Power stability, linewidth, beam quality
MLL-H-885885 nm near-infrared CW laser
885 nmThe MLL-H-885 is a 885 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command.
Specifications
MLL-H-885
16 specification rows
| Output / average power | 1~2 W |
|---|---|
| Beam / notes | Laser |
| Central wavelength (nm) | 885±10 |
| Operating mode | CW |
| Power stability (rms, 4 hours ± 3°C) | <2%, <1%, <0.5% |
| Transverse mode | Multimode |
| Noise of amplitude (rms, 20Hz-20MHz) | <1%, <0.5% |
| Beam diameter at the aperture (mm) | ~5×8 |
| Beam divergence, full angle (mrad) | <3.0 |
| Warm-up time (minutes) | <5 |
| Cooled method | Air cooled |
| Beam height from base plate (mm) | 29 |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA/PSU-H-LED |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
| Expected lifetime (hours) | >10000 |
What do you need?
Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MLL-H-885 with the closest available models in the CW Lasers family.
| Selection parameter | MLL-H-885 (current) | MLL-III-885L | MLL-III-885 |
|---|---|---|---|
| Wavelength | 885 nm | 885 nm | 885 nm |
| Optical power / pulse energy | 1~2 W | 1~5 mW | 1~1000 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | Multimode | <1.5 | Multimode |
Related cw lasers
Compare the MLL-H-885 with nearby cw lasers across the wavelength range.
