – | – | Datasheet |
594 NM Yellow Orange Laser.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam divergence (mrad) | Polarization ratio | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | M2 | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-FN-594 | 594 nm | 1~50 mW | <3%, <2%, <1% | TEM00 | <1.5 | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-594 | 594 nm | 1~100 mW | – | – | – | <5 | <8 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | <1.5 | >100:1, Horizontal (Vertical optional) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-W-594A | 594 nm | 100~800 mW | – | Near TEM00 | – | <10 | – | 10-35 | PSU-W-LED | – | >10000 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | <5%, <3%, (<2% optional) | <2.0 | – | – | Datasheet |
| MGL-U-594-SF | 594 nm | 800~1500 mW | – | TEM00 | – | <10 | – | – | PSU-SF | – | >10000 | – | – | – | – | – | ~3.0 | Air Cooled/ Water Cooled | Datasheet |
| PGL-H1-594 | 594 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
1710 NM IR Laser, Infrared Diode Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-1710 | 1710 nm | 1~1300 mW | |
| MDL-1710(FC) | 1710 nm | 1~430 mW |
410 NM Blue Violet Diode Laser.
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-410 | 410 nm | 1~10 W | |
| MDL-410(FC) | 410 nm | 1~250 mW |
415 NM Blue Violet Diode Laser.
4 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-415 | 415 nm | 1~5 W | |
| MDL-415(FC) | 415 nm | 1~250 mW | |
| MDL-III-415 | 415 nm | 1~300 mW | |
| MDL-III-415L | 415 nm | 1~100 mW |
440 NM Laser, Violet Blue Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-440 | 440 nm | 1~20 W | |
| MDL-440(FC) | 440 nm | 1~2500 mW |
660 NM RED Laser.
5 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-660 | 660 nm | 1~360 mW | |
| MLL-FN-660 | 660 nm | 1~200 mW | |
| MRL-660(FC) | 660 nm | 1~1800 mW | |
| MRL-FN-660 | 660 nm | 1~500 mW | |
| MRL-W-660A | 660 nm | 500~2000 mW |
740 NM RED Diode Laser.
4 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-740 | 740 nm | 1~5 W | |
| MDL-740(FC) | 740 nm | 1~2000 mW | |
| MDL-H-740 | 740 nm | 1~1000 mW | |
| MDL-XF-740 | 740 nm | 1~2.5 W |
755 NM RED Laser, RED Diode Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-755 | 755 nm | 1~10 W | |
| MDL-755(FC) | 755 nm | 1~2600 mW |
FC D Series Laser for Raman Spectroscopy |
4 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Fiber core diameter | Fiber connector | Fiber jacket | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-D-410 | 410 nm | 1~100 mW | 0.1 nm, (0.06 optional) | <3%, <2%, <1% | <1% | 100µm, 0.22 NA | SMA905, FC/PC optional | Metal, PVC optional | <5 | Air cooled | 20-30 | 5V/6A | >10000 | Datasheet |
| FC-D-488 | 488 nm | 1~70 mW | 0.1 nm, (0.06 optional) | <3%, <2%, <1% | <1% | 100µm, 0.22 NA | SMA905, FC/PC optional | Metal, PVC optional | <5 | Air cooled | 20-30 | 5V/6A | >10000 | Datasheet |
| FC-D-514.5 | 514.5 nm | 1~20 mW | 0.1 nm, (0.06 optional) | <3%, <2%, <1% | <1% | 100µm, 0.22 NA | SMA905, FC/PC optional | Metal, PVC optional | <5 | Air cooled | 20-30 | 5V/6A | >10000 | Datasheet |
| FC-D-660 | 660 nm | 1~200 mW | 0.1 nm, (0.06 optional) | <3%, <2%, <1% | <1% | 100µm, 0.22 NA | SMA905, FC/PC optional | Metal, PVC optional | <5 | Air cooled | 20-30 | 5V/6A | >10000 | Datasheet |
Ultra Compact OEM Laser,405 NM 1319 NM OEM Laser |
20 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Fiber type | Fiber connector | Spectral line width (nm) | Fiber Core diameter | Fiber length | Fiber jacket | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | Transverse mode | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Power supply (12VDC) | Storage temperature (℃) | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Modulation option | Fiber Jacket | Operating temperature (℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-1064-A | 1064 nm | 500 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-1064-B | 1064 nm | 1000 mW | – | <2%, <1%, <0.5% | – | – | MM fiber | SMA905, FC/PC optional | <0.2, (<0.1 optional) | 105μm, 0.22NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-460 | 460 nm | 50 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-488 | 488 nm | 150 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-514.5 | 514 nm | 10 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-637 | 637 nm | 100 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-660 | 660 nm | 80 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-670 | 670 nm | 80 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-680 | 680 nm | 20 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-685 | 685 nm | 20 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-705 | 705 nm | 15 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-880 | 880 nm | 2 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-905 | 905 nm | 400 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-I-532 | 532 nm | 1-5000 mW | – | <3%, <2%, (<1% optional) | – | – | – | – | – | – | – | – | – | – | – | – | >10000 | Near TEM00 | ~1.0 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | PSU-OEM-I / PSU-I-HS | – | – | – | – | – | – | – | – | Datasheet |
| OEM-S-561-MD | 561 nm | 1-800 mW | – | <5% (<1% optional) | – | – | – | – | – | – | – | – | <10 | – | – | – | >10000 | TEMn1 | – | – | – | – | 0-60 | – | – | – | – | – | – | – | Datasheet |
| OEM-S-588-MD | 588 nm | 1-800 mW | – | <5% (<1% optional) | – | – | – | – | – | – | – | – | <10 | – | – | – | >10000 | TEMn1 | – | – | – | – | 0-60 | – | – | – | – | – | – | – | Datasheet |
| YL-I-638/520/450/808/1064 | 638 nm | 74 W | – | <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | >10000 | – | – | – | – | – | -20-50 | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| YL-I-638/520/450/808/980 | 638 nm | 71 W | – | <2%, <1% | – | – | – | – | – | – | – | – | – | Air cooled | – | – | >10000 | – | – | – | – | – | -20-50 | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PVC, Metal optional | – | – | Datasheet |
| YL-I-640 | 640 nm | 8 W | 2 nm | <2%, <1% | 0.5% | – | – | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | – | – | – | – | – | – | 100, 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | – | PVC, Metal optional | 0-30 | 100-240 | Datasheet |
| YL-I-660 | 660 nm | 8 W | 2 nm | <2%, <1% | 0.5% | – | – | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | – | – | – | – | – | – | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | – | PVC, Metal optional | 0-30 | 100-240 | Datasheet |
505 NM Green Laser, Diode Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber length | Fiber jacket | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-505 | 505 nm | 1~30 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | 0.8m | 0.9mm PVC | ~1.1 | <5 | Conduction | 10-35 | 5V | >10000 | Datasheet |
| MDL-III-505L | 505 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XS-G-505/SM/1-2/50 | 505 nm | >10 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-U-505-SF | 505 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-505L | 505 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – |
High Power Laser Diode Module |
93 models| Model | Wavelength | Output / average power | Operating Voltage | Fiber Core Diameter | Fiber Length | Fiber Connector | Operating Temperature | Operating Relative Humidity | Cooling Mode | Storage Temperature | Storage Relative Humidity | Lead Soldering Temperature（10 s max） | Fiber Cladding Diameter | Fiber Buffer Diameter | Main power supply port | Operating Voltage（Simplex） | Fiber Armor | Lead Soldering Temperature (10 s max) | Weight | Lead Soldering Temperature, 10 s max | Soldering | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LDM-1064-100-2 | 1064 nm | 100 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1064-10-2 | 1064 nm | 10 W | - / 1.7 / - / V | - / 200 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1064-30-2 | 1064 nm | 30 W | - / 5 / - / V | 200 / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1064-976-808-2 | 1064 nm | 10/ 10 W/ 10 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1064-980-915-808-640-450-4 | 1064 nm | 15/ 15 W/ 15/ 15/ 0. 5/ 6 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-10-2 | 1470 nm | 10 W | 5.3 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | 220 | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-15-2 | 1470 nm | 15 W | 9.5 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | 220 | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-30-2 | 1470 nm | 30 W | - / 21.0 / 22.0 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 10 / 40 | - / 75 / % | – | -20 / 80 | - / 90 / % | - / 250 / ℃ | 220 | 500 | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-50-2 | 1470 nm | 50 W | - / 20.2 / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | – | -20 / 80 / ℃ | - / 90 / % | - / 250 | 220 | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-5-2 | 1470 nm | 5 W | - / 3.26 / - / V | 200 / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 220 / - / μm | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-980-2 | 1470 nm | 30/ 30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-980-635-2 | 1470 nm | 15/ 15 W/ 0.2 | – | m | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-980-640-2 | 1470 nm | 15/ 18 W/ 0.