Back to Home

Power stability, linewidth, beam quality

MLL-III-845L845 nm near-infrared CW laser

845 nm

The MLL-III-845L is a 845 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Tuning changes the selected output wavelength so spectral features can be scanned with the same source. The tuning band specifies which lines can be reached; linewidth describes the width of the selected line.

Specifications

MLL-III-845L

19 specification rows

Output / average power1~30 mW
Beam / notesTunable wavelength Low Noise Infrared Laser
Operating modeCW
Power stability (rms, 4 hours ± 3°C)<2%, <1%, <0.5%
Transverse modeNear TEM00
Noise of amplitude (rms, 20Hz-20MHz)<1%, <0.5%
M2<1.5
Beam divergence, full angle (mrad)<1.0
Warm-up time (minutes)<5
Cooled methodConduction
Operating temperature (°C)10-35
Power supply (100-240VAC)PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM
Expected lifetime (hours)>10000
Central wavelength (nm)845±10
M²<1.5
Beam diameter at the aperture (1/e2, mm)~4.0
Polarization ratio>10:1, (>50:1 optional) Horizontal±5 degree (Vertical optional)
Beam height from base plate (mm)24.8
Modulation optionDC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional

What do you need?

Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare MLL-III-845L with the closest available models in the CW Lasers family.

Selection parameterMLL-III-845L (current)FC-845MDL-845(FC)
Wavelength845 nm845 nm845 nm
Optical power / pulse energy1~30 mW1~25 mW1~25 mW
Operating mode / pulse widthCW——
Beam quality<1.5——