Measurement
MLL-F-975: Measurement benefits from a stable, focusable source. 975 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (Multimode) informs waist size and propagation.
Power stability, linewidth, beam quality
MLL-F-975975 nm near-infrared CW laser
975 nmMLL-F-975 is a 975 nm CW laser. Used for measurement, communication, spectrum analysis. Low Noise Infrared Laser ��. Key specifications: output / average power 5~8 W, operating mode CW, power stability (rms, 4 hours ± 3°c) <2%, <1%, <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MLL-F-975
17 specification rows
| Output / average power | 5~8 W |
|---|---|
| Beam / notes | Low Noise Infrared Laser �� |
| Operating mode | CW |
| Power stability (rms, 4 hours ± 3°C) | <2%, <1%, <0.5% |
| Transverse mode | Multimode |
| Noise of amplitude (rms, 20Hz-20MHz) | <1%, <0.5% |
| Beam divergence, full angle (mrad) | <3.0 |
| Warm-up time (minutes) | <5 |
| Cooled method | Air cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA/PSU-H-LED |
| Expected lifetime (hours) | >10000 |
| Central wavelength (nm) | 975±10 |
| Output power (W) | 5-8 |
| Beam diameter at the aperture (mm) | ~5×8 |
| Beam height from base plate (mm) | 45 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
Application context
Why this design is used
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
Communication
MLL-F-975: 975 nm emission must sit inside the fiber-component passband used for Communication; connector polish, fiber mode, linewidth and back-reflection tolerance should be specified as one optical interface.
Spectrum analysis
MLL-F-975: 975 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (Multimode) also controls focusing and collection geometry.
System integration
Integration and compatibility
Use these checks to connect MLL-F-975 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Cooled method: Air cooled · Operating temperature (℃): 10-35
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: Multimode · Beam divergence, full angle (mrad): <3.0
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for MLL-F-975
What cooling does the MLL-F-975 require?
Cooled method: Air cooled · Operating temperature (℃): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the MLL-F-975 deliver?
Transverse mode: Multimode · Beam divergence, full angle (mrad): <3.0. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MLL-F-975 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MLL-F-975 (current) | TEM-LN-975 | MLL-III-975L |
|---|---|---|---|
| Wavelength | 975 nm | 975 nm | 975 nm |
| Optical power / pulse energy | 5~8 W | 1~1000 mW | 1~200 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | Multimode | <1.5 | <1.0 |
Related cw lasers
Compare the MLL-F-975 with nearby cw lasers across the wavelength range.