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1550-10-2 | 1550 nm | 10 W | - / 8.6 / - / V | - / 200 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1550-15-2 | 1550 nm | 15 W | 12 / V | 200 / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1940-15-2 | 1940 nm | 15 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-100-6 | 405 nm | 100 W | – | 600 / μm | 2 / m | SMA905-SMA905 / - | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-10-2 | 405 nm | 10 W | - / 17.2 / - / V | - / 200 / - / μm | - / 1-5 / - / m | – | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 220 / - / μm | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-150-8 | 405 nm | 150 W | – | 800 / μm | 2 / m | Fixed-SMA905 / - | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-16-2 | 405 nm | 16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-20-4 | 405 nm | 20 W | – | 400 / μm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-24-4 | 405 nm | 24 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-30-4 | 405 nm | 30 W | – | 400 / μm | – | SMA905 / - | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-50-6 | 405 nm | 50 W | – | 600 / μm | 2 / m | SMA905-SMA905 / - | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-60-6 | 405 nm | 60 W | – | 600 / μm | 2 / m | SMA905-SMA905 / - | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-8-2 | 405 nm | 8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-100-1 | 450 nm | 100 W | – | 105 / μm | - / 2.5 / - / m | - / SMA905/ D80/ QBH / - / - | 15 / 35 | - / 75 / % | – | -20 / 50 | – | – | – | – | Monitor port / Indication light | - / 33 / - / V | - / Optional / - / - | - / 250 / ℃ | 3.8 / kg | – | – | Datasheet |
| LDM-450-10-1 | 450 nm | 10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-15-1 | 450 nm | 15 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-200-2 | 450 nm | 200 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-30-1 | 450 nm | 30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-3-1 | 450 nm | 3 W | 4.8 / V | 105 / μm | - / 1-5 / - / m | – | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-450-40-1 | 450 nm | 40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-50-0.5 | 450 nm | 50 W | – | 50 / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | – | -20 / 50 | – | – | – | – | – | - / 36 / - / V | - / Optional / - / - | - / 250 | – | – | – | Datasheet |
| LDM-520-10-1 | 520 nm | 10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-520-20-2 | 520 nm | 20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-520-40-2 | 520 nm | 40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-520-4-1 | 520 nm | 4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-520-70-4 | 520 nm | 70 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-520-7-1 | 520 nm | 7 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-10-2 | 638 nm | 10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-20-2 | 638 nm | 20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-2.5-1 | 638 nm | 2.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-30-4 | 638 nm | 30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-40-4 | 638 nm | 40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-5-1 | 638 nm | 5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-7-1 | 638 nm | 7 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-10-2 | 660 nm | 10 W | - / 16.5 / - / V | - / 200 / - / μm | 1-5 / m | – | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 220 / - / μm | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-660-15-2 | 660 nm | 15 W | - / 18.6 / - / V | - / 200 / - / μm | 1-5 / m | – | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 220 / - / μm | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-660-3-2 | 660 nm | 3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-6-2 | 660 nm | 6 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-8-2 | 660 nm | 8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-793-10-1 | 793 nm | 10 W | - / 3.8 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | – | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-793-20-1 | 793 nm | 20 W | - / 7.6 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | – | -20 / 80 | - / 90 / % | – | - / 125 / - / μm | - / 250 / - / μm | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-793-30-1 | 793 nm | 30 W | - / 11.3 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | – | -20 / 80 | - / 90 / % | – | - / 125 / - / μm | - / 250 / - / μm | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-793-50-1 | 793 nm | 50 W | 22.7 / V | - / 105 / - / μm | - / 1-5 / - / m | SMA905 / - | 15 / 35 | - / 75 / % | – | -20 / 80 / ℃ | - / 90 / % | – | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | - / 250 | – | Datasheet |
