Measurement
TEM-F-905: Measurement benefits from a stable, focusable source. 905 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (TEM00) informs waist size and propagation.
Power stability, linewidth, beam quality
TEM-F-905905 nm near-infrared CW laser
905 nmTEM-F-905 is a 905 nm CW laser. Used for measurement, communication, spectrum analysis. Laser. Key specifications: output / average power 1~60 mW, operating mode CW, power stability (rms, 4 hours ± 3°c) <2%, <1%, <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
TEM-F-905
18 specification rows
| Output / average power | 1~60 mW |
|---|---|
| Beam / notes | Laser |
| Operating mode | CW |
| Power stability (rms, 4 hours ± 3°C) | <2%, <1%, <0.5% |
| Transverse mode | TEM00 |
| M2 | <1.1 |
| Beam divergence, full angle (mrad) | <1.5 |
| Warm-up time (minutes) | <5 |
| Operating temperature (°C) | 25±3 |
| Power supply (100-240VAC) | PSU-III-FDA/PSU-III-LED/PSU-A-D |
| Expected lifetime (hours) | >10000 |
| Central wavelength (nm) | 905±10 |
| Output power (mW) | 1-400 |
| Ellipticity | >0.95 |
| M² | <1.1 |
| Beam diameter at the aperture (1/e2, mm) | ~1.0 |
| Beam height from base plate (mm) | 25 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional |
Application context
Why this design is used
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
Communication
TEM-F-905: 905 nm emission must sit inside the fiber-component passband used for Communication; connector polish, fiber mode, linewidth and back-reflection tolerance should be specified as one optical interface.
Spectrum analysis
TEM-F-905: 905 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (TEM00) also controls focusing and collection geometry.
System integration
Integration and compatibility
Use these checks to connect TEM-F-905 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Operating temperature (°C): 25±3
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: TEM00 · M2: <1.1
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for TEM-F-905
What cooling does the TEM-F-905 require?
Operating temperature (°C): 25±3. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the TEM-F-905 deliver?
Transverse mode: TEM00 · M2: <1.1. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare TEM-F-905 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | TEM-F-905 (current) | TEM-LN-905 | MLL-III-905L |
|---|---|---|---|
| Wavelength | 905 nm | 905 nm | 905 nm |
| Optical power / pulse energy | 1~60 mW | 1~60 mW | 1~70 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | TEM00 | TEM00 | Near TEM00 |
Related cw lasers
Compare the TEM-F-905 with nearby cw lasers across the wavelength range.