| LDM-793-5-1 | 793 nm | 5 W | - / 1.9 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | – | -20 / 80 | - / 90 / % | - / 250 | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-793-90-1 | 793 nm | 90 W | - / 34 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | – | -20 / 80 | - / 90 / % | – | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | - / 250 / ℃ | – | Datasheet |
| LDM-808-100-4 | 808 nm | 100 W | - / 15 / - / V | - / 400 / - / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 440 | - / 700 | – | – | – | – | – | – | – | Datasheet |
| LDM-808-14-4 | 808 nm | 14 W | - / 3.6 / - / V | - / 400 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | 440 | - / 700 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-808-200-4 | 808 nm | 200 W | - / 28.8 / - / V | - / 400 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 440 / - / μm | - / 700 / - / μm | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-808-20-4 | 808 nm | 20 W | - / 5.58 / - / V | - / 400 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | 440 | - / 700 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-808-300-2 | 808 nm | 300 W | – | – | – | – | – | – | thermal conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-808-30-4 | 808 nm | 30 W | - / 7.1 / - / V | - / 400 / - / μm | – | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 440 / - / μm | - / 700 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-808-4.5-1 | 808 nm | 4.5 W | - / 1.8 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | – | -20 / 80 | - / 90 / % | - / 250 / ℃ | 125 | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-808-500-8 | 808 nm | 500 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-808-50-4 | 808 nm | 50 W | - / 11.1 / - / V | - / 400 / - / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 440 / - / - | - / 700 | – | – | – | – | – | – | – | Datasheet |
| LDM-878.6VBG-100-2 | 878 nm | 100 W | - / 15.8 / 18.0 / V | - / 200/400 / - / μm | - / 1-5 / - / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-878.6VBG-120-2 | 878 nm | 120 W | - / 21.1 / 24.0 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | – | 220 | - / 500 / - / μm | – | – | – | – | – | – | Temperature(10 / s | Datasheet |
| LDM-878.6VBG-180-4 | 878 nm | 180 W | - / 28.5 / - / V | - / 400 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 440 / - / μm | - / 700 / - / μm | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-878.6VBG-30-2 | 878 nm | 30 W | - / 5.3 / 6.0 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 220 / - / μm | 500 | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-878.6VBG-40-2 | 878 nm | 40 W | – | - / 200 / - / μm | - / 1-5 / - / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 220 / - / μm | 500 | – | – | – | - / 250 | – | – | – | Datasheet |
| LDM-878.6VBG-70-2 | 878 nm | 70 W | - / 12.3 / 14.0 / V | - / 200 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | – | 220 | 500 | – | – | – | – | – | – | Temperature / (10 / s | Datasheet |
| LDM-915-100-2 | 915 nm | 100 W | 12.25 / V | – | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-915-150-4 | 915 nm | 150 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-915-200-4 | 915 nm | 200 W | - / 22.4 / 25.0 / V | - / 400 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 440 / - / μm | - / 700 / - / μm | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-915-300-2 | 915 nm | 300 W | - / 29.7 / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 220 / - / μm | 500 | – | – | – | – | – | – | – | Datasheet |
| LDM-915-30-2 | 915 nm | 30 W | 3.4 / V | - / 200 / - / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-915-50-2 | 915 nm | 50 W | - / 8.7 / - / V | - / 200 / - / μm | - / 1-5 / - / m | – | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-940-100-2 | 940 nm | 100 W | - / 15.4 / - / V | - / 200 / - / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 220 / - / μm | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-940-170-1 | 940 nm | 170 W | 32 / V | 105 / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | – | - / 125 / - / - | 250 / - | – | – | – | – | – | – | – | Datasheet |
| LDM-940-200-2 | 940 nm | 200 W | 31 / V | 200 / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 220 / - / μm | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-940-80-1 | 940 nm | 80 W | - / 14.4 / - / V | - / 105 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-976VBG-100-1 | 976 nm | 100 W | - / 24.2 / 24.8 / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | – | 125 | 250 | – | – | – | – | – | – | – | Datasheet |
| LDM-976VBG-140-1 | 976 nm | 140 W | - / 28.9 / 29.5 / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | – | 125 | 250 | – | – | – | – | – | – | – | Datasheet |
| LDM-976VBG-30-1 | 976 nm | 30 W | 7.2 / V | 105 / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-976VBG-60-1 | 976 nm | 60 W | - / 12 / V | - / 105 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-976VBG-9-1 | 976 nm | 9 W | 1.62 / V | 105 / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-980-100-2 | 980 nm | 100 W | 13.6 / V | 200 / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-980-200-4 | 980 nm | 200 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-980-300-2 | 980 nm | 300 W | - / 28.5. / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 220 / - / μm | 500 | – | – | – | – | – | – | – | Datasheet |
| LDM-980-30-2 | 980 nm | 30 W | - / 5.1 / - / V | – | - / 1-5 / - / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-980-50-2 | 980 nm | 50 W | - / 8.5 / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | – | – | – | – | – | – | – | – | – | Datasheet |
Long Coherence Length MDL C Series Diode Lasers |
5 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-C-488 | 488 nm | 1~70 mW | <3%, <2%, <1% | <1.5 | Near TEM00 | <5 | Conduction | 20-30 | PSU-A-D | >10000 | Datasheet |
| MDL-C-514.5 | 514.5 nm | 1~20 mW | <3%, <2%, <1% | <1.5 | Near TEM00 | <5 | Conduction | 20-30 | PSU-A-D | >10000 | Datasheet |
| MDL-C-635 | 635 nm | 1~50 mW | <3%, <2%, <1% | <1.5 | Near TEM00 | <5 | Conduction | 20-30 | PSU-A-D | >10000 | Datasheet |
| MDL-C-637 | 637 nm | 1~50 mW | <3%, <2%, <1% | <1.5 | Near TEM00 | <5 | Conduction | 20-30 | PSU-A-D | >10000 | Datasheet |
| MDL-C-660 | 660 nm | 1~80 mW | <3%, <2%, <1% | <1.5 | Near TEM00 | <5 | Conduction | 20-30 | PSU-A-D | >10000 | Datasheet |
420nm Violet Blue Laser, Diode Laser, Violet Laser |
3 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-H-420 | 420 nm | 500~1300 mW | |
| MDL-III-420 | 420 nm | 1~500 mW | |
| MDL-III-420L | 420 nm | 1~100 mW |
660 NM RED Diode Laser.
12 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber length | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-HD-660 | 660 nm | 1.5~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660D | 660 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660L | 660 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660R | 660 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660-SM | 660 nm | 1~80 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, SMA905 optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-MD-660 | 660 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-660 | 660 nm | 3~4.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-660D | 660 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-660L | 660 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-660-SM | 660 nm | 1~80 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | 1m | Datasheet |
| PGL-F-660 | 660 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-660 | 660 nm | 1~130 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Diode MDL XS Series Lasers |
2 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | monitoring, | Operating temperature (℃) | Operating voltage (VDC) | Modulation option | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XS-635 | 635 nm | 1~100 mW | <2%, <1%, <0.5% | <1.2 | Near TEM00 | <1%, <0.5% | <1.0 | <5 | inspection | 10-35 | 12V/4A | AMOD (Analog) DC-100kHz | >10000 | Datasheet |
| MDL-XS-660 | 660 nm | 1~80 mW | <2%, <1%, <0.5% | <1.2 | Near TEM00 | <1%, <0.5% | <1.0 | <5 | inspection | 10-35 | 12V/4A | AMOD (Analog) DC-100kHz | >10000 | Datasheet |
High Stability 532nm Laser |
14 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Beam diameter at the aperture (1/e2, mm) | Cooled method | Pointing Stability Over Temperature (urad/°C) | Operating temperature (°C) | Power supply | Expected lifetime (hours) | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VDC) | Spectral linewidth (nm) | M2 | Polarization ratio | Power supply (100-240VAC) | Modulation optional | Power supply (12VDC) | Warm-up Time (minutes) | Operating temperature(℃) | Power supply (90-264VAC) | Beam divergence (mrad) | Shock tolerance (6ms) | Pointing stability over temperature (μrad/°C) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-D-532 | 532 nm | 20~35 W | <1% | 10 | Near TEM00 | <1.5 | ~4.0 | Air Cooled | <20 | 10-35 | PSU-DEP-W | ＞10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-D-532-C | 532 nm | 45~75 W | <1% | <1.2 | TEM00 | <1.5 | – | Water cooled | – | – | – | >10000 | <10 | 10-35 | 36V/13.9A | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-F-532 | 532 nm | 1.5~2.5 W | <1% | <1.2 | TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | <0.1 / <0.003 | <1.2,(<1.1 optional) | >100:1, Horizontal(Vertical optional) | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-532 | 532 nm | 1500~4000 mW | <1% | <1.2 | TEM00 | <1.5 | – | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-532-AOM | 532 nm | 150~2000 mW | <1% | – | – | – | <1.5 | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA-AOM/PSU-H-LED-AOM | DC-1MHz;TTL or Analog optional | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | Datasheet |
| MGL-III-532-AOM | 532 nm | 1~150 mW | <1% | <1.2 | TEM00 | <1.5 | – | – | – | – | – | ＞10000 | – | – | – | – | – | >100:1, Vertical (Horizontal Optional) | – | DC-1MHz；TT or Analog optional | – | <5 | 10-35 | PSU-H-FDA-AOM/PSU-H-LED-AOM | – | – | – | – | Datasheet |
| MGL-K-532 | 532 nm | 1~30 W | <0.3% | <1 | TEM00 | ~1.0 | – | Air Cooled / Water Cooled / Conduction | <20 | 10-35 / 25 | – | >10000 | – | – | – | <0. 1 | <1. 1 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-532 | 532 nm | 2.5~5 W | <1% | 3 | Near TEM00 | <1.5 | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | 3-5 | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-532-AOM | 532 nm | 1~4 W | <1% | – | Near TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | PSU-W -LED | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-S-532 | 532 nm | 1~300 mW | <0.5% | <1.2 | TEM00 | – | <1.0 | – | – | – | – | >10000 | <5 | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | <1.5 | 7g laterally, 15g vertically | – | – | Datasheet |
| MGL-U-532 | 532 nm | 300~1500 mW | <0.5% | <1.2 | TEM00 | – | <1.0 | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-SR-OEM (12V/25A) | – | – | – | <1.5 | – | <8 | – | Datasheet |
| MGL-V-532 | 532 nm | 1~10 W | <0.5% | <1.2 | TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-W-LED | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MGL-W-532A | 532 nm | 10~20 W | <1% | – | Near TEM00 | <2.0 | – | – | – | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-W-FDA/PSU-W-LED | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-Z-532 | 532 nm | 30~60 W | <1% | – | Near TEM00 | <2.0 | ~5 | Air Cooled | – | 10-35 | – | >10000 | <10 | – | – | – | – | >1:1, Horizontal(Vertical optional) | PSU-SEP-W | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
THE Manufacturer High Stability 1064nm Laser
7 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Warm-up time (minutes) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Modulation optional | Beam divergence, full angle (mrad) | Pointing stability over temperature (μrad/°C) | Shock tolerance (6ms) | Operating temperature (℃) | Power supply (VDC) | Power supply (36VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-D-1064 | 1064 nm | 10~30 W | <1% | <1.3 | TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Air cooled | 10-35 | PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-H-1064 | 1064 nm | 1.5~3 W | <1% | <1.5 | TEM00 | <5 | – | >100:1, Horizontal (Vertical optional) | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | ~1.2 | <2.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | Datasheet |
| MIL-N-1064 | 1064 nm | 4~5 W | <1% | <3.0 | Near TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | – | – | <1.5 | – | – | – | – | – | Datasheet |
| MIL-S-1064 | 1064 nm | 1~1500 mW | <0.5% | <1.2 | TEM00 | – | – | >100:1, Horizontal (Vertical optional) | – | – | PSU-A-D/PSU-A-F | >10000 | – | <1.7 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | <8 | 7g laterally,15g vertically | 10-35 | PSU-A-F-OEM (5V/5A) | – | Datasheet |
| MIL-T-1064 | 1064 nm | 1~10 W | <1% | <1.2 | TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Air cooled | 10-35 | PSU-W-FDA/PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-U-1064-SU | 1064 nm | 3~4 W | <1% | <1.5 | TEM00 | <5 | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | ~1.0 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | Datasheet |
| MIL-Z-1064 | 1064 nm | 30~60 W | <1% | <1.3 | TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Water cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | – | DRIVER (36V/13.8A) | Datasheet |
THE Manufacturer Miniature OEM Laser Module AT 1064nm
8 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MIL-S-1064-OEM | 1064 nm | 1~1500 mW | |
| PGL-FP-1064 | 1064 nm | 1~10 mW | |
| PGL-FS-1064 | 1064 nm | 1~500 mW | |
| PGL-H1-1064 | 1064 nm | 1~800 mW | |
| PGL-LF-1064 | 1064 nm | 1~10 mW | |
| PGL-V-H-1064 | 1064 nm | 1~800 mW | |
| PGL-V-H-FC-1064 | 1064 nm | 1~1000 mW | |
| S-1064-OEM | 1064 nm | 1~1500 mW |
THE Manufacturer LOW Noise 532nm Laser
5 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | printing, | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | M2 | Cooled method | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (μrad/°C) | Shock tolerance(6ms) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-532 | 532 nm | 1.5~2.5 W | <0.1 nm (<0.003 @1.5 W) | <3%, <2%, <1% | <1% | <1.1 | TEM00 | <1.2 | <10 | <20 | >100:1, Horizontal(Vertical optional) | chip | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-532 | 532 nm | 1.5~2.5 W | <0.1 nm (<0.003 @1.5 W) | <3%, <2%, <1%, <0.5% | <0.5% | – | TEM00 | <1.5 | <5 | – | – | – | 10-35 | PSU-H-FDA | >10000 | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MLL-K-532 | 532 nm | 1~30 W | <0.1 nm | <1%, <0.5%, <0.3%, <2% | <0.1%, <0.3% | <1 | TEM00 | ~1.0 | – | <20 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | 10-35 / 25 | – | >10000 | – | – | <1. 1 | Water Cooled / Conduction | – | – | – | – | Datasheet |
| MLL-S-532 | 532 nm | 1~300 mW | <0.1 nm ( <0.003 @100 mW ) | <3%, <2%, <1%, <0.5% | <0.5% | <1.2 | TEM00 | <1.5 | <5 | – | >100:1, Horizontal (Vertical optional) | – | 10-35 | PSU-A-F | >10000 | – | – | <1.2, <1.1 | – | <1.0 | <8 | 7g laterally, 15g vertically | PSU-A-F (5V/5A) | Datasheet |
| MLL-V-532 | 532 nm | 1~15 W | <0.1 nm | <2%, <1%, <0.5% | <0.5% | <1.3 | TEM00 | ~1.0 | – | <20 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | 10-35 | PSU-W-LED | >10000 | – | – | – | Water Cooled | – | – | – | – | Datasheet |
THE Manufacturer LOW Noise 1064nm Laser
4 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Cooled method | M2 | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (μrad/°C) | Shock tolerance (6ms) | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1064 | 1064 nm | 1500~3000 mW | <0.1 nm | <3%, <2%, <1% | <1% | <1.5 | TEM00 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| MLL-K-1064-OEM | 1064 nm | 20~40 W | <0.1 nm | <2%, <1%, <0.5% | <0.5% | – | TEM00 | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | <10 | 25 | – | – | >10000 | ~1 | <20 | Conduction | – | – | – | – | – | Datasheet |
| MLL-S-1064 | 1064 nm | 1~1500 mW | <0.1 nm | <2%, <1%, <0.5%, <3% | <1% | – | TEM00 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | – | – | – | >10000 | – | – | – | <1.2 | <1.0 | <8 | 7g laterally, 15g vertically | 10-35 | Datasheet |
| MLL-T-1064 | 1064 nm | 1~10 W | <0.02 nm | <2%, <1%, <0.5% | <1% | <1.2 | TEM00 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | 10-35 | PSU-W-FDA/PSU-W-LED | – | >10000 | – | <20 | Air cooled | – | – | – | – | – | Datasheet |
1305nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MLL-III-1305-SM | 1305 nm | 1~15 mW |
1658nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1658-SM | 1658 nm | 1~5 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| TEM-LN-1658 | 1658 nm | 1~5 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1742nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1742-SM | 1742 nm | 1~5 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| TEM-LN-1742 | 1742 nm | 1~5 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
266nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MPL-Q1-266/10uJ | 266 nm | 10 mW |
607 NM Orange Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MRL-U-607-SF | 607 nm | 800~1800 mW |
Compact Laser Module, Small Size Laser Modules |
3 models| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Expected lifetime (hours) | Warranty (years) | Operating voltage(external PCB1) | Connection | Operating temperature | Storage temperature | Humidity | Operating voltage | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PGL-D12 | 405 nm | 1-100 mW | Near TEM00 | <0.5 | 10000 | 1 | 6VDC | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90 %, non-condensing | – | Datasheet |
| PGL-D8 | 405 nm | 1-50 mW | Near TEM00 | <0.5 | 10000 | 1 | 6VDC | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90%, non-condensing | – | Datasheet |
| PGL-H1 | 473 nm | 1-50 mW | – | – | – | – | – | – | – | – | – | 5VDC | Datasheet |
860 NM IR Laser, Infrared Diode Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| PGL-LF-860 | 860 nm | 1~10 mW |
DFB Laser |
6 models| Model | Wavelength | Output / average power | Power stability | M² | Spectral line width (MHz) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Spectral linewidth (MHz) | Operating temperature (℃) | Power supply (85-264VAC) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-F-1278DFB | 1278 nm | 1-10 mW | <2%, <1%, <0.5% | <1.1 | ~3 | TEM00 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | Datasheet |
| TEM-F-1368DFB | 1368 nm | 1-10 mW | <3%, <2%, <1%, <0.5% | <1.1 | – | – | <1.5 | <5 | – | – | 10000 | ~3 | 25+/-3 | PSU-III-LED / PSU-III-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
| TEM-F-1512DFB | 1512 nm | 1-10 mW | <3%, <2%, <1%, <0.5% | <1.1 | – | – | <1.5 | <5 | – | – | 10000 | ~3 | 25+/-3 | PSU-III-LED / PSU-III-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
| TEM-F-1567DFB | 1567 nm | 1-20 mW | <2%, <1%, <0.5% | <1.1 | ~3 | TEM00 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | Datasheet |
| TEM-F-1578DFB | 1578 nm | 1~20 mW | <2%, <1%, <0.5% | <1.1 | ~3 | TEM00 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | Datasheet |
| TEM-F-1579DFB | 1579 nm | 1~5 mW | <2%, <1%, <0.5% | <1.1 | ~3 | TEM00 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | Datasheet |
TEMoo Mode Diode Laser |
12 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-F-1550 | 1550 nm | 1~180 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-F-488 | 488 nm | 1~100 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-F-514.5 | 514 nm | 1~10 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-F-635 | 635 nm | 1~100 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-F-637 | 637 nm | 1~100 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-F-660 | 660 nm | 1~50 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-LN-1550 | 1550 nm | 1~180 mW | <2%, <1%, <0.5% | <1.1 | TEM00 | – | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
| TEM-LN-488 | 488 nm | 1~100 mW | <2%, <1%, <0.5% | <1.1 | TEM00 | – | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
| TEM-LN-514.5 | 514 nm | 1~10 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
| TEM-LN-635 | 635 nm | 1~100 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
| TEM-LN-637 | 637 nm | 1~100 mW | <2%, <1%, <0.5% | <1.1 | TEM00 | – | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
| TEM-LN-660 | 660 nm | 1~50 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
Tunable Laser |
6 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Parameters of customed power supply | Expected lifetime (hours) | noise, | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TUN-390.2~392 | 390 nm | 1~15 mW | <0.1 nm | <3%, <2%, <1% | Near TEM00 | <1.0 | <5 | 20-30 | PSU-TUN | TEC: 7-12kΩ | >10000 | – | – | Datasheet |
| TUN-725~735 | 725 nm | 1~30 mW | <0.1 nm | <3%, <2%, <1% | Near TEM00 | <1.0 | <5 | 20-30 | PSU-TUN | TEC: 7-12kΩ | >10000 | – | – | Datasheet |
| TUN-972~984 | 972 nm | 1~40 mW | <0.1 nm | <3%, <2%, <1% | Near TEM00 | <1.0 | <5 | 20-30 | PSU-TUN | TEC: 7-12kΩ | >10000 | narrow / linewidth, / wavelength / tunable | – | Datasheet |
| TUN-Ti-CW-760~840 | 760 nm | 1~3000 mW | <2 nm | <3%, <2% | – | <4 | <10 | 15-35 | RAD1PS | – | >10000 | – | Water Cooled | Datasheet |
| TUN-TiN-CW-760~840 | 760 nm | 1~2000 mW | <2 pm | <3%, <2% | – | <4 | <10 | 15-35 | RAD1PS | – | >10000 | – | Water Cooled | Datasheet |
| TUN-W-1480~1660 | 1480 nm | 1~2000 mW | <2 nm | <5%, <3% | – | <10 | – | 15-35 | RAD1PS | – | >10000 | – | Air Cooled | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.